STARTING TO SHOW SOME N DEFICIENCY ON THE LOWER FAN LEAVES. WILL NEED TO AMEND A LITTLE THIS WEEK TO CATCH UP. BUDS R NOT BIG. NEITHER IS PLANTS. I THINK STILL EASIER TO GROWN INDOORS. MORE CONTROL AND AUTO SEEMS TO GO BETTER INDOORS FOR ME. I DONT KNOW IF OTHERS FEEL THE SAME WAY. BUT DEFINITLY MORE ECONOMICAL TO GROW OUTDOORS DURING SUMMER SEASON. FREE SUN.

The girl's upper leaves look terrible :( I didn't manage to give her more potassium in time :( Well, the flowers bloomed really well, they are not small, and there is definitely a lot of sugar on them :) the smell is also amazing :) apart from the upper leaves, everything looks pretty good :) when I cut her, her image will change :) I think she has max 2 weeks left ;)

Hello, long time, no grow. I’m trilled to start on a new grow project, i’m away from growing a long time, but my love for ot was always present, i miss it a lot so i have got a few strains from Fastbuds to test and come back with a minimal setup. I have got the Fastberry, Bluedream, and the 1:20 cbd, they have sent in the Banana Purple punch Ok, so what is a minimal setup? For this grow i have choose to grow in my balcony, it is fairly big and i gave good sunlight, we are in summer now, so temps are high, swinging a lot. It is raining often as well so I did not need to water much. For the nutrients i will go organic i think, in my substrate i have about 30% warm castings, so i’m good for till mid grow length +-, i might add a bit of nutrients in 30 days mark. The objective of this experiment is to use as little as possible, 360 degrees. For the germination process i have used a mixed process method, that i have learned from Fastbuds and i have loved it, 24h in a glass of filtered water, paper towel for about 24h -48h and then the Floraflex gremination pellets, i have tested on the jiffy and worked fine as well. Cool about this method, if you are more on the anxious side or like to control more the process this is the way, you can follow the hole process and see the development in parts. I will add images later on, for this breakdown. Well that is it, lets hope for a cool, safe journey for this girls.

3x3 Tent (Variety of Clones) - Day 42 incredibly strong smells coming from tent, so checked tricomes for first time and found 90% cloudy, 15-20% amber, so decided to harvest the four plants. Black Cherry Gas could have waited another week or so before Harvest, but decided to pull along with the joining four b/c tent is doubling for drying (space issue). 2x4 Tent - Heading into week five of flower. Noticed the French Macaron had a taco effect on leaves. Decided to adjust LED lighting down to 60% to see if that helps. Ph still coming in at between 6.5 and 7. For soil this is an acceptable range, IMO. Continuing to Ph water along with weekly soil program regimen. French Macaron seem to respond to lower PPFD readings. Later in week adjusted LED from 60 to about 70% intensity. PPFD readings between 500-700. 2x2 Tent - Defoliated the one Afgooey Auto plant in the 2x2 tent with Ph/soil program watering. Applied small amount of soil program watering to clones, since they're slightly moist from previous watering. Clones continue to reveg and are showing positive signs of growth.

1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.

What should I say? Everything is fine..... Happy x-mas....

Super frosty and stinky lady, super good strain,same aroma as her sister, smells super sweet,unfortunately she didn't got a good enough size so she's not gonna be very productive, I hope to grow her again to be able to get a bigger yield of this sweet organic nuggets! 💚🌱🤞

Sorry for missing a few days of her grow guys! I'm so sorry about that, I like to always have6ny diaries updated. This lady hasn't really grow too much after I started training her but anyways. Her aroma is very sweet like a perfum, her sister smells the same too which is awesome news for me! She's being 100% organically grown with Biotabs organics! 💚🌱✌️

These are the last moments of veg, soon switching to flowering 💪

After a 7 Day dry, theyre ready for the bags. Did a final dry trim of them, was thorough but not overly. Excited on how they will smell and taste once cured!

It's been hot and humid all week, so I had to open tent and run big fan to keep temp from going passed 83. Also used only water a few times to try to get some nitrogen out of system it is a bit to green. Hopefully stretching is complete up to 34 inches now from just 12 inches right before flip so this is nearly triple in size. Continued trimming fan leaves on lower 3/4 left as many as I could that were not blocking light which is always so few. Altogether going well.

