The Grow Awards 2026 🏆
Likes
Comments
Share
@DevelGrow
Follow
Hallo Freunde! 👋 Es wurde geerntet und es sind Feste harte kompakte buds dabei heraus gekommen! Ein starker Duft der nicht zu beschreiben ist aber Original nach Mac 1 duftet aus dem Coffee Shop! Mal schauen wenn's trocken ist was übrig bleibt und ob es auch so schmecken wird! ✌️ Keep Green and grow High ✌️🍀💚🍀
Likes
10
Share
Day 33-13/01/22 they look really well I’m just trying to make space in my other tent so I can move half of them out and be more organised but I think this is the last week of veg!!!
Likes
12
Share
Making the ties and defoliating to the light enter in the center of the plant.
Likes
8
Share
This was a easy strain to grow and was never picky with my Amateur ways... She had a very strong smell that was Dominant over my huge Purple ghost candy.. I use my own soil now that has been worked over by my Worm Farming.. I also use worm castings every week spread on all of my plants.. Also every couple of Weeks I make a homebrew Tea for all of my plants with Alfalfa, Molasses, Worm castings, Seeweed with the Salt washed off..
Likes
10
Share
Likes
31
Share
Was a pretty smooth week for most the girls. Showing some steady growth. I topped all of the plants around day 12 other than the slurricane 7. Ph got a little high since the nutrient level was too low to buffer it at the beginning of the week. Slurricane 7 and sugar cane are the ones that took some damage. I think they will be ok though. I upped the nutrients to 1/4 tsp per gallon and the ph has held stable since then. Should be able to start some training the middle of next week and looks like we might be going 2 more weeks on veg before flipping them to flower depending on how this upcoming week goes. Guess you will have to show up next week to find out...
Likes
3
Share
@Oldwied
Follow
The second week is over every thing looks fine. Cream Caramel is a nice bush. Training is not necessary only a little LST on two branches to put them in a better place. Light Power: 80% Day 60 Flower day 13 Photoshooting Defoliation
Likes
17
Share
Howdy growfessors 👽, chopped down two LSD, what a great strain! One of these two ladies performed way better than the other and I'm excited to see just how much more weight and bud she packed on. Thanks for stopping by growfessors 👽🌳💚 July 11 update, one LSD plant 92 grams, the second plant 95 grams, 187 total. Plants have a great fruity, berry taste and great heady high.
Likes
129
Share
@DreamIT
Follow
🎲➕ VLC Critical Plus + by PEV Grow➕🎲 ➕13.6 Speak for itself. is almost ready to start mainlining 😆 ➕14.6 Nothing interesting at the moment, it grows well ➕15.6 even today nothing special to say, yeah ➕16.6 All very nice. It will look so soft in the picture ➕17.6 Yesterday I discovered 3D photographs. What do you think about it? if you are not just a serial commentator, please leave me your opinion, i would appreciate it very much 🙏🦄 ➕18.6 with these photos I caught a little cursed insect that goes around the leaves, as a precaution I give two sprays of neem oil in the box. I live behind closed doors with mosquito nets and bug catching cat, I really want to know where they came from. In one year of Indoor cultivation I have never had any problems 😤 ➕19.6 Week ended without problems, very fast this plant. Great job PEV Grow 🤘🦄 __________________________________________ ❓ Are you new to the world of cultivation and don't know where to safely buy your seeds? 😮On the Pevgrow site, you can find the best-feminized seeds indoors and outdoors. Achieved through totally natural stress methods and with guaranteed superior quality. ✅http://bit.ly/PevGrow ℹ️Check out the marijuana dictionary ✅http://bit.ly/CannabisDictionaryPEVGrow __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "ViparDreamIT" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon US: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE 👀 Watch my ViparSpectra XS1000 unboxing on YouTube, leave a like and write to the channel 🦄 ✅http://bit.ly/UnboxingViparSpectraDreamIT ______________________________________________ 📷🥇 Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and enjoy the growth 💚🦄🤟
Likes
10
Share
@cherokee
Follow
Всем привет 🖖 Плохой интернет, постоянно отсутствует свет, дневник вести и обновлять его стает тяжело. Продолжаем. Бортовой журнал Purple Punch Запись номер 5 В дневнике с сортом Mimosa Cake я писал о проблеме с обычными пластиковыми горшками. 2 куста Purple Punch ростут в горшках Hercules pot они выглядят намного лучше и больше чем куст который растёт в обычном пластиковом горшке 11 литров. Как и Mimosa Cake растение в обычном горшке имеет признаки перелива, горшок очень тяжёлый и не просыхает. Вчера я поливал только горшки Hercules, они пьют больше и растут быстрее. Меня не устраивают размеры растений, слишком низкие как для 5 недель, но все же света им мало, на этой неделе они получают 13 часов освещения. Я продолжаю тренировки LST и растягиваю куст по всему периметру горшка. Делаю дефолиацию удаляя большие листья, и старые поврежденые. Уже 5 неделя но растения не начинают цвест, надеюсь они подрастут ещё на сантиметров 30 и дадут мне большой фиолетовый урожай.
