2/13: Stem still seems stretched from the shell being stuck on the leaves. 2/16: Decent heat stress observed an afternoon. Temperature was 80° and the light has been at 100%. Move the light to 26 in and open more events in the tent and window in the room to let in cold air overnight. Time to temperature got down to 62°. 2/18: Heat stress is improving. Keeping her well watered.

D54 - She is growing just fine. However it is a bit slower than my previous growth, and I think that this strain might grow a bit slower. I keep plucking one pair of stems and leaving the next one. I also LST new growing stems. Beast - Cats are rally attracted to this plant and mine is always asking for it.

Well today is week five day 44 of flower this girl is fattening up very nicely some nice big colas coming not so much as a cheese smell to her got that musky sweet gorilla glue smell about her

30-06-2020 defoliation preparation for flowering . Today i defoliate and clean them up good. looking for just toops. Any tips or comments are aprecviated and i will respond asap. Stay safe , Peace out D

Week 7 Day 42 our VPD is getting higher day to day, we in the 1.2 - 1.4 range hard week of defoliation this past week and its not over Day49 we had good development but we still fighting environmental conditions all over the place We need environment concistency and we're not getting it 💚

Hey! Welcome to week four for Misty, a mystery auto from FastBuds. I update daily so go check last week which is now complete. :) Day 22: I have reconfigured the tent - see video for new config. Misty has more light now. Fertigated 2l. Day 23: I have heavily pruned the companion plants and performed some LST and defoliation (where big fan leaves block nodes, or are in the way). Pretty radical looking changes, brutal perhaps. I did it to Nesia last week and she responded very well. So let's see how Misty handles it. I have been doing increasingly tough LST since Day 7 in preparation for this brutality so she should bounce back. Day 24: See? :) Day 25: Misty had breakdrought at 0900. Fertigated approx 4l. Day 26: Trying to wait a week before further training. Day 27: Did a little gentle LST and took off 2 leaves. Didn't manage to wait a week only 4 days. Day 28: Fertigated 5l.

So instead of chopping and losing anywhere from 4-8 ounces, I decided to just let them do their thing outside. I know it’s controversial to have a male outside and even more controversial to have a hermed female outside, but fuck it. I haven’t seen huge pollen deposits on leaves, and only a few open sacs, close to dropping. I pick em off if I see them. I am using small doseds of Lost Coast Plant Therapy for my IPM. It’s an all natural, “minimal risk” pesticide made using soap, soybean oil, peppermint oil, 70% iso alcohol, Sodium Citrate, Citric Acid, and water. Smells super good, does leave a slight film on the leaves because of the soap but does easily come off. I’m planning on doing 2 rounds of budwashing. Budwashing consists of: 5% hydrogen peroxide lemon juice Baking soda Water 3 five gal buckets. Fill one bucket with water and the ingredients, and then the last 2 with just water. Swish the plant matter in the first solution for 30-45 seconds, and rinse in the second two buckets of water, 20 for the first bucket and 30 for the second. Then take plant material and hang dry with a fan pointed directly on the hanging material for 2 days, and then resume normal drying conditions. Should leave no taste or residue behind and have no effect on terps or potency. I will update around august 4th-10th with finished bud pictures and the hanging plants. ALSO PICTURED: my 4 plant Webber grill turned grow container. Will show them off more once they start getting decent buds on them. Shown are: 2 Black Cherry Truffle X 41gs females, and in the 2 tin cans on top of grills soil is Slammer Skunk and Ego Death (both regs) from Terp_fi3nd. Will be watching those for males. Hoping they’re both female. All have been outside since like week 3 of sprouting them. The stalk picture is one of the Black Cherry Truffle X 41gs. Will post updates soon. Thanks for reading.

2 alien og are triving at the mins 1st week into flower little bud hairs stairting to form..Had to trim back tonight and thats the last gonna leave them be..Started giving big buds nuts with all there other feeds today we see how that goes ..so dar so good..

