Starting the flush this week and she should be ready to harvest next week! I’m not getting any Runtz terps— more nutty piney terps on this one. She’s happy she’s healthy and almost there! 🏻💚

Ok so this week, I'm a little concerned at the height and structure. We all know the typical Christmas 🎄 tree shape. Well, I have an inverted, or upside down Christmas tree shape. I'm going to need to stake the base, as its very top heavy, and I'm concerned that it will topple and snap the stalk. Also, I cannot LST the plant as necessary due to the top heavy nature, as well as the extremely thick main stem which will easily snap if I were to train her. The plant is also suffering from light stress. The leaves are folding up, and down. The leaves haven't darkened up either but this may just be the strain. I have lowered the intensity of the lighting a few times, but due to being un-trainable, the plant will keep growing into the light. I'm having a headache trying to figure out what to do with her, so if you have any ideas please let me know in the comments! Anyway here's what I did this week. 14.7.25: I watered with 2ltrs of dechlorinated water PH'd to 6.4, containing the following nutrients; 💜 2ml Ecothrive Trace 💜 1/4 TSP Ecothrive Biosys PH: 6.4 PPM: 365 15.7.25: I watered with 2ltrs of dechlorinated water PH'd to 6.6 with; 💜 1/2 TSP Mega Crop Part B 💜 1/4 TSP Ecothrive Biosys PH: 6.6 PPM: 746 18.7.25: I top dressed with the following organic dry amendments; As a base for the dry amendments I used: 🧡 Worm Castings - 2 Cups 🧡 Coco - 2 Cups 🧡 Perlite - 1 Cup Dry Amendments: 💚 Ecothrive Life Cycle 1TBS 💚 Ecothrive Bloom 1 TBS 💚 Ecothrive Charge 1TBS 💚 Diatomaceous Earth 1TBS I watered with 2ltrs of dechlorinated water PH'd to 6.4 with 2ml Ecothrive Trace. PH:6.4 PPM: 340. Thanks for stopping by this week and if you have any ideas let me know in the comments section below 💚😊🍃✌️🌱🙏

Firstly, the video of the popcorn bud from the mother plant, is showing what’s known as xylem sap from a process known as guttation. I never new that until this. Additionally, I am sorry to have missed out on so much documentation. I can talk forever about my plants so this will be short and to the point. Fast vigorous growth. Very resilient and hardy strain able to shrug of cold damp conditions, and freezing nights down to 32 Fahrenheit. The immune system seemed to be very strong. Never did I find any pathogens or even pests! A few but those little ghost spiders really helped out. During harvest, a thorough inspection resulting in surprisingly clean product! Finishing with large “airy” buds with fat bracts covered in trichomes. A rich musky cheese smell that surprisingly tastes of berries! I suppose I’m getting ahead of myself. But I was able to finish cure and smoke test the mom before harvesting the clone. Finally: this fast 50-60 day pheno will continue popping new bracts up to 90 days!!!! Or at least the mother in the tent did. Also, the dry weight is an approximation as I’m not finished with trim.

Keep on keeping on

Ok so I had throw out the strawberry because it wasent an auto so now I've got three the sour diseal which is shooting up , the Nefertiti seems to be still going and then the big lemon ami

Day 15 - Watered again today. Plant grew quite a decent amount and the stem has finally begun to thicken. Will need a bigger humidifier for sure, and then one that can automatically keep humidity at a certain % Day 16 - Growth is definitely starting to take off. Stem is finally getting thick enough to where LST seemed to be a good idea to start. Smell is getting stronger, but still can only be sensed when holding the plant to your face. Will probably need to plant into the final container in a week. Going to also add another light (105 W) by the end of the week. Day 18 - Watered, got new humidifier. Just using that for now in the whole room, since it gets too dry in here anyways with the heating. Day 19 - Transplanted to what should be the final container today. Was a good time to transplant too, the roots were beginning to bunch up at the bottom of the previous container. Using Atami Bio-Growmix as the soil now. Accidentally damaged one leaf during the transplant. Stopped with LST for today to let the plant recover a bit from the transplant. Then will resume it tomorrow. Might be trying out SCROG...but first will read more about it. Also thinking of FIMing soon...but also going to read a little more and let the plant recover more from the transplant first. Have another lamp now, the 105W. However, didn't realize that it has a low kelvin value. So getting a couple of new higher kelvin lamps soon. Will just use the 105W in combination with a 125W during flowering. Smell is increasing, but not noticeable outside the tent. Day 20 - FIMmed today. Not sure if it was a great idea, the part taken off seemed to have possible beginnings of flowers inside. Not certain though, so yeah...will see what happens 😅. The third set of fan leaves turns out to be 7 leafed, so she went straight from 3 leafed for the second set to the 7 leafed. Is that a good thing...? Also resumed LST. Day 21 - Seems like the plant might be recovering from the FIMing. Temperatures got way too low last night though, at 60 degrees. Since two 125W lamps (5500K) are being used now, the temperatures are getting a bit warmer, from 78 to 80 degrees. So it's important that the night temperatures don't get that low again. Was thinking of eventually doing three 125W lamps with the 105W for blooming phase, but that will probably be too warm even with an extraction fan (the 105W, being older, produces more heat than the 125W). Not yet sure what will end up being done for the blooming phase lighting. Tomorrow is week four...flowers will probably start appearing soon by the end of the week. Hope it's been able to fully recover from FIMing by then.