Gracias a @James, Royal Queen Seeds y MarshHydro sin ellos no sería posible hacer este diario. La Tropical Mirage es la última creación de los maestros de la cría de Royal Queen Seeds. Trabajando mano a mano con el DJ y productor Henry Saiz, nuestro equipo se propuso crear una variedad que sirviera como chispa de inspiración para las personas creativas de cualquier ámbito de la vida. Y ahora, por fin podemos presentar el resultado. La Tropical Mirage desciende de la todopoderosa Zkittlez, uno de los híbridos más populares del mundo. Es el resultado de un cruce entre un esqueje seleccionado de la Forbidden Zkittlez y la Melonade, y es afrutada, edificante e inspiradora. Sus flores densas, alargadas y resinosas desprenden intensos aromas y ejercen un subidón energizante capaz de impulsar cualquier proyecto creativo, desde la música y las artes visuales hasta la escritura, el baile y mucho más. En el cuarto de cultivo, la Tropical Mirage es rápida, fiable y muy productiva. Con una serie de cuidados básicos, esta variedad tan resistente te dará suficientes cogollos para mantener tu flujo creativo en acción durante todo el año. 🌻 🚀 Consigue aquí tus semillas: https://www.royalqueenseeds.es/semillas-feminizadas-de-marihuana/647-tropical-mirage.html 💡 Mars Hydro TS 3000, como la lámpara de cultivo LED más grande de la serie TS, ofrece suficiente cobertura para un área de 4 × 4 pies con un precio asequible y rendimientos de calidad; a cambio, se puede aplicar tanto al cultivo doméstico como al cultivo comercial. Potencia - 450w Cobertura Vegetal – 5×5 pies Cobertura de flores - 4 × 4 pies La opción abrumadora para la mayoría de los productores que la aplican en tiendas de campaña. Consigue aqui tu lámpara: https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 📆 Semana 9: Gran semana en la cual se ha incrementado la cantidad de resina, los cogollos se han hecho mas duros y los colores son para verlo en persona 😎😍. Hubiera querido algo mas de masa vegetal en floracion pero por problemas personales no pudo ser. Estoy muy contento con los patrocinadores, gracias a todos Últimos riegos con nutrientes 💣, dejo de aplicar Sticky Fingers y Bloom Booster y bajo la potencia del 100% al 80% con mi

…

Mother Gorilla is a new and improved version of Royal Madre. The strain is a cross between Reina Madre (Queen Mother) and Gorilla Glue (GG # 4). As with any cross, the offspring have pronounced Reina Madre as Gorilla types and everything in between. Reine Madre has a complex terpene profile with sweet, sour and spicy aromas. However, the buds are rarely pronounced sweet or sour. The vast majority of the plants are rather spicy. However, it is difficult to give a specific description of this spicy aroma. When smoking, you can recognize it by its specific taste. The Gorilla specifications are also there: high in THC and the fantastic aromas of pine, chocolate and diesel. Mother Gorilla has a stimulating sativa-dominant effect. Energy and excitement without being overwhelming. A stimulating and creative effect. Euphoric at higher doses. The strain is great for small gatherings and parties and puts you in a social mood. It is also ideal to enjoy at home, if you are looking for some inspiration and introspection. The taste is rather spicy. With some plants, this gives a pronounced taste that may not please everyone. Sweet and sour is always well balanced, but never pronounced. The effect is mild and rather social. Larger doses really create a strong euphoric mood. The plant is fairly easy to grow. Her branches are fairly sturdy for a sativa, but also flexible enough for just about all pruning and bending techniques. Flowering time is at least 9 weeks. I am very satisfied with the autopots. You can leave for a few days without worrying. I wouldn't use them if you live on a floor. Occasionally they leak sometimes .... The pots are wet and heavy, but strangely enough you don't have problems with budrot. Here is a list of all 16 plants: # 1 89cm 13.9gr Small Plant, Small yielder. Incredibly soft aroma, with a very subtle Reine Madre taste. Delicious! # 2 144cm 53.0gr Beautiful large plant with a high yield. Beautiful buds. Sativa. Hazey. Excellent! # 3 144cm 33.0gr Pronounced foxtail sativa buds. Lower yield. Softer aroma than # 2. # 4 129cm 28.7gr Perfect mix between sweet and sour aromas. What a beauty! # 5 117cm 37.6gr Surprising yield for this smaller plant. Balanced sour / sweet. Great! # 6 92cm 21.2gr Beautiful plant. Seems a bit like the small version of plant # 13. But here too the aroma is less pleasant. # 7 123cm 29.0gr Hazey taste due to the many sativa influences. But also surprisingly sweet. Sugared with trichomes. Superb! # 8 124cm 38.0gr Good hard bud yield. With a pronounced strong spicy Reina Madre aroma. Don't stick your nose in the jar for too long. Splendid ! # 9 102cm 24,7gr Most beautiful Sativa-style buds, swollen, hard and ripe. Magnificent! A lust for the eye. And that taste ... incredible! # 10 65cm 16.3gr Small plant, low yield. Small tops with beautiful brown pistils. Subtle slightly spicy sweet Reine Madre fragrance. # 11 71cm 15.6gr Too bad about the low yield, but what a wonderfully soft and sweet aroma! The tops smell like super soft shortcrust with a very light touch of vanilla. Fantastic! # 12 111cm 24.0gr Less pleasant odor. Catpiss ... # 13 113cm 54.0gr Very different plant. Looks a bit like Critical 47 from Positronics that I once grew. Plant # 6 is also such a phenotype. Probably stray seeds…. Large yield of skunky buds with many orange-brown pistils. However, the fragrance is not skunky, but unpleasantly sour. # 14 92cm 21.4gr Top quality. Firm hard ripe swollen buds. Beautiful brown pistils. Many trichomes. Fantastic aroma. Splendid ! # 15 126cm 67.1gr Extreme heavy yielder. Rocket-shaped mega top. The weed is less beautiful and has less trichomes, but does have the typical Reine Madre smell and taste. Topper! # 16 88cm 16.4gr Small plant with small buds and relatively much leaves. Low yield. A lot of trichomes.

