05/27/2021 Its been a while but all is well, the red light only seems to have encouraged lots of new growth. But I think I'm going to stick with 25-50% blue spectrum and 100% red for the finish. I'm kind of disappointed that she has no distinguishing smell, but she was bred for resistance to PM specifically. All the good stuff will come once i have stabilized consistent PM resistance. (Work in progress) Then the good stuff will be worked in..... If needed. Ps. I do believe it will likely be 12+ weeks of flowering to finish (Hope she has a racy/trippy sativa side) fingers crossed🙏

So far only minor PH problems after messing up a good feeding rhythm by flushing during flower transition, apart from that it’s been straight forwards! Absolutely can’t wait now! Very excited and she is SUPER super fragrant! Very sweet, notes reminds of that smell when you walk into a bakery, fresh baked sweet goods!!! She started to throw her sugar during week 2! right at the start! I am in for a treat with this one!

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Well, another week has passed and they are growing very well, now it's a matter of two to three weeks for me to change them to flora, this week I did a little defoliation on the plants and watered them again with top crop top veg fertilizer and I also did some bindings known as low stress training. =D

Hello growers,💚 beautiful and strong plant .No problematic flower.🦍🦍🦍 Hnojení jednou týdně . Občasné pro oddělení půdy .

My first time making alcohol tintcure Using the c1 , Hold on tight gonna be a trip

Fantastic week! Frosting up and packing on some weight!! She’s so pretty 😍

Pretty resistant to wpm but still susceptible. I'd like to breed in more resistance but that may lower cbd content. So we will see what she taste like and go from there and

Smell ♥️ but i will not grow this strain again

Hello Diary. It ended the second week of flowering on my little Farm. Sherbet Queen has become the lowest plant on the Farm. Both of her roommates, Mimosa, outgrew her. But honestly, Sherbet Queen looks the most beautiful of all three plants. The plant has received its final form and now it remains to develop flowers that are already covered with trichomes which gives them the snowy appearance. The branches are not elongated as in Mimosas so the flowers nicely cover the branches, especially the main cola. We’ll see how the flowers continue to form and fill in, but for now, all is well, this time I don’t have any problems on the farm. Watering is now every two days, I added CalMg preventively twice and added one Easy Bloom Booster tablet. Conditions at the "Farm" are not ideal, the temperature is around 29 degrees which is expected given the summer months. Here’s what it looked like last week. 14/06/2021 - Day 30. Watering. I always prepare about 8 liters of water, I regulated p.H. at 6.5, added 1.5 ml / lit CalMg and one Easy Bloom Booster tablet. With that, I watered all three plants evenly. Temp / Humidity on the farm - 27.6 degrees and 40% humidity. 16/06/2021 - Day 32. Watering. I lowered the p.H to 6.2 and added 1.5 ml / lit CalMg. Temp / Humidity on the farm - 29 degrees and 50% humidity. 18/06/2021 - Day 34. Watering. This time I didn't add any extras, I just lowered the p.H to 6.4. Temp / Humidity on the farm - 29 degrees and 50% humidity. 19/06/2021 - Day 35. Photography and height measurement. Sherbet Queen Auto - 88 cm That’s all for this week, see you soon.

Defoliated and fully leaf stripped. I am going all out to see what happens. Wedding gelato is a fairly tall plant for my tent and future grows will have to be properly trained and tied down. Live and learn. So far happy with the results from hydro grow. Roots have worked their way into the res so I have added an air bubbler to the submerged roots.

pH was still leaning towards the low side earlier in the week, but by Saturday's watering, pH is within desired range. Indoor AC unit is broken this week (will be replaced by next week) - but have been improvising to perform temperature control inside the tent as much as possible. Daytime light is currently set for overnight, as to mitigate overheating during summer months. During this week while we are improvising, the focus is on keeping the tent temperature as close to 80 degrees F (ideally below, but with outdoor air temps being around 100 daily, this is difficult this week). Using ice buckets and multiple oscillating fans to control the temperature as much as possible. Plants are under some stress from this, but leaves are not wilting and are only slightly discolored on some of the tips, which has improved with Saturday's heavy nutrient feed. Will update next week once AC unit is back and tent conditions are more under control, but thankfully plants seem to be making it through, and should bounce back quickly once conditions are back to normal. Nutrient type was switched to Fox Farm Big Bloom; a heavy feeding was performed on Saturday as the plants were a bit nutrient deficient, but will return to maintenance feedings on next feeding. Tuesday's Watering: Plant 2 - 1.25 gallons of water (pH: 5.41) - 0.5 tsp/gal of Bergman's Plant Booster Plant 3 - 1.25 gallons of water (pH: 5.56) - 0.5 tsp/gal of Bergman's Plant Booster Plant 4 - 1.25 gallons of water (pH: 5.91) - 0.5 tsp/gal of Bergman's Plant Booster Saturday's Watering: Plant 2 - 1.5 gallons of water (pH: 6.43) - 1/2 cup/gallon of Fox Farm Big Bloom (heavy feeding) - Height: 28.74 in Plant 3 - 1.5 gallons of water (pH: 6.27) - 1/2 cup/gallon of Fox Farm Big Bloom (heavy feeding) - Height: 23.23 in Plant 4 - 1.5 gallons of water (pH: 6.54) - 1/2 cup/gallon of Fox Farm Big Bloom (heavy feeding) - Height: 27.56 in ***General Hydroponics pH UP solution added. Will hold on next feed to re-assess where pH levels sit, now that they are within desired range.

