The Grow Awards 2026 🏆
Likes
Comments
Share
@RatmanJR
Follow
July 12, 28 days since flip Clones: So far all 3 remaining clones are growing well. Buds are really starting to form and getting a ton of pistals forming. Plants grew a little bit in the last week. Ended up doing another aggressive round of super cropping to keep them from burning up. Some of the colas are above the light so may add supplemental lighting but honestly so many bud sites I’m not concerned about getting a large enough sample. Began to notice some lower leaves dying and some spots on some upper leaves so top dressed both earth boxes with some craft blend, cow cal 24, big 6, some potassium and some epsom salts. Should make her nice and happy again. At this point going to flower for a few months and drop individual updates as the plants stand out Mothers and father: Didn’t end up topping like I said I was going to last week so going to top this week. Just trying to stunt them a bit so they don’t get too large. No major updates other than this God bless!
Likes
5
Share
Eccoci qui!!! Tutto procede per il meglio, i pistilli sono usciti e ora si va dritti dritti alla maturazione, NE VEDREMO DELLE BELLE!!! La piccola cresce molto vigorosa ed in salute, chissà cosa ne verrà fuori intanto possiamo solo ammirare questa bellezza!! Grazie a tutti per il supporto ❤️🔥🌲
Likes
4
Share
Gave her some preflower food and more mycorrhizae. She's stretching like crazy 🤣 I'm loving the smell all ready. Smelling lemon and fruits. Gave her some low stress training and at the end of the week.
Likes
17
Share
@BLAZED
Follow
W15 (8-5 to 14-5) 8-5 Temperature: 26.5 degrees (lights on) 20.1 degrees (lights off) Humidity: 58% (highest) 45% (lowest) Opened the reservoir for a couple of minutes. Set the light to 80% strength. 9-5 Temperature: 28 degrees (lights on) 21 degrees (lights off) Humidity: 61% (highest) 42% (lowest) No pictures. 10-5 Temperature: 28.6 degrees (lights on) 21.4 degrees (lights off) Humidity: 60% (highest) 40% (lowest) Added 10L to the reservoir. Dry weight: Chemdog #1: 3.6 kg. Chemdog #2: 4.1 kg. 11-5 Temperature: 29.8 degrees (lights on) 20.7 degrees (lights off) Humidity: 59% (highest) 31% (lowest) No pictures. Opened the reservoir for a couple of minutes. 12-5 Temperature: 30.1 degrees (lights on) 21.2 degrees (lights off) Humidity: 51% (highest) 36% (lowest) Opened the reservoir for a couple of minutes. 13-5 Temperature: 31 degrees (lights on) 21.8 degrees (lights off) Humidity: 53% (highest) 40% (lowest) No pictures. Opened the reservoir for a couple of minutes. 14-5 Temperature: 28.7 degrees (lights on) 20.6 degrees (lights off) Humidity: 60% (highest) 39% (lowest) Dry weight: Chemdog #1: 4 kg. Chemdog #2: 5.6 kg. Added 8L to the reservoir. Opened the reservoir for a couple of minutes.
Likes
9
Share
IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
32
Share
@Freddd
Follow
OK lots of excitement this week. I could stand by and watch no longer something had to be done, but what? Let's turn to the strange leaf problem first. Copper necrotic spots. WTF could this be, it's nothing to do with nutrients or pH that I'm pretty confident. Maybe it's just normal leaf dying. Whatever. I've supplied some photos where you can see a pattern of concentric rings. This tends to make it look more like some sort of mosaic virus, however if that were the case it would be everywhere. It looks like something was spilled on the plant but that did not happen. I don't deem this a problem at all but it's very very puzzling. Anyway after mulling the situation it seemed like it was about time this giant leaves were gone. So all the giagantic huge chunky leaves were removed. I figured whatever they are making there's plenty more healthy leaves to carry on the work. Plus I think it induces some shock to the plant. It will definitely shift hormones around but what effect that has I don't know. It looks like I've done a lot of work on this plant but I haven't really, just trying to see what she wants to do. So all that's happened is the first two branches that come out with the first baby leaves have been removed all other branches have developed normally. Then the four branches from the first two growing nodes have been pinned down to give the plant a bit of space. Edit: I've just pinned the lowest branches back a bit more and removed any fan leaves around the top as there seems to be plenty around.
Likes
168
Share
📆 Week 2, 13-19 May 2024 13-19 May - Observed and watched the seedling grow. 📑 Plant is strong and healthy. I see no problems in early development or the speed of growth. 🍶 13 May initial nutrient solution not changed, 1st change is week 3 🍽️ 13 May initial feeding schedule unchanged 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient solution EC 1.0 at 72 degrees F 🔆 Light power at 50%, DLI 12-15 canopy coverage at 18hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this week. Thanks for the look, read and stopping by.
