June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

I have cloned these of a previously grown sherb biker showing excellent structure, low leaf ratio and nice beautiful purple rock hard buds. Previously grown this plant in single pot grown among other plants and still reached 432g wet weight. This will be a heavy production plant under my biggest, brightest king bight 800w actual draw. It might even surprise me. Subscribe and stay tuned. The lights switch today. This plant has been topped and has been selected tops for a total of 36 tops. Normally this would be tight, but this plant has proven to be very low leaf count and therefore doesn't overshadow much area. 3 days ago i levelled all the tops to ~16" and removed all but one bud site on each top. They have grown by about 3" and have now been moved directly under the 800w light.

Extrema producción de tricomas de esta variedad! Gran parte de los frutos lo usaré para extraer rosin, su resina se ve ideal para este propósito. Fragancia exquisita a ponche de fruta dulce, con notas ácidas y un fondo de especias. Como mencioné anteriormente dejaré la parte de la reseña de efectos, sabores y sensaciones para cuando los cogollos estén secos y curados, por ahora solo puedo apreciar lo que mi vista y olfato me permiten captar. Totalmente conforme por la calidad de estas flores y agradecido de los amigos de Sweet Seeds por la confianza. Será hasta la cata entonces, buenos humos!

This week started with the last feedings with Top Bud (1 ml/l) and after that, flushing time... The yellowing appeared at the end of the week, and the 3 pointed leaves deteriorated faster as normal leaves so when this started the plant lost it easily and fast. The colas are getting bigger each day, carbohydrates and enzymes full dose (TopCandy 2ml/l), until harvest, as this product is recommended until the end... Added micro vita to clean ethe soil and roots, not much, like 2-3 grams No bugs, fungus or other pests at the moment. Flushing schedule: -Water-/-TopCandy-/-Water-

Week 8 begins for mandarin dreams and divine storm. All four ladies are frosty, sticky and the mandarin smell is incredibly strong. I love how these girls look and are growing under the TSW2000, they look better than round 1, grown under my own custom Samsung strip's. Thank you Mars-Hydro for the light! Thanks