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
3
Share
@Kelly420
Follow
I'm on day 5 of flush with AN flawless finish. Maybe give one more week or so to chop. I can't find my microscope so , eh I'll just use my best judgement here. She's frosty af
Likes
17
Share
@foxbberg
Follow
Day 22: Drain EC 3 feet high and risin'😅( average 3.3 to be exact...) dunno how much whatever-salt is building up in that pots, but it obviuosly doesn't bother the ladies. Dark green colour, very few 'claws', no signs of tipp-burn, new foliage appears in a juicy green and turns dark in an instant, leafs point upwards....... looks like they're happy😊. Planns for this week: - Install the scrog-net - Obsereve plants/soil ( when do i have to feed nutrients again?) otherwise there will be no changes...... Thoughts: These bushy babies will be kind of a challlenge to create this scrog the way i'm used to (basically bending the 4 main main colas to the corners of the tent, upper branches to the walls and spaces between the pants, lower branches to the very center). Now these ladies make so many branches, so close togehter and so equal in length, underneath huge fanleafs..... i'd love to have them in a 100 square meter canna-crib....but in a tent...????? I really hate doin' things without having them planned - but in this case i guess i will have to install the net, start weaving and see what's happening😯 Day 23 Let's keep it positive...... indoor-climate of 64% rh is perfect for my health💪😁!!! ......but in my tent it's killing the vpd😖. at a lousy 24 degrees C, i'm readin' about 60-64 % rh wich results in about 0.7 to 0.8 kPa.* More figures? Here come the crazyones👻!: pH 5.5; EC 4.2😨 but thats only drain from plant 3....... average was 6.1/3.6 The girls busy produce roots, shoots and leafs....... still very green, still not unhealthy.......few claws, no tipp-burn. Basically a comfortable place to be: It's not bad yet - no work but watering - and it can only get better!!!😁 *VPD issue solved: The sensor hung too close to a fanleaf - didn‘t expect this thing beeing so sensitive 😅. Day 24 Climbed new hights this morning: Plant 1 had an EC of 3.8 - the others didn't climb any higher than yesterday. So maybe we've reached the climax..... 😇 Visible growth now - so i installed the scrog-net and will start bending and weaving these days:-) Thoughts: Did beeing out of VPD-range for one day harm my plants? How exact can my sensor measure VPD? after a bit of research i found out: Whatever you buy for less than 200 bucks is far from beeing exact! Even professional sensors have a margin of about +/- 1% in relative humidity. Thermometers at least +/- 0.5 degrees C. This could give some a good guess of the actual VPD BUT: Leaf-temperature-offset is absolute key! Many of our trusted homegrow-equippment isn't even able to measure it (some offer default temp-offset) ....don't wanna go further here - but there's no way to achieve something like a precise VPD-measurement in homegrowing. So why caring for VPD? Even with those less accurate instruments, you may be able to keep your plants in something like a comfort-zone. Way better than only guessing 👆!!! In case i ran a much higher VPD than planned, yesterday (due to a missplaced sensor) , it will not harm or kill my plants. they might have had a bit of stress from dry air - but nothing to worry about! Day 24: Decreasing salt-levels in the drain - excepting plant 4, wich had an EC of 4.0 - so i guess i'm slowly draining exess-salts from top to bottom and might have collected some build-up. The girls seem to be quite okay. Root-growth is vigorous (there are thick, white roots penetrating through the pots, everywhere), the stems are relatively thin. removed the LST-lines. the Sc.r.o.g: only materiels needed, were a climbing-net for gardening (HDPE) cut to 90x90 for my 1x1 tent, 4 cable-ties and 2 meters of strong rubber-cord. Pre-installed the net with the cable-ties, then weaved the cord around the outter cords of the net, led it aroud the posts and pulled tight. Then brought the net into it's final position. Not as sturdy as with a wooden frame - but i had less than half the work and a bit of freedom to move things if necessary. Any shoot will now be put to the next outter square (relative to the center of each plant) as soon as can be held by the net, without harming the top. Once i moved all of the dominant colas to the next square, i'll have to take 10-15cm steps (vertical growth), to reach the next square. As soon as i have about 70 of my 81 squares filled, i'm going to flip to 12/12. Since i'm plannin' to have them full of sugar when flippin', i don't expect too much of a stretch. This way i hopefully have the longest and strongest shoots framing the shorter ones in the center - so the canopy shapes like a bowl, in order to achieve the most even light distribution possible. Day 25: The main colas visibly reached out for the light - but yet i only moved 1 single shoot to the next square. Girls look good, EC is dropping slowly, climate fine. CU tomorrow👋 day 26: on Track... nothing to worry about...... till day 28....... Due to high EC levels in the soil, i couldn't do much more than pour out some water and prepare the scrog this week. Next week i will have to do some weaving. If the nutrientlevels allow, i'll do some defoliation.
