Looks like she might be starting to Flower only been 5 days

Another good week. She's filling out nicely now.. her citrusy smell is starting to come through. Had no issues this week.. planning on adding some boost to her next few feeds.

We added a new member to the family yesterday a BCN Critical XXL Autoflower from SeedStockers in a 5 gallon with soil and perlite mix. He said he has been having a little trouble with temperatures being too cold but he has been figuring it out and he almost has it under control and it shows. They are all looking great. They are going to start flower soon. I think hes in for a treat. I am working on a flowering feed guide for him. He has been doing great with minimal nutrients so we will keep it that way.

01/08/18 - I fed them all 1 litre each, one of them seems to be praying up but the other two Seem a little bit droopy still. 02/08/18 - #3 is praying like usual and the other two are getting better Day by day I’m going to be giving them another feeding tomorrow, I have seen roots stretching out to the sides of the pots so I might saturate the whole pot. 04/08/18 - horrible sight today looks like rusty cracks in some leaves , not got a clue what this. 05/08/18 - browning has continued since last night and it’s all on the new leafs not the older ones. i fed them without any calmag , so I think it could be a deficiency of some sort (cal/mag).the mad thing is, it’s only two of the girls, one of them is completely fine nice green leaves not yellow marks that turn orange/brown. It definitely has nothing to do with my ph or all three girls would be showing some symptoms seeing as they all get fed with the same soloution.✌️🏻 07/08/18 - everything’s cleared up their was slight nute burn in the process but everything seems a lot better so I decided to start LST. all the new leaves are the colour they should be with no nute burns or calcium deficiency 🙏🏻

Alright folks! So this harvest was fantastic! I mean! I’m a happy grower at harvest for any plant! I could harvest one amazing and one meh and be just as happy to cut dry and cure them both! This early miss smoked well and is only about two weeks in cure, this is a rank and musky strain with a whole plethora of combining smells, I find it had a massive pepper and spice hit with almost a food like consistency with its smell, I’m finding a even pine, spice, earthy almost cheesy platform with a fine kick of just a odd but interesting odder I can’t put my thumb on! The density of even the popcorn flower is unreal, rocks all of them. A very light almost desert sandy trichome layer in the interior of the nugs but toward the exterior it’s a lush dark green and red hue with purple calyxes also being seen from the top and Bottom inner and some outer calyxes. The trichome production was very impressive also the fast growth in veg was awesome! But I’m telling you! The big bud genetics and the white widow genetics in this are both prominent, and I love it! I’m saying for a auto it’s pretty potent! And not to say that other autos aren't! We all know they can be pretty Damn amazing! But yeah! The flavour is that of pepper and spice! Pine and a gassy greasy fresh herb blend! I wish I had taken more time to run her though because I believe if I had kept running her, her potency would have been a bit higher and definitely would have achieved a more full couch lock. But over all a easy grow and a dense dense grow. I recommend dropping rh and bringing head up a tad at the end to make those nugs as hard as you can! But that’s my bro advice lol

