She is growing, nothing special.

Day 68 flower. I stopped using the Ripen on day 65. Since then I've been using Florakleen at 2tsp per gallon and RO water only for flush. Pineapple express is flushing at a faster rate still. I had to brace several colas because of the size so I'm really watching closely for any molding issues. I'm planning to hang her up at day 71ish. Rainbow cake is turning a little purple. It looks like its almost finished and I'm planning to pull around day 71 as well. London mint cake is finishing up nicely. I think she's going to need a little more time flushing so she might get pulled a little later than the other 2. Hope you like my pics and videos!

Welcome to my Øpium diary. In this diary: Seeds: sponsored by Ðivine Șeeds Media: Promix HP Nutrients: Advanced Nutrients, Diablo Nutrients. Light and Weather: Şun☀️and Mother Earth.🌎 ___________________________ Feeding: Wed 12Jun: 4L nutrients pH'd 6.5 Thu 13Jun: 2L water not pH'd in bottom saucer only. Fri 14Jun: 4L water not pH'd Sat 15Jun: 4L water not pH'd Mon 17Jun: 4L water not pH'd ___________________________ We had a beautiful week with fresh days and nights, nothing out of the ordinary besides Thursday's wind gusts followed by thunderstorms during the evening and night. She got knocked down by wind gusts on the afternoon and also past midnight..... I didn't sleep too well after that😅but she was still standing up on Friday morning. ___________________________ Thanks for stopping by, likes and comments are appreciated!👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨

Heute ging der Grow zu Ende. Ich hätte wahrscheinlich noch eine Woche warten können, hatte aber keinen Bock mehr und will mein neues Autopot System zeitnah installieren. Die Pflanze sieht super aus, die meisten Sonnensegel sind schon im Laufe der letzten Wochen abgefallen. Hab Sie heute 2-3 Stunden nach "Sonnenaufgang" abgeschnitten, umgedreht und aufgehangen. Ziemlich stressfrei, wie der gesamte Grow. Bin gespannt wie viel ich ernten werde und in ca. 10 Tagen sollte es soweit sein. Die Luftfeuchtigkeit wird für die ersten 2-3 Tage auf 55% eingestellt, anschließend werde ich es schön langsam auf ~60% RLF lassen und hoffentlich in ziemlich genau 8 bzw. 9 Tagen beschneiden und einlagern können. Dann gibt es auch ein Update mit dem Gewicht. ________________________________________________________________________________________________ The grow ended today. I could probably have waited another week, but I didn't feel like it and wanted to install my new Autopot system as soon as possible. The plant looks great, most of the fan leaves have already fallen off over the last few weeks. I cut them off today 2-3 hours after “sunrise”, turned them over and hung them up. Pretty stress-free, like the whole grow. I'm curious to see how much I'll harvest and it should be ready in about 9 days. Humidity will be set to 55% for the first 2-3 days, then I'll let it go nice and slow to ~60% RH and hopefully be able to trim and store in pretty much 8 or 9 days. Then there will also be an update with the weight.

Gals are hardening up, guessing 1 more week or so, starting to monitor trichomes. Stopped MKP a few weeks ago but seeng some signs of K def so adding in a small amount at the end of this week (0.5g/gal).

Advertised 56 day flowering. Mad yellowing I think is root bound stress, over watering/under watering, magnesium deficiency... I have no idea. I top dressed with myco, azos, and a bunch of soil to give her some extra food for the last 3 weeks. I'm hoping it'll solve any issues. I'm going to put the airpot into a 7 gal cloth pot to try and relieve some root bound issues. I never intended for her to be this big in a 2 gallon... She was an auto after all that never flipped.

Not much to update. Buds stacking nicely.

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

Ready for march/april!

Welcome guys Finally here we are with the conclusion of this cycle with two NICOLE KUSH 👱‍♀️👱‍♀️🌱 Version from @supersiberia seed bank I have growed all two in the same way (lights, pot, nutrients ecc) One of them was more sweet in the aroma, but each one with a kushy base Anyway, back to the harwest time 👇 The plants is placed for entirely in a cupboard upside down, after the cut, with the leaves still attached.. After about seven / ten days, when the leaves were pretty dry, the flowers crunchy, but before the branches break cleanly...I cleaned all the buds thoroughly, I cut them off the branches and put them back inside of a brown bag. .for about a day / two Later I placed everything in a classic glass jar For 24h I left it closed ⏳ Then I started opening it several times a day More or less, after about three weeks, I usually close the jar permanently and wait a few more weeks to start using the flowers 🔥 About taste and effects 👇 The flavors in smoking are exactly the same you can smell in each one..is good but in the long time i prefer different Kush strain.. The most sweetness one has a taste like the terpenes you can find in a strain like Critical or skunk.. Not my favorites 🙌 The effect is pretty relaxing and staying chill Body stoned Is not my first choise but in the end is enjoyable The plant in growing is also great to see Nice dense buds with a good amount of stickiness 👌 I have growed her in a 3,5l airpot (not the original) with organic liquids nutrients, added in to a soil / cocco / humus and perlite base But if you want to learn more about, check out all my previous weeks 📆 I want to thanks @supersiberia for the seeds 👍👍👍 And to @growdiaries for make this possible 🙏 FC ✌️ 🇮🇹

Another week passed and all plants looking much more tough, healthy and new leaves are not curling at all. So recovery after wind burn went well. Also, yellowing stopped on new leaves, so I fixed mag deficiency I guess. Plants started to produce nice tropical smell, and I know its a good sign. Also lots of trichomes started on all jacks and critical jack. Only the talles plant, Somango, is still not fast as others but I guess its just becouse of the pheno. Cheers guys!

The Fastbudauto From Sweetseeds are the last strains of these bank to becomes flowering, but Still looking greatly and creating Amazing cola's,we are glad to have these companies in our testing genetics. Hopefully we will get the videos up on Time.

hello, quick update.. I got another fan which is amazing.. čubičky (my plants) looks healthy and that's most important.. <3

Day 20 - she got 16oz of water pH balanced to 6.0~ on Day 16, Day 18, and Day 20. I topped the plant and then defoliated to leave the 3rd and 4th nodes. The 3rd node is being trained to grow laterally until it reaches the container walls. Once the 4th node matures more, it will also be trained just as node 3. The goal is to train and top one more time in veg to ensure maximum yields in this small 2x2x4 tent.

We're at 16 Tops already, probably won't go for 32 though but we'll see. I also used some more hardware store fertilizer which the plant liked a lot.

Diese Sorte brauchte neun Tage zum Trocknen. Curing in Weckgläsern mit Boveda 62% für mindestens fünf Wochen.

The buds shine like a shooting star mad sticky too⭐️ First thing that hits me with the smell straight up like canned pineapples in syrup🤤🍍

Bad news! TG1 got mold. I harvested immediately as she was the closest to done and to try to save the other plants from the same fate. Only one bud was moldy, I chopped it and turned it into butter, best decision ever I got so high. TG2 is looking good, smelling good. Just trying to keep humidity down and finish out this grow strong💪

Well haven’t been giving her too much camera attention. I think I’m also gonna need more space too, I have too much I want to do at one time lmao. But pineapple definitely still popping off. She’s kinda just been growing flowers and defoliating herself lmao. I’m probably gonna turn her and the blueberry on soon, due to my space limitations. Maybe in another two weeks, idk 🤷‍♂️🏾 STAY TUNED