Likes
4
Share
Boy last two weeks were hell for this girl she actually looks a lot better this week .Had a bad ph issue was running 6 at top and getting 7 at bottom but didn't realize I was using wrong nutrient line and it screwed me up good .. got it set right now but she is still not happy to her best ability yet two weeks ago great now ok .. learning as always and trying to be better everyday .
Likes
24
Share
Day one of week five! 19th September! Small amount of defoliation today as some leaves had been laying on the soil and were turning yellow. Other than that the girls look good I think. A little more LST but think Ive got a good even spread so far.. 🤞🏼 Nutes gone in today Biobizz: Grow/Bloom/TopMax all at 1ml per litre.. Day 3 of week 5! Update 21st September: Nutes gone in again today BioBizz Grow/bloom/Top Max all at 1ml per litre... Starting to see signs of filtered water deficiencies so CalMag going in on next feed @ 1ml/l. Wasn’t sure if my water filter was much cop but looks like it’s better than I thought. Wish I’d gone with my gut and started the CalMag earlier! Other than that I’m giving them a couple more weeks of veg and then we’re going to flower 🌷 all being well 🤞🏼❤️ Day 4 UPDATE: 22nd Sept. More LST to keep things all the same height and encourage more new growth sites.. Day 5 UPDATE - 23rd Sept: Last lot of Nutes for the week - BioBizz Grow/Bloom/Top Max @ 1ml/l and now that CalMag has gone in @ 1ml/l I’m hoping to not see anymore brown spots on my leaves 🤞🏼🍁 Happy growing everyone!! 🍃 🍁
Likes
51
Share
@Waveform
Follow
Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …
Likes
2
Share
She been cleaned and looking good so far time to start pumping those nuggies
Likes
20
Share
Starting to see pistils and definitely stretching. Everything seems to be going smooth. I'm defoliating slowly, just a couple fan leaves a day. I have a mini dehumidifier coming tomorrow to handle my humidity issues. I recommend anyone using Maxibloom as a nute to buy a magnetic stirrer to fully dissolve it.
Likes
Comments
Share
@Cultiv8or
Follow
It was fun to grow in the back yard. I wouldn’t grow again though. They get stressed and stunted very easily. Don’t smell. Low yield. Low potency.
Likes
2
Share
Rainbow melon has stolen my heart From day one the plant was bigger as nice strong stock handles low stress training well some of the biggest buds I’ve ever had. I am truly in love with this plant fade is absolutely one of the Most beautiful like an Indian summer Cannot wait to see what they come up with next💪🔥💯
Likes
61
Share
Hi Guys:) Today is the update of the Blue Gelato # 41 🌱. She looks very healthy 👌. It has grown very nicely this week. The buds start to develop and the sweet smell gets stronger every day 😍 I love this phenotype, it smells just like the last grow when it was in organic soil 🤗 I wish you all a good start into the new week, let it grow and stay healthy 🤗 🙏 🏻 🌱 🍀
Likes
10
Share
Processing
Likes
25
Share
@Stick
Follow
Preflowers everywhere 😎 She went through a serious defoliation without any issue. She drinks a lot. Hopefully the stretch should be almost done, available height is limited and I don't want to dim the QuantumBoard, it is now at full strength, 320W so 110W per board. This OG looks promising!
Likes
60
Share
Plant is growing fast now. The hot days are back, but we are still going strong.
Likes
10
Share
@Naujas
Follow
this week I saw the beginning of flowering:) the girl is growing very slowly, but definitely with beautiful, strong branches, I think there will be wonderful flowers:) which I will have to wait to see :) basically everything looks good:) I think in about 2 weeks I will give her more space, because the Mimosa growing nearby will already be ready for harvest :) so the whole growing box will be left only for this lady:) good luck to everyone:).
