Likes
Comments
Share
All going well still feeding at fill strength. There getting a good covering of trichomes now. The black orchid smells exceptional!
Likes
11
Share
Likes
16
Share
She is budding nicely now, looking like 16 colas once they have fully developed. Now starting to a get sweet smell. Very nice purple colours are now appearing. I cant wait to try this strain.
Likes
12
Share
@ChiTaN
Follow
I am more and more fascinated by this strain! Lighting from Bilberry.pl does a great job!Harvest in 1-2 weeks 🙏😀The smell is insane😍
Likes
7
Share
Well, not much has changed, so it's kind of like 'same same but different' around here. The plants are still vibing, doing their thing, just with a little more oomph this week.
Likes
44
Share
just chugging right into the 2nd week of flower. This variety is 8 week flower on the nose, so Ive got 6 weeks left on this one. Will prob be the first plant I harvest this year. Pray for consistent rain for the next 6 weeks
Likes
3
Share
November 2nd - 38 days since first sprout. The plants were just top dressed for the flowering phase of the grow, the top dressing is as follows: 3 tbsp of bloom 2 tbsp of mineralized phosphate 2 tsp Alfalfa meal 2 tsp Kelp meal 2 tsp Dolomite lime 1 tbsp Basalt rock dust 2 tbsp worm castings This was for each plant. I don’t see any deficiencies so far in the run, at least none to be worried about. The plant that actually has NO training to it besides a structural support stick actually has yellowed out tips, I couldn’t figure out why but it doesn’t seem to be an issue yet. My main cola for my middle back plant unfortunately snapped when performing some LST on her, completely wrecked me but I just kept it going cause what else can I do? Yknow? lol
Likes
12
Share
temps got a little crazy a couple days(up to 90) but was able to keep them below 85. Realized this week I've been running an undersized exhaust fan(4" 165CFM) when I should've been running a 6". With my size room, ducting, and a carbon filter I need a minimum 260CFM. The 6" is rated at 400CFM which is more than enough. Can't believe I'm just now realizing this. Should bring temps down significantly
Likes
26
Share
The plants have taken to their Earthboxes, especially #1 with the BuildASoil Light. The Earthbox with my Coots mix was the runt, plus I damaged the roots during transplant so it has an uphill battle, but I wouldn't count it out yet. It was looking droopy and with slight discoloration, but after a drench of Kashi Blend Tea (1/3 cup Kashi Blend, 1 teaspoon blackstrap molasses in 1 gallon of water for 24 hours) it perked right up. As for preventative pest management, I've kept doing foliar applications every 4 days of EM-FPE -> EM-1, next week I will incorporate the just-finished EM-5. I made a JADAM wetting agent (JWA) but I have realized even local bottled water is too mineral-heavy for it, so I will need to find a source of distilled water if I want to use it in my foliar regime. Next week I will begin doing LST to get some more tops going. At some point I plan to add a trellis, I have been busy with work but I will find the time to set up something, preferably a trellis that can move with the Earthbox to facilitate maintenance and not have them fixed in place for the entire training and flowering cycles.
Likes
15
Share
Moved this week so mostly just fed them. Switched to just water.
Likes
2
Share
Has a strong smell already in week 4 of flower
Likes
2
Share
Que pasa familia, vamos con la cuarta semana de floración de estas Forbidden Mochi feminizadas de Seedstockers. Vamos al lío, las plantas se trasplantaron a macetas de 7 litros. El ph se controla en 6.5, la temperatura la tenemos entre 24/21 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 12h de luz, el foco está al 75% de potencia. Tenemos como visitante de nuevo los trips, compré depredadores que colocaré a principios de semana. Me gustaría estar más encima este cultivo pero la salud me está impidiendo un poco estar 100% con el proyecto. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨
Likes
3
Share
📆 Semana 9 La Monster Maker entra en su fase final de lavado de raíz. Los cogollos mantienen su dureza y la capa de tricomas sigue brillando con intensidad, mientras la planta termina de consumir sus reservas internas. Los pistilos oscurecen completamente y los matices terrosos del aroma se vuelven más redondos y nítidos, dejando que el dulzor y las especias destaquen. 💧 Lavado final: limpieza interna, aroma puro y resina lista para el corte. ¡Seguimos creciendo fuerte 💪!
Likes
24
Share
@Grimcat
Follow
Day 47: LSD 25 is really starting to smell amazing! Notes of pine, citrus and sweet berry.
Likes
19
Share
One more week until this big girl gets to move to the flower tent. Photos/video taken 70 days after breaking soil.