Likes
56
Share
@Aedaone
Follow
The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Coop Poop, Feather Meal, and Soluble Kelp are ml/gallon of soil top dressed. Everything else listed in nutrients is ml/gallon of water fed to plants without checking the solution Ph. Day 1 we had a high temperature of 79°F. We missed the rain, but had a big dew and it was 90+ humidity. I watered about 5 gallons each. Day 2 we had a high temperature of 78°F. It was mostly cloudy and super humid, but again no rain. I watered about 5 gallons each. I fed coop poop at 75ml top dressed and Soluble Kelp 50ml top dressed. Day 3 we had a high temperature of 89° with clear sunny skies. Humidity is still up. I watered about 5 gallons each pot. Day 4 we had a high temperature of 88°F with mostly sunny skies. I watered about 5 gallons. Day 5 we had a high temperature of 91. Skies were clear during the day. I watered about 5 gallons of well water Day 6 we had a high temperature of 91°F with mostly sunny skies. I added 160ml of molasses to top of pot and washed it in with my watering wand. I watered about 5 gallons. Run off isn't an issue. The girls are rooted through the pots into the ground and the loved the K in the molasses. Day 7 we had a high temperature of 87°F. We had over cast skies, some gusty wind, and rain. Luckily the thunderstorms missed is. We did get enough wind to blow one of landrace crossed over the wch3- which requires some attention. The rain did the watering for me. This week was a success. Buds are filling out she's super loud and frosty. She's really trying to finish.
Likes
4
Share
@QixxGrows
Follow
Day36, 37, 38: Seems to be growing a set of leaves per day now. Super growth! Stretching to the top. Day39: I had a hiccup with the camera. For some reason it stopped responding at 04:30 in the morning. I only realized it much later. I still don't really know why, but reseating the data ribbon fixed the issue. Day40: After fixing the camera, I decided to take this view again. The Lady is starting to show some nice growth and this view will show it best. If you look carefully, you'll see that her branches are not green, but rather reddish. Definitely related to genetics :) Everything else is within limits. Plus, the leaves look super healthy. Day41: Here you can see the stem colour better.
Likes
6
Share
Plants have stopped stretching and started to focus on flower development with pistils reaching Decent resin production so far in this tent, getting loud with the gassy fruity in your face cat piss smoothie
Processing
Likes
7
Share
Week 2 of flower and the pistils are starting to shoot out. I've been watering pretty consistent every other day, F drinks a lot and gets thirsty the quickest. Clones are pretty big and the light is dimmed down a bit, I'll transplant them up to I think 3 gallon pots soon Lollipped a good 6 inches off the bottom of the plants over the 2 cuttings and they look good and healthy, in the next coue weeks they will start getting into their full development.
Likes
10
Share
@Weedbadk
Follow
Día :1 iniciamos este seguimiento de estas variedades toda germinaron en 3 días Día 5 desde puesta en sustrato Solo pulverizó 1 no sobrevivió pero las 2 salieron sin problemas
Likes
2
Share
2 x black apple hitchcock 1 x black hell 1 x choccolatto To be put into a dwc 4 pot homemade 60+ltr each pot. Also. 3 x kukulukan 1 x Indian kush To be vegging while the others bloom ready for next run. After 8+ weeks of veg