Likes
13
Share
Some of you may have wondered: Why do I use CO2 at average 950 ppfd μmol/m2/s (moral flow)? The answer is quite simple. Because of lack of space in some regions of my cultivation area, I simply cannot keep the ideal distance to my Sanlight high-performance lamp, due to some height growth of various strains. And so some of the main colas have ppfd values of 1250 μmol/m2/s and even more... So this is how I manage to achieve and compensate for such high radiation levels even with a CO 2 balance. And I have to say, my strategy to avoid various light stress symptoms works just fabulously. In combination with CO 2 implementation, my babies are simply unbeatably insensitive to light. Thats it! Beginning of 3rd week flowering: Again feeding my babies by 36 hours fermented potions of Bio Tabs Kompost Tea PK-Booster (15 g pro Liter) and added: 5ml Orgatrex/Liter 1 Spoon of Bactrex 1 Spoon of Mycotrex 1 Spoon of Mycco-Vital 1 Spoon of Dynomyco A little tip for those who are interested in small modifications that have a big difference or influence - on the result - effect - beauty - health - taste! Before adding microorganisms or beneficial bacteria or Mycorrizae and Trichodermas, please use oxygen-saturated water. On the one hand, unwanted chlorine gases evaporate and the small world of the microbiome becomes even faster and more rewarding in compost tea to sprout. Last but not least for this week, I would like to introduce my reasons, why I prefer growing biologically and sustainably. First of all, it’s something which suits very well in these times/days we are living now. Sustainability is a big need and task for our planet. 🌎 Nature means life. Our home, the air we breathe and everything that surrounds us. Not just today. Hopefully tomorrow as well. Maybe I'm starting to protect our environment on a small scale, but maybe I can also make a big difference at all. If you change the way you look at things, the things you look at change... I thought about what’s the difference, between Mineral Feeding and Super Soil Feeding. It’s very easy. Biologically Growing is a similar process than the natural soil activities out there in the lap of nature’s. So plants has to work and interact with the microorganisms and microbiomic communities in the soil. So the plants will never get lazy like the lazy ones of mineral feeding growers. If you grow biologically, you will feed the soil first and the microorganisms will support every parameter next to your plant conditions. And that will generate an unbelievable spectrum of Terpenes and Trichomes you will never forget. It’s the same comparison, when you daily visit McDonalds and you eat only fast food. How does your body and mind react on this shit for money?!?! May I invite you to think about it… See you next week dear Growmies! Have a nice Weekend and take care… Peace out! Addendum for Day 53: At the moment we unfortunately have another winter onset here in Germany. This means that I am forced to take additional heating measures due to structural facts in order to be able to keep the temperatures constant. After all, just tonight the thermometer climbs again to -1 degree Celsius. In addition, my exhaust air system runs out of my bedroom terrace and I therefore grow winter and summer with the patio door open. Well, sometimes I experience real weather-related challenges. But all in all, no problem... "Where there's a will, there's a way." Addendum to pouring out the fermented PK tea: I always administer half a liter of lukewarm aerated water with 3.5 ml of cannazyme per liter to each plant. This means that the "root machine" is not supplied with supplies unprepared and the nutrient solution can thus also be better distributed in the soil. Since I also work with cloth shoes, I spray them evenly moistened everywhere with water that is also warm before pouring them out from the outside. This has the advantage that the moisture stays where it should: in the pot! ... I did the math today ;-) We are still in week 7 until this Friday. And week 8 starts on Friday! OMG... still so much time yeahh! Today my Fast Buds Sour Jealousy and Sweet Seeds Big Devil and Dark Devil Automatics arrived. I'm looking forward to it. This time Fast Buds next Time Sweet Seeds. Love them too. Very beautiful genetics. Today a review video of the beginning of week 3. At the time of the pictures, I had minor signs of nitrogen excess. (Light peaks first at the crown of the roof and then slightly continuing to the middle section.) I then painstakingly racked my brains as to why this