Hello everyone 😎 Week 6 of flower for the Orange Sherbet auto from Fast Buds 💥🍊 She grew fast with a beautiful green color,for the nutrient 4ml/L terra bloom & 1ml/L power buds from Plagron Spider Farmer SE-7000 80% Have a nice day 😋

Hallo und herzlich willkommen zum Ende meines Grows mit der Auto Jack, Jacky White 6th Gen. von Paradise Seeds. Die "Eltern" sind Jacky White x Ruderalis, die "Großeltern" sind Jack Herer und White Widow. Sie ist dadurch eine 75% Sativa mit zitronig-fruchtigen Aromen, genau mein Ding. Es freut mich sehr, das mir die Samen in einer sehr schönen Verpackung freundlicherweise von Paradise Seeds zur Verfügung gestellt wurden. Das war für mich der Ansporn, eine möglichst genaue Beschreibung des Growverlaufs aufzuzeichnen. Die URL des Strains findet ihr hier: https://www.paradise-seeds.com/de/product/auto-jack/ Für diesen Grow verwende ich den 15Liter WideVersion Stofftopf von ROOTiES, die Sonnenerde Bio Hanferde, den BioBizz Wurmhumus, Sonnenerdes Bio Faser, BIONOVA + zamnesias MonsterBud Mix Living Soil, zamnesias Smast Start und Plagrons Seedbooster Plus. Hat sich alles prima bewährt. Tag 106: Mondhöchststand, Ende der Erntezeit, Anfang der Pflanzzeit am Blütetag, ein Optimaler Erntetag. Die Auto Jack, Jacky White 6th Gen. von Paradise Seeds wird geerntet. Letzte Woche habe ich eine kleine Schimmelstelle bei Ihr gefunden, zum Glück wurde es nicht mehr. 160 Gramm Nassgetrimmter Buds sind es geworden. Die liegen jetzt im Keller in DryFerm Bags zum Trocknen. Nächste Woche gibt's mehr Infos. Tag 114: Das ist meine Trichomtrennmaschine. Da kommt aller Verschnitt rein mit ein paar Stängeln. Ich habe ein sehr feinmaschiges Netz gewählt, damit wirklich nur die Trichome durchpassen. Das dauert zwar viele Stunden, aber es ist ein sauberes Ergebnis. Die Maschine hab ich im www gefunden, Man kann den Bauplan für einen 3D-Drucker bekommen oder die fertig gedruckten Teile mit den wichtigsten Schrauben und Metallteilen, außer dem Motor mit Getriebe, dem USB-Spannungsregler und den Gewindestangen, die in jedem Baumarkt zu haben sind. Ja, und eben dem Netz. Da kann jeder seine bevorzugte Maschenweite dazukaufen. Die 3D-Teile haben vor ca. 1 Jahr ~80,- € gekostet, wenn ihr die Adresse braucht, schreibt das in die Kommentare bitte. Das Netz hatte ich glaub 150 Maschen(?) für 10,- €/m², der Schneckengetriebemotor (ohne Plastikteile!) mit dem USB-Spannungsregler haben ~45,- € gekostet. Die 2 Gewindestangen kosteten ~10,- €. Das Ergebnis nach einigen Stunden Sieben könnt Ihr auf den Bildern sehen. Tag 216: Ich habe vergessen die Gläser zu fotografieren, sorry. Es waren mal 3 Gläser a 750ml, ihr seht, es schmeckt mir wirklich sehr gut. Schön, dass du reingeschaut hast. Ich freue mich, dass du dabei warst 👋😎

Blueberry is nearly Blackberry 😳 This Pheno is unbelievable for me And I never had this 😍 Very dark and the smell is unique defintly

Las plantas gigantes. tuve que colgarlas de los techos, correr muebles. preparar un lugar. Todavia y a un mes y medio del corte enfrasqué el 10 porciento de todo. el año esta asegurado!

