It all started out even under the scrog when something came up I tucked it under but for some reason I have a little uneven canopy I'm not complaining it's the first time I've ever tried it I just wish I could figure out why I have that uneven now on the side that's growing a lot I have reflective material on that side and I'm thinking maybe that's the only thing it could be I see a little nuke burn at the tips of the leaves but he's okay I went with pure RO water this time she should be flushed pretty good now

Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎

Day 17 05/19, welcome to another week of this comparison grow between FoopCanna and Down To Earth. So the two plants getting Foop are growing slow but growing. However, on the other side we got two plants in Down To Earth and both are twice as big. Had to defoliate and do some LST on those two to try and have a even canopy. Day 20 05/22, so almost at the end of the week and the plants are still going. The DTE are by far looking better in my opinion. FoopCanna looks like they might start taking off. Other than that they have all been defoliated and 3/4 have started LST.

Ciao a tutti, il giorno 65 ho sostituito tutta la soluzione dei vasi. Dopo aver tirato via tutto ho aggiunto 20 litri d'acqua di rubinetto con 2ml/l di flora kleen (GHE). Non ho aggiustato il pH (che nella mia zona è superiore al 7.5 per l'acqua di rubinetto) tanto non ci sono sali disciolti da assorbire. Tra pochi giorni ci sarà la raccolta, sarà un'impresa pulire tutte quelle cime... PS le foto scattate il giorno 66 sono state fatte con un altro telefono

6 settimana di fiori e tutto procede bien

At long last, the trimming has finally ended. This diary was started late in her life but the age of her was accurate at the time. We had many outdoor issues with her, some normal and some not so normal. For starters, the mildew was expected with this strain but we grew it anyway and we fought it all season long but in the end she came out of the wash looking pretty clean. It is possible that this could have to do with the fact that the raccoons had a swim in our little pool and upon leaving they tore it. This of course flooded some parts of our yard and this girl soaked up the most of it, she bleached quite a bit but she seemed to recover slowly over the following 5 weeks. Bud rot was not at all an issue and the final months of the outdoor growing season were spectacularly beautiful, most of our trimming took place in the sunshine this year. Please note- there was no time for weighing in nor is it a concern for us.

Things still chugging along nicely. Noticed a little leaf tip burn on one but its not bad at all. Gave one feeding of only water. Plants need to be defoliated a little. I have not been taking leaves off every day so I am in need of some clean up. Will tackle that this week. If at any point you guys wanna check out my grow live please visit my Youtube page https://www.youtube.com/channel/UC7345iXI2LnTIG1mmONKtPQ Thanks for visiting my Grow!

Mais uma semana de poda top e defoliação. As plantas que revegetaram , já voltaram a floração, estão em boa recuperação. Difícil ter que segurar a vega sem poder mudar pra flora pela falta de espaço.

the girl has already matured :) tomorrow will be the crossing and renewal :).

This week was over 100 heat index for several days but the plants did not require any more water than normal. I feed with compost tea at 600 ppm at the begging of the week the night before the heatwave. Then again with cal-mag water 2 days later in the morning and they have been holding onto steady moisture for 3 days I wanted to hold off on watering because we have some rain in the forecast. I also topped of with a cup of BSF frass and quarter cup of neem seed meal before feeding the compost. Still not Mantis cocoon hatch! Sti have not got clones yet, s i have it cleaned the bottoms or defoliated yet as I want to use them.

Fast version B is doing good. She us vegging right along. Everything is looking good. Thank you, Dutch Passion, SSSC, Athena, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Alles wird Gut =) First day. Clones.

I’m loving week 7 of flower for the plants on 11/28

Quarta settimana di fioritura 😉🤔💪🦍

New week for the Chocobang 🎶🎶Look at chocolate salted buds stick in your bong and smoke it 🎶🎶 I think the Chocobang needs couple days more then the rest but it's going great there at a size that adding extra nutrients is waste and only making flushing take longer so starting to lower all nutrients and preparing for last week exited times Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Smell has increased in a good way. 2 of the 4 plants main colas are turning purple, very cool. One plant has yellowing of the leaves even though I stuck to fox farms recommend fertilizing schedule. There is. 4” height difference between the 2 taller and shorter plants. This week I put some books under the shorter ladies to give an even canopy height.