420 Fastbuds FBT2301 Week 5 These two girls are starting to transition into flower very nice. Don't mind the dropping in the leafs my lights just came on. Over all haven't done really much besides another defoliation and lollipoped them taking off the lower 3 nodes. Should allow them plenty of light through flower and air to prevent moisture build up at pot level. All in all Happy Growing

Chà chà, thời gian thu hoạch của hãng là 63 ngày. Nhưng có vẻ những chồi đã chín sớm hơn dự định, những hạt trichhome cũng đã chuyển sang màu hổ phách. Có lẽ 1 tuần nữa tôi sẽ flush và thu hoạch.

So, this week I cut phosphorous intake in half, and did a small cleanup job, removing some leaves. Plants look really healthy, except I would've expected they showed nitrogen deficiency signs since then, which suggest soil might be keeping some nutrients. Not sure if that's good or bad (certainly not a real issue tho). I started to flush yesterday; we'll see how it goes for the next few days. I already see a few amber trichomes, so harvest is either for end of week or next one. I'll have to travel a few days next week-end, so I try to sequence everything the best I can :) Also, I just heard about stem splitting, which doesn't seem to be a common technique among us; I'm not planning to do this to my plants (at least not yet), but I'd like to have your opinion on that; anyone tried ? What gives ? See you next week friends !

_____📅 Week 16 | 📅 Day 112 | 🍂 Harvest after the 8. week 🍂 ______ Day 112 🌞🍂🍁💐 - I decided to harvest 2 of the 3 Lemon Power Haze...Exactly after the 8th week. - I'll leave LPH#1 in the tent for at least another week. - Yield is okay...but the buds didn't get even light either...there were too many plants or too long a veggie phase... Day 122 🌞🍂🍁💐 I harvested LPH#1 after 9.5 weeks, I think that did her good Yield dry: LPH#1 - 80 gr LPH#2 - 105gr LPH#3 - 90 gr ____________________ 3 Plants 275 gr total This is now filled into 4 liter preserving jars and stored for at least 1 month with 62% boveda packs. the room temperature is approx. 18-20°. I have not included many small “popcorn buds” as I process them further. It's a big tin I think max 20-30g. #DrySpaceContest

One Plant did foxtails but its structures were really resistant. The other plants were resinous and made a pretty good yield. The buds are very consistent with both potency and flavour

Hello everyone, I've had a busy week, so this is what I have for you guys See y'all next week 🤘🤘

Third week we can say that the overtert has been solved. Vegetative growth is in full swing. G4 has recovered but is apparently 1 week late than the other 3 we will see next week.

Trasplantamos de 3 a 5 litros de fibra de coco, instalamos el goteo Netadrip y pasamos a floracion

Привет друзья! Вот и прошла ещё одна неделя. На мой взгляд растение развивается не много медленней, чем положено. Вчера начал кормить, посмотрю на динамику. Всем мира и добра!

I messed up big on this one so I think I was very lucky to get what I did...she had problems the moment I switch to 12/12 she even went 3 weeks with no watering at one point so I decided to just flush and chop so I could Lower the light for the purple glue

Continued growth, feeding every 3 days as soil dries out. Nice growth spurts noted and apical dominance broken via LST as limbs/new growth reach skyward. Minor fan leaf removal to permit light saturation and airflow to lower areas. Getting a little crowded! We will let the canopy grow towards the light another inch or 2 with minor LST adjustments or at 2 weeks from now (which ever happens first,) before we will make the decision to flip to flower cycle. Feeding 3/5 gallon per plant about every 3 days.