Likes
26
Share
@Gzuscamp
Follow
This is my first hydro grow and first time with clones. I have a few semi successful outdoor grows under my belt but the weather (hot AF) and caterpillar apocalypse (lost a beast of a plant and the tops of most others) last year are forcing me inside. Reservoir is an hdx 27 gallon tote with 15 gallons of actual water capacity about 1/4” under net pots. Attached to 1/4 hp active aqua chiller (overkill but got a deal and am in so cal; last years consistent 100+ temps ravaged my outdoor grow and can even make indoor temp regulation difficult) with two 5” and one 4” air stones in main res and one 4” in a 5 gallon top off res (not part of the system until/if I need it) attached to two 15L/minute active aqua air pumps. I wanted to have a bit of a barrier between the ambient temps inside the tent (rest of the room is a/c controlled) and the actual reservoir so I built a base to set the tent sans bottom putting the top of the res at the floor of the tent. This also raises the reservoir off the ground and hoping it will save some back aches once scrog comes into play. This also frees up 16” of vertical space inside tent and although I intend to scrog it should help as a buffer with temps and I won’t have to worry about light distance since plants are at floor level. To keep as much unnecessary heat out of the 4x2 tent the spider farmer light ballast was removed and relocated to outside the tent which I’m glad because during testing the ballast and light are each producing 120 degrees. Half of that is outside the tent allowing the temps inside the tent to stay about around when room temp is about 78 (a/c off but weather is fluctuating) with a small fan at base level and a 6” clip on fan for higher up. Reservoir will be 66-68 at all times thanks to the chiller. For ph management I am going to be using a torus hydro perfect ph (35 gallon). I’m hoping their claims aren’t just hype because they say it removes H+ and OH- ions to allow the ph to maintain 5.8 - 6.2 ph (without any additional buffers). This small fluctuation allows all nutrients to be taken in while a stagnant ph will prevent certain nutrient uptake hence a more complete usage. These are claims among others they made, let’s see if the science is legit. Unfortunately this being my first hydro grow I have no standard to base this off, but if I don’t have to worry about my ph that’s one less worry. Nutrients will be GH flora trio and cal-mag plus hydroguard. Not sure about additional additives, want to keep it pretty basic but suggestions for this nute/strain combo would be appreciated. I was intending on growing wedding cake or venom og but cake was sold out and venom didn’t look great so I ended up coming home with two gelato clones from universal nurseries. I’ve always liked this strain but wanted the cake because I’ve read it’s highly resilient. What I was not expecting was that these would be rooted in neoprene. I’m new to hydro and aside from the research and reading throughout my grows I usually overlooked neoprene. I guess it could be better than the rock wool as it shouldn’t leach and mess with ph? They are surrounded by hydroton and will be hand watered until roots make it to water. Update day 6: I went against my better judgment and initially painted my lid for light leakage. Ended up dumping my entire reservoir two days in because it was full of paint chips (even though it was formulated for plastic it still chipped off in high volume). Used a drill pump from HD, worked well as the intake is a 1/4” pvc tube I could suck up the paint chips and the water, but DO NOT USE to transfer anything but waste water as the output contained grease from the pump! Got a new lid and will just be using panda film for light blockage. Added a small humidifier because rh was in the 30-40 range, now temps and rh are consistently 70 degrees and about 65%. Nutes are 1/4 strength except calimag due likely to stoned math... Plants don’t seem to be minding so I’m not trying to sweat it much. Slight upward drift in ppm and ec as water is taken in or evaporates and ph is slowly swinging in the range torus hydro said it would so that is a success as I have not used any buffers. They claim it is more effective when it can directly interact with a root mass so it seems promising. New growth sprouting all over but no roots have made it out of the net pots. I went with 6” hoping roots will branch laterally exposing move root mass to the air gap once developed. Started noticing slight yellowing of leaves day 4 and some drooping (due to low rh as they perked up after adding humidifier) so I went from 50ml top feed daily to 100ml, also turned light down to 15% and everyone is happy.
Likes
11
Share
@tangie
Follow
Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?
Likes
Comments
Share
Venga familia, cosecha de estas Frosty tooth de Seedstockers, que ganas que tenía. No veas que pinta marcan estas plantas. Las flores aparte se ven bien resinosas y prietas, aparte son aromáticas huelen bien fuerte. En general es una genética con la que disfruté bastante cultivarla, la genética es perfecta para cultivos de floración corta con rangos entre los 20/25 grados en interior, es de dificultad media cultivarla y bien resistente, es excelente para cultivadores algo experimentados y con algo de conocimientos. Hasta aquí es todo, espero que lo disfrutéis, buenos humos 💨💨.
Likes
48
Share
@AsNoriu
Follow
Day 57. Statement : Even with hard beginning - thats my best run ! Zamnesia is AMAZING !!! With veg hiccups, they still bushout to really nice plants in less than 7 weeks. Now Blue Dream is targeting my roof, Kalini Asias are thick as f@ck. Runtz very dense plants, thought they would be a bit bigger ... They drink every 36 hours, hard to keep up with work, but i do my best not to screw up with them ;) This week : feed, water, water. Defoliation too !!! Day 59. That game - "who will reach sealings" - I don't like !!!! Moved lights two days ago ... Soon i will need axe for my roof !!! ;)) That Monster Blue Dream is insane !!! Hope will do heavy defoliation in two days, maybe this will shock her ;))) other plants keep up with her and canopy is even without all three Blue Dreams. Huge plants. Day 60. Video is showing how less space is left, but they just keep climbing !!! ;)) Day 61. Thinking to defoliate all girls tonight, but maybe i will do it after next watering. Had to reposition them, loads of branches need to be chopped, some didn't see light for last two weeks( Curly, looks like sh$t, will never reach light). Girls are too big for my setup and i really hope it will be enough light and HEIGHT for them... And so Defoliation has started !!! Hope everything will go fine !!! All done !! With the thought " WHAT HAVE I DONE !!!!??????!!!!!" i go to try to fall asleep ;))) Happy Growing !!!
Likes
13
Share
Eccoci qui... Ormai manca davvero poco ci siamo quasi.... Ora niente più fertilizzanti solo acqua ed attendiamo la maturazione.. Seguiranno aggiornamenti, grazie a tutti per il supporto🔥🌲❤️