Strawberry Gorilla Auto - FastBuds Welcome to week 11 of my grow diary, which is also the last week. As predicted last week, the weather has become even warmer. The heat has now completely taken over the house, and it has also rained for a few days, causing the humidity to rise again. Unfortunately, this led to mold forming on one shoot, so I decided to take action. Normally, the plant could have stayed in place for another 1-2 weeks for my needs, but I didn't want to take any risks and harvested it in week 11. Overall, I was satisfied with the growth of the plant. Environmental conditions are unpredictable in summer and more difficult to control than in winter/spring. I was able to gain more experience with this grow and now know that I should take a break in summer from now on. I really liked the mainlining. Before, I topped above node 2 and left 4 main shoots. With 2 main shoots, it is much easier to work with and does not require as much defoliation as with 4. I will definitely use this technique again in the future. Here's some initial feedback on the Strain "Strawberry Gorilla Auto" from FastBuds and the Organic Starter Kit from Advanced Nutrients: The plant grew really well and has enormous potential. The buds were so swollen towards the end that I was amazed. The organic fertilizer from Advanced Nutrients probably also had an influence. This was my very first purely organic grow, and I think I can be satisfied with the result. I can wholeheartedly recommend the fertilizer. I will definitely use it again in future projects and will probably do a comparison grow between the mineral and organic starter kits. Avg. Temperature - 27°C Avg. Humidity - 68% Avg. VPD - 1,16kPA The lamp runs at 60% which is 356w according to the energy meter. At a distance of 20cm the plant gets around 950-1100ppfd. Thank you for following me so far. I will give you an update after it has dried. I hope you enjoyed my grow diary. If you have any questions, please feel free to ask me. See you next week ✌️ Soil: Plagron Lightmix N 180 mg/L - P 210 mg/L - K 360 mg/L Fertilizer used: Advanced Nutrients - Vodoo Juice Plus Advanced Nutrients - Iguana Juice Bloom Advanced Nutrients - Big Bud Tent: AC Infinity Cloudlab 844 Exhaust air: AC Infinity Cloudline T6 incl. activated carbon filter Lamp: Kingbrite P55 / 480w, dimmable Fan: AC Infinity Cloudray S6 Gen. 2 Controller: AC Infinity Controller 69 Pro Pots: Gronest 25L PH Pen: Bluelab Onepen

Everything is doing good despite me not having ac at the moment! House has been staying at 85 degrees so the plants are happy at least. Plan on solving the ac issue by next week to start possibly flowering soon 🤞🤞. No health issues to report, just added another fx3 to the 3x3 to have 2 different phenos!

It wasn't the best Fastbuds Gorilla GLue specimen we've made, so to speak it's one of those pheno that is probably getting low this time because the ruderalis lineage somehow prevailed. but excellent anyway not the most productive but very full of resin as I mentioned here Fastbuds certainly maintains a very high quality standard on all strains. Dried well and tasted just for the test of the creator now it tans a bit and then it is smoked .. indeed it is vaped.

————————————————————— WEEK 4 / DAY 22-28 Mars Hydro FC-E3000 Floragard Professional GrowMix 11L Plant bag made of fleece Light: 55cm / 50%; Schedule: 24/0; PPFD: 592 umol/m2/s 20° C - 75 RH 300ml per Plant every 2-3days PH 6,5-7 1ml BioGrow; 0ml TopMax ; 0ml BioBloom 1ml CalMag #1 Royal Critical Automatic #2 Royal Critical Automatic Fan, extractor and pump ON 24/0. ————————————————————— -10.02.2025 The third vegetation week begins, the ladies look really good. The lamp has been set to 55cm and is running at 50%. The lowest leaves with the rust-colored spots have been removed. -13.02.2025 The GrowBox was cleaned and disinfected once. The lowest/oldest leaves were cut off. As the soil had settled after a few weeks, the pots were filled with fresh soil. -16.02.2025 Today is the last day of the third week of vegetation. The plants look good, so far everything is quite unproblematic. Total Time: 701:00h Total Energy: 107.07kWh

Vegetative state week 4. Going strong, making roots chase the water and going to do a little high stress training instead of filming this time I’m going to just grab the main stock bend pinch ,laid over to get those side branches thrusting.

Day 52 - Fat Monkey Auto from @anesiaseeds Nutrients: @atami_deutschland / @atami.international / @stefan_atami / @daniel_atami Soil: @promixgrowers_eur / @promixgrowers_global / @promixgrowers_unfiltered / @promixmitch LED: @powerlux_spain Tent: @secretjardin_ Thank you to everyone who follows and supports my work 🙏🏻💚 This means a lot to me and you should know you are a part of it and only with you all this is possible, you are the best community 😎 Growers love, love for everyone

I'm so happy with this girl! I'm glad she got stuck in preflower. It gave her time to get nice a big. She's going to be a beautiful beast!! The down side is now my tent is on 12/12. I have all these autos I want to start. I guess I'll get some photos started. Going to clean her up today and top dress her with a new Greengro flowering nutrient I just received.