8/23 I WATERED THE NATURAL MK ULTRA AND THE 10TH PLANET IN THE BACK WITH A GALLON AND THE TWO TENS SPLIT A GALLON. It's hotter today and the wind is picking up. I wish I had gotten rid of that plant when I thought to. Oh well. I'm going to have to bite the bullet and treat things. Smell is increases as well as flower size. However I'm noticing more leaves that are yellowing and falling off. Smell has intensified. The special kush in late flower doesn't seem to be producing trichomes like it should. Or maybe it's still early. I see some but by this time I would think it would be frosty as hell! It's rained like once this summer. I've put tons of work into defoliating. I'm not sure if I'll try a controlled spray trying to avoid buds or if I should use a sponge and just hit every leaf. At least I'm seeing that the buds are still expanding and smelling despite these invisible Bastards. It's not like I see them. Even my traps only caught like one. I'll update as I go. EDIT: WATERED THE TENTH PLANET AND THE LATE SOECIAL KUSH 1 GAL. PLAN ON FEEDING TOMORROW. I DID A SHIT TON OF DEFOLIATION. I DONT SEE ADULT THRIPS BUT I SEE THE EGGS AND SHIT IN THE CREVICE AND SOMETHING IS COMING AND EARING SMALL LOWER FOLIAGE. I RIPPED TWO INTERIOR BRANCHES OFF THE PLANTS I TREATED BEFORE WITH CITRIC ACID BECAUSE I FOUND A COUPLE STOPS OF MOLD ON THE STEM. AFTER RESEARCHING THRIPS WITH A.I. UNTIL IT LITERALLY CHANGED PROTOVAL AND STOPPED HELPING ME SAYING IT DANT HELP CULT8VATE CANNABIS AFTER GIVING ME SEVERAL DIFFERENT INSTRUCTIONS AND OPTIONS. I SCREENSHOTTED THEM THOUGH. I USED THE SAME MIXTURE OF CITRIC ACID AMD DAWN ONLY HALF STRENGTH AND HIT THE 10TH PLANET AND PINK KUSH THAT ARE PATIENT ZERO. THEN I TOOK A SPONGE AND EITHER DEFOLIATED OR WIPED THE LEAVES WITH A SPONGE AND SAME CONCOTION ON THE SPECIAL KUSH IN THE TEN. I DEFOLIATED MORE AND THEN "SPOT TREATED" A FEW LEAVES ON A BOTTOM BRANCH OF THE 10TH PLANET WITH MITE X. I'M WAITING UNTIL THE MORNING TO SEE THE RESULTS AND BEFORE I MOVE FORWARD. I HAVE ORGANOCIDE BEE SAFE AND I KNOW IT WORKS GOOD BUT IT SMELLS LIKE SHIT. IM HOPING ILL FIGURE THIS OUT. 8/24 Didn't have time to do a video or take any pictures. I pit a lot of work in the garden yesterday. I removed a couple small branches that had mold on the stem. If I had listened to my intuition and moved that plant (instead of listening to my dad) I probably could've negated this mess. Windy as hell yesterday. Maybe that's why I don't see mich damage from the thrips. The runt in the 50 has some silver ingredients on it. I'm considering using spinosad. Those are way earlier in flower and that shit WORKS. WATERED TODAY;BIG MK ULTRA 1.5, THREE IN THE BACK ROW, CHEMDOG AND TENTH PLANET ALL GOT 1 GALLON. THE TWO TENS SPLIT A GALLON. I THEN FED EVERYTHING WITH A QUART OF FOOD. I'll keep an eye out on the dosage and see what the can handle. I left out plant doctor as I'm dealing with thrips. Took a leaf that looked like sep off the pink kush in the 50 with half used soil. I didn't have much time to look around but I will when I get back and I'll put some vids/pics up. The plants that I treated with citric acid looked no worse for the wear and actually BETTER than they hadcthe day before. The other 10th planet and the Pink kusg in the ten are the worst. If I can't beat it I may junk them. I'm planning on treatingvtge plants I didn't yesterday tonight. I may use a different treatment I'm not sure.

Week 7

This week I noticed the buds got more bigger but also the calcium deficiency has gotten worse and so to battle that I added gypsum to the medium and gave them two waterings with banana peels 🍌in the water ( I read banana peels give off Potassium, Phosphorus, Calcium, and magnesium) hopefully they bounce back and my yield isn’t affected too bad.

Memes for the fastbuds meme contest Memes for the fastbuds meme contest Memes for the fastbuds meme contest Memes for the fastbuds meme contest

Ladies have taken off! Finished week 2 with no issues in sight. I’ve been working my yoga poses to get under the scrog to clean and spray some essential oils for pest management. Also added some sticky traps, haven’t seen anything, not even a gnat, but can’t be too careful this time of year. I’ve been pushing her nutrients and got close to 1100 ppm, some slight burn at the tips was noticeable, but nothing else. Did some defoliation and the smells are strong! Perfect terp profile that I’m looking for, Gas, funk and skunk 🇨🇦❤️🌱😎💨 Happy Growing!

hello guys this week the explosion continues i spent the light at 24 h i think another two weeks is the minimum i doubled the molasses i need to oxygenate the room a lot these monsters are intertwining with each other in an incredible way i didn't imagine they could pull up so much it seems the height has been limited by the time I can't imagine these specimens outdoors, I will introduce air with a larger fan I have totally defoliated the highest one hoping it will produce more on the parts close to the light but I am wary of this. all the others seem to me in great shape but hopefully ... in something better, unfortunately I had no way to prepare sea of ​​green in any other way and I gave this tent a chance, I increased the molasses by double but I always divide in four five waterings at the end of the evening I rinse only with water. I enjoyed pruning this giant bonsai but I gained a lot of air hopefully all goes well