Day 99. All 3 girls down. Wet trim . Can't wait to try them out. Scissors hash was so sweet ... 1.6 kg for wet plant is not bad too I think. Plant A should be biggest in this grow from all strains ... She has to beat 202 g. of AD. Happy Growing !!!

Tag65 Blüte Nummer 1 hatt es geschafft. Die Top's wurden zum trocknen aufgehängt. Der Rest kam ins Gefrierfach zum Waschen. Denke Samstag oder Sonntag sollten die andren 2 auch soweit sein. Mal schaun, denke werde auf 2 mal waschen.. Tag69 Alle 3 haben es geschafft. Es wurden wieder die Top's zu trocknen ins Zelt gehängt. Der Rest kam ins Gefrierfach. Morgen wird Dan die Waschmaschine angeworfen👍 Gewogen hab ich nur mal das zum Waschen bzgl. Ertrag.

Week 6 Light cycle=18/6 Light Power=120w 50% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.4 DLI aim=35-40 EC aim=1.9 PH aim=6.2 Fri 26/1/24 #1 (Day 36) 📋 defoliate lower leaves that hardly get any light. Sat 27/1/24 #1 (Day 37) 📋 H=42cm D=39cm DLI=32.5 Raised light about 10cm Increased light power to 140w H=42cm D=49cm DLI=30.1 Sun 28/1/24 I have decided today is going to be the last day of veg before I flip to flower. Lights will have come on today at 6.00am and go off at 10.00pm, they will get 14hrs light today and tomorrow will be day 1 of 12/12. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=Veg nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra grow=4.0ml/L Roots=0.2ml/L Easy Ph down=0.125ml/L Ec= 2.05 PH=6.1/6.3 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=12L Total volume left=2L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.7 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 38) 📋 With no information for flower time I'm going to have to guess she will be finished in 45-60 days. I removed quite a few lower nodes that probably won't break through the canopy, they where ideal candidates for clones. Light cycle=12/12 Light Power=140w 58% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 21.5c Radiator off= above 22.5c Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Mon 29/1/24 Lights on at 10.00am off at 22.00pm #1 (Day 39)(Day 1 flower) 📋 H=45cm D=46cm DLI=23.1 At 9.00pm increased light to 150w H=45cm D=46cm DLI=24.0 Tue 30/1/24 #1 (Day 40)(Day 2 flower) 📋 Wed 31/1/24 #1 (Day 41)(Day 3 flower) 📋 H=48cm D=43cm DLI=28.4 🚿 foliar sprayed (Sumo Boost 2ml/L). Thur 1/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0.ml/L Ec=0.2 PH=6.6/6.6 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=14L Total volume left=4L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.0 PH=6.1/6.2 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 42)(Day 4 flower)**** 📋 H=50cm D=41cm DLI=29.0 Lifted light and increasd power to 196w. H=50cm D=50cm DLI=29.5 She is doing great, has a nice height and shape to her. No problems still. She has been under 12/12 for majority of the week. Back soon. Take it easy.

They're super happy adjusting to the new tent and 5 gallon containers. It's been 2 weeks since I first moved them in here and so I flipped them today. So 3 weeks from now we should be seeing buds :) I also raised the light about 10-12 cm to hopefully encourage more vertical growth. I plan on lollipopping them in about a week or so, too. Cover crop is sprouting so that's a great sign also.

Finally coming to a close. I started this thing almost 5 months ago in the middle of the woods... the nugs are the densest I have grown so I’m excited to see how it finishes. I also have this northern light auto next to it with a nice layer of trichomes

First feeding of week 3 juste before taking pictures!! 😁🍀✌️ Day 17 one of the gorilla melon looking not really happy after feeding!! She was doing great I don’t really know yet if it’s a deficiency or over feeding but I’ keep an eye on it 💚✌️ Day 18 I accidentally dropped a full bottle of water on my gorilla melon, which split in two at the base and break the pot😭she wasn’t able to stand alone so I hold her luck she continue to grow 🍀💚✌️