could be. I found that very slight dry spots had formed and therefore the root found small accumulations of nitrogen that caused its problems. But then, when I carefully homogeneously checked the moisture content in the substrate, the problem evaporated again. However, they had not shown any loss of growth rate during this time. Nevertheless, they developed as expected. They Strawnanas had no problem with that. In the end, I always have a hard time killing them. But I guess that's the way things go. We live and die. We come and go. But it's not there yet. ;-) Tomorrow is day 56. Tomorrow’s updating day! Can't wait to see their progress. Have a good time and see you tomorrow… 🏽🕊️ 🏽 ☮️🕊️
Likes
8
Share
Was another good week this week. Seem to have figured out the brown spotting, started adding sensi-calmag to the mix and the spotting has stopped and leaf color is darkening back up. Not sure if was from calmag deficiency or low nitrogen, but either way they look better so it seems like it was the right call. Did a light defoliation early in the week, maybe a dozen leaves per plant. Just the usual stuff under canopy or bunching too much. Has been much easier to keep humidity down since the heavy defoliation a week ago. Buds are really starting to look good on three of the four plants with the front left being furthest along. She is starting to pack frost already! Back left still looks a week behind, but coming in strong. Could this be a come from behind winner? Last day of the week took apart the Autopot system for a good clean. Clean the res, flush the lines with line cleaner, pull and clean the valves with dish soap, cleaned out the trays, wipe down the underside of the pots and back together it all goes. Been running for 40 days and this is the first clean, should be the only one as there's only maybe 40 days left. I find the B52 builds up a bit of sludge after a month or so, but worth using have seen noticable better grows since adding it to the feedings. Either way, an hour of work once a grow is nothing to complain about VS all the time out in hand watering. Also a big improvement on the newer 5.0 valves vs the previous generation. They are about double the diameter, so they gunk up MUCH less and fill a lot faster. Using the old valves I was cleaning every 1-2 weeks depending on feeding frequency. Lights 18" @90% pushing 700umol/s Watering 32L every 3 days Air domes running 100% of time 4" intake @70% 6" exhaust @50% 6" Oscillating fan @50%
Likes
2
Share
Vegetative steering Aiming for: leaf Temp -70f CO2 300 VPD +.93 Planning for: MJ and bras foilar 60%+1.5/-71f set to 68f+1.5 Leaf Temp is about 3f higher than ambient temp At 68f outside, grow room still wont hit 68 with lights off Day 24 No Co2 50-55klux 15inch from light Leaf Temp 71-73f 60%/72F Veg steering Coconut water Uneven canopy(11 at 29inch, 3ag 31 inch ———————— Day 26 56%68f(humidity dropped because i havnt watered in two days 🤡) 23inch-34inch tal. Arranged in order. 52-59klux Sprayed 5Bras,(23inch)70 leaf temp 4Jas,(29inch) 70 leaf temp 4Bras&Jas(34inch)72f leaf temp ——————— Day 27 Watered once ————- Day 28 Im pretty sure the sprays worked. Noticed leaf burn with 3 plants sprayed with MJat 147ppm(.5ml) No leaf burn with the .1Bras sprays I wonder how long both are good for. Also, can i pour the unused spray in the medium? I just dont want to waste it. Plants are noticeably more vigorous. I am wondering if now is a good time for my defoliation. i was planning for Week 5. I feel like the buds are to developed for me to be pruning off lower buds and makes me feel like i should have pruned beginning of week4 __________
Likes
3
Share
@MrPipi
Follow
Yeah Lance is definetly recovering. Fascinating how this stunned him, and he and Frank are now so far apart, but same strain, same soil, same everything. Mr. Pipi will see how Lance turns out. I´m still hoping for good and quick recovery. First Pistils showed up on all the plants on Day 23. So in the next one or two Weeks Mr. Pipi expects the Flower to start. Endspurt Sportsfreunde. So as we can see in the Video Pedro is the tallest, and his overall structure is Mr. Pipis favorite, for now. Not so bushy as the Bloody Skunks but we´ll have to see what the Stretch says. The opportunity was given to tie Pedro´s main stem down. So Mr. Pipis canope stays around the same level. Initally I wanted to not manipulate them, but that´s what Mr. Pipi loves in growing. You watch´em and if you bond enough with your plants, you´ll know what to do. be in a symbiosis. But dont use Pipi on your plants.