>On the first day of this week (113rd) I cut off the upper part of the main branch since I was able to see that about 30% of the trichomes were already amber and fully developed! However, the rest of the plant still has something to develop and will be able to receive more light this way >On the last day of this week, cut 2 more branches since they were really well developed and now the rest of the plant can have more space to finish the lower and smaller branches

Week 7 Flower-day 2 16/10/2025 Nutrient change Floramax veg 1: 1L Floramax flowering enhancer: 400ml Floramax organabud:400ml Floramax rezin: 100ml ( around 1/4 dose) Floramax cal mag: 100ml Gp3 pro cal: 100ml ( unfortunately ran out and won't have any until next week ) Gp3 massive bloom: 100ml Cyco platinum series silica: 200ml Sleeps with the fishez: 400ml ( half dose system shock testing to see of this minimises/prevents problems per nutrients change like i was having ) Ph 5.9-6 - EC 2.2-2.3 ( Floramax wants e.c of 2.4, so I'm doing .1-.2 under for now to see how she responds No lst changes or defoil today, just let her heal and recover. I thought I should add, with the way I lst, I like to get as much defoilation out the way before flipping to flower that way all she does in flower is just get fat and lovely. Seemed to work well coming from only doing Autoflowers so just using that knowledge and implementing to my photo grows and tweaking it

Week 11 of flower, 10% amber trichomes 90% milky, waiting a bit longer as I want a bit more amber.

10/20/24 #1 mainling is going good. plan to transplant to final 3 gallon pot soon. #5 seems the most hardy and lives anything thrown at her. dry environments. humid environment. shes happy all the time. i dont remember which number off the top of my head but it wouldve been the tallest plant. the only one that ive topped so far because she was stretching more than the rest. she has a strong pungent dank stank smell coming off of her already in veg. so thats something to note and i will definitely be keeping an eye on that. #4 has been transplanted into a 5 gal fab pot and placed into my flowerring tent. im probably going to start a separate diary for each pheno through flower because they will all probably be flowered at separate times. they may overlap but they will all be on different time tables because i have my plants on a cycling through the flower tent. not necessarily a planned out perpetual grow yet but similiar in the sense of plants being pulled down and new ones ready to go. 10/22 transplanted #1 into her final 3 gal pot. training is set now she just needs to grow bigger before 12/12 10/25 transplanted #5 into a 5 gal fabric pot. also she is already showing purpling on her leafs