Likes
Comments
Share
Que pasa familia, vamos con la cuarta semana de crecimiento de estas Drizl Pickl feminizadas de Seedstockers. Vamos al lío ,se trasplantaron en macetas de 7 litros definitivamente. El ph se controla en 6.0 , la temperatura la tenemos entre 24/20 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 16h de luz, el foco está al 50% de potencia. De momento van creciendo a buen ritmo y tienen un buen color, estaban muy bien enraizadas al realizarle el trasplante se notaba la abundancia radicular. Agradecer Agrobeta por el envío del kit gold series para esta temporada, son unos jefes 🙏 - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨
Likes
4
Share
@Growtopus
Follow
So, wir haben auf Blüte umgestellt, auch wenn ich vielleicht noch etwas hätte warten sollen. Es hat aber einfach vom Zeitpunkt her gepasst – mit der Entlaubung und dem Abstand zur vorherigen Pflanzgeflüster-Behandlung. Die Triebe wurden etwas von Blättern und Seitentrieben befreit und mit Clips angepasst, damit wir schön in die Breite gehen. Mit Drähten möchte ich das dann im Verlauf der Blüte noch etwas nachjustieren. Wir haben diesmal trotz fertigem Living-Soil-Mix ordentlich Booster und etwas flüssigen Dünger gegeben, damit sich die Pflanzen und das Bodenleben von der Neemöl-Extrakt-Behandlung erholen. Morgen gibt es noch etwas Soil Starter, damit sich die ganzen Bodenpilze neu ansiedeln können. Beim nächsten Gießen kommt dann noch Honig dazu, damit die Mikroorganismen genug Energie haben, um sich schnell auszubreiten und die Pflanze zu unterstützen. --------- So, we’ve switched to flowering, even though I probably should have waited a bit longer. But the timing just worked out well – with the defoliation and the gap since the last “Pflanzgeflüster” treatment. The shoots were slightly thinned of leaves and side branches and adjusted with clips, so we can spread them out nicely. Later on during flowering, I’ll fine-tune things further with some wires. This time, despite the ready-made Living Soil mix, we added a good amount of boosters and some liquid fertilizer to help the plants and soil life recover from the neem oil extract treatment. Tomorrow they’ll also get some Soil Starter so that the soil fungi can reestablish themselves. With the next watering, I’ll add some honey to give the microorganisms enough energy to spread quickly and support the plant.
Likes
8
Share
Wk4, Day22, 4/27/22 Wk4, Day23, 4/28/22, continued defoliation and tied down tops, each plant has at least 6 tops Wk4, Day27, 5/2/22, no issues requiring adjustments Wk4, Day28, 5/3/22, heavy tie downs and defoliation to finish Wk4
Processing
Likes
5
Share
@EKWCR
Follow
After 1 week of flush the plant start to fade gently, i hope that gonna be good before harvest. I think my additives tend to keep my plant green, both contain seaweed extract and are slow release. There is a little bit of nice fox tailing.
Likes
9
Share
@Shefman93
Follow
Going to flip in a couple days
Likes
19
Share
Let’s Go Day day 61 from seed !!! This week went real well! As you can see all these girls are starting to stack very well! Everything is pretty much the same, we have switched to fully bloom an these ladies are just Looking super healthy , we are getting a nice smell of grapes on these Ogreberrys ! Bruce Banner is packing crystals like a Mofo too an super stanky , all very happy about this run ! Still got a nice few more weeks of bloom to go let’s watch em stack ! Lets grow lil ladies let’s grow !! Hope you all enjoy an have an amazing productive day ! Peace love an positive vibes to all you Growmies out there Cheers 😶‍🌫️💨💨💨💨💨🤙🏻 If there’s any questions please just ask I’ll be glad to help !!
Likes
25
Share
@m0use
Follow
This little Blackberry grow is to finish up the seeds I had in the fridge for a few years now. Had 2 packs of 5 "buy one get one" and had 3 left over from the 2nd pack. Did not know what to expect but they all seem healthy and stable. The packaging is old school before they went all black. Will upload this into the fastbuds outdoor contest and see how it does. Germinated by scarification of the seed with an emery board then soaking in water for 12hrs, I added in the step of paper towel for another 12hrs then planted outside with myco in the hole. Watered in with some LABS "Lactic Acid Bacteria Serum [Lactobacillus]" and Transplanter MS-CS RootRescue. They all popped up within a few days after planting outside. Going to try and do this diary with only Liquid Feed by Trip Tonic, this is an in-house brand I picked up from my local grow shop. Have talked with other users on this site who are also in Toronto and they speak highly of this shop and like their products. The medium is fortified with some compost and its a organic pro-mix designed for veggies so it should have enough food in it for the first 3 to 4 weeks and will not need to use the liquid feed just yet.
Likes
7
Share
@Hempcules
Follow
WEEK 6 (Day 36-42) My Runtz have now nicely adjusted to the flowering phase. The stretch is beginning, and the plants are slowly gaining height. However, I’m trying to keep them as small as possible since my space is somewhat limited at the moment. The two plants are in a dimly lit corner of my tent but currently receive 24-hour light because I still have other plants inside. I’ve already fertilized them a bit with everything. They’re still thriving beautifully.
Likes
42
Share
Day23 today I increased the power of the light at 600w 🤩 I took the seek gorilla melon out finally haven’t recover 😢 Day 24 I topped the Two gorilla melon and two of the papaya sherbet 🍀✌️ Day27 all good 👌 All guava auto’s enter in flowering stage first pistil are showing 😎