RAW GROW is a tested blend of all 12 RAW Soluble plant nutrients, essential elements and supplements. This blend has been proven to be an optimal all-in-one base “Grow” horticultural fertilizer. RAW GROW is used through out the entire vegetative stage. Derived from: Plant protein hydrolysate, mono potassium phosphate, potassium sulfate, cane molasses, sodium borate, copper sulfate, iron DTPA, magnesium sulfate, manganese sulfate, zinc sulfate and azomite. Also contains non-plant food ingredients: Humic acids derived from leonardite and peat, kelp (ascophyllum nodosum), silicon dioxide derived from diatomite and yucca extract. When you overlap a copper wire to attract ions, it is called ion exchange. Copper wire is often used as a material for ion exchange because it has a high affinity for positively charged ions, such as copper, zinc, and nickel. When copper wire is overlapped or wound into a coil, it creates a surface area that attracts ions and allows them to bind to the wire or gather within the space. This process is used in various applications, such as electroplating, water treatment, chemical separation processes and cultivation. Electrolysis is a chemical process that involves passing an electric current through a liquid or solution containing ions. This process causes the ions to migrate towards the electrodes, where they undergo a chemical reaction. In the context of plant growth, electrolysis is used to increase the availability of your nutrient-rich solution that can be used to feed plants. Electrolysis and nutrient rich reservoirs work well together since your cannabis nutrients are salt based. The process involves passing an electric current through a solution of water and plant nutrients, which causes the water molecules to break down into their constituent parts, hydrogen, and oxygen. The hydrogen ions (H+) then combine with the nutrients in the solution to form a nutrient-rich substance that can be absorbed by the plant roots easier. This will only work in a nutrient rich solution as it requires the salt-based nutrients to engage. This process, known as hydrolysis, provides the plant with a continuous supply of nutrients and oxygen, which can help to increase plant growth and improve yields. By providing the plant with a more efficient method of absorbing nutrients, electrolysis can help to increase the uptake of essential elements such as nitrogen, phosphorus, and potassium. Additionally, electrolysis can help to maintain the pH balance of the growing medium, which is essential for optimal plant growth. One of the key advantages of using electrolysis to increase plant growth is that it allows for greater control over the growing system. This is exactly why this is generally a technique reserved for advanced hydroponics growers. By adjusting the voltage and current levels, cultivators can custom control the nutrient concentration and pH level of the solution, ensuring that the plant receives the optimal amount of nutrients sitting perfectly on potential hydrogen spectrum. Carotenoids absorb light in the blue-green range of the visible spectrum, complementing chlorophyll's absorption in the red range. Carotenoids protect photosynthetic machinery from excess light. They deactivate singlet oxygen, which is a harmful oxidant formed during photosynthesis. Carotenoids quench triplet chlorophyll, which can be harmful to photosynthesis. Carotenoids scavenge reactive oxygen species (ROS), which can damage cell membranes and proteins. Carotenoid derivatives signal plant development and responses to environmental cues. Carotenoids provide precursors for the biosynthesis of phytohormones like abscisic acid (ABA) and strigolactones (SLs). Carotenoids are pigments that give fruits and vegetables their orange, red, and yellow colors. They also act as free radical scavengers to protect plants during photosynthesis. Beta-carotene is the most common provitamin A carotenoid. It's found in orange and yellow fruits and vegetables like carrots, sweet potatoes, and mangos. Other carotenoids include lycopene, lutein, and zeaxanthin. These carotenoids have antioxidant and photoprotective properties. In plants, Vitamin A is found as carotenoids, which are pigments that give plants their color. Vitamin A is a fat-soluble vitamin. Vitamin B plays a vital role in plant growth and development. It acts as a coenzyme in many metabolic reactions, which are the basis for plant growth and maintenance. Vitamin B helps plants metabolize nutrients, which are essential for growth and development. Vitamin B helps plants respond to biotic and abiotic stress. Vitamin B can help plants grow new roots, which can reduce transplant shock. Vitamin B can help plants grow shoots, especially slow-growing plants. Vitamin B1 Also known as thiamine diphosphate, vitamin B1 is a key component of metabolic pathways like glycolysis and the tricarboxylic acid cycle. Vitamin B3 Also known as nicotinamide or niacin, vitamin B3 is a biostimulant that can improve plant growth and yield. Vitamin B6 Vitamin B6 acts as an antioxidant and cofactor, and is involved in plant stress responses. Vitamin C, also known as ascorbic acid, is a vital nutrient for plants that helps with growth and protects them from excess light. Vitamin C acts as a redox buffer, which is important for regulating photosynthesis. Vitamin C helps enzymes that regulate photosynthesis, hormone production, and regenerating antioxidants. Vitamin C is a coenzyme in the xanthophyll cycle, which converts excess energy into heat. This process helps plants protect themselves from too much light. seedlings to young plants can feed on 200-400 PPM, Teenage plants that have a maturing root zone can feed on 350-550 PPM and adults will feed 600-1000 PPM. The more you feed plants and watch them grow you'll get a feel for how much to give them. Less is more when trying to grasp this. High level of CEC in organic soil so I'm watering 5-gallon