MrJones VIPARSPECTRA XS1000 LED 📜 SUMMARY - I have been given the opportunity to run the next generation of LED lights by VIPERSPECTAR, the XS1000! I set up a Stealth Cabnient and moved 3 Cream Manderain Auto XL.s under these lights, the cabinet set up is automated with WIFI light controllers, and INKBIRD Temperature and Humidity Controllers, I am very excited about this opportunity! Specs and Discount Codes Listed Below. 🔹🔹🔹🔹🔹🔹WEEKLY GOALS 🔹🔹🔹🔹🔹🔹 🌞Environment - 80F and 50%Humidity - using Humidfyer as needed. 💧 Feeding - Feeding with FOOP Canna Organic Nutrient Line 🍃Training / Keeping Stems Stable and Strait 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡 Vegetation & Flower (new) Viparspectra XS-1000 Release on March 15th. 🔹🔹🔹🔹PLANT UPDATES🔹🔹🔹🔹🔹 🌱 Plant #1 - Week 4 this plant is stretching sideways and is about 14 inches wide not. 🌱 Plant #2 - Week 4 this plant is stretching sideways and is about 14 inches wide not. 🌱 Plant #3 - Week 4 this plant is stretching sideways and is about 14 inches wide not. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️Monday 03.15.21 / Rge gurls are recovering well from their topping and training! ▶️Tuesday 03.16.21 / Feed with 30 ounces of FOOP, the girls are doing extremely well! ▶️Wednesday 03.17.21/ Admiring their growth - keep adjusting their tie-downs, the plants are about 14 inches wide - across and about 7 inches tall - there are so many bud sites being produced here and the plant is about to go into flower, I am hoping for amazing results. ▶️Thursday 03.18.21 / Fed tonight with about 30 ounces of FOOP Nutrients - I just can't say enough good things about this product so far! ▶️Friday 03.19.21 / The sister plants of thee ladies are in flower, these girls are entering into flower a little slower due to more aggressive training, but decided to switch them over to the Bloom Regiment! They're kicking ass! ▶️Saturday 03.20.21 / Fed with about 30 ounces of Bloom / FOOP ▶️Sunday 03.21.21 / Fed with about 30 ounces of Bloom / FOOP 🔹🔹VIPARSPECTRA XS1000 LED🔹🔹 Amazon US: XS1000 10% off: in10MrJones http://yx-8.cn/0y-6 XS1500 5% off: in15MrJones http://yx-8.cn/0yA XS2000 5% off: in20MrJones http://yx-8.cn/0y2Y XS4000 5% off: in40MrJones http://yx-8.cn/0y5k Amazon Canada XS1000 10% off it10MrJones https://amzn.to/38udUVe XS1500 5% off: it15MrJones https://amzn.to/3esVUyr XS2000 5% off: it20MrJones https://amzn.to/3l5zAfg XS4000 5% off: it40MrJones https://amzn.to/3l7k5Uj

Started off by setting up the growing environment and dialling everything in such as; RO Water for the RDWC hydroponic system. Water Heater being set at 20 degrees C. Water chiller being set at 21 degrees C. pH being set at 5.7/5.8 Room Temp and humidity 20/23 Degrees C / 60%/80%RH. Instead of using rockwool cubes to place my seeds, I put them directly into the clay pebbles. I then used a DIY humidity dome to place over the seeds until they make an appearance. I have been top feeding RO water every 6 hours. Foil was used to cover the net pot to ensure no light leaks were going into the system. Highly important in DWC. Will add some light nutrients once seeds are more established. Until the next one!

For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

6’-4” & 5’-8” as of today, 6’-0” average height. These ladies are beautiful! Everyone who comes by the house just stops and stares when they get near my garden. So do I 👍🤣 I had to move some plants outdoors from my indoor grow due to losing the battle to high heat and humidity. Two are super close to harvest, one might get cut over the weekend. Feel free to comment and let me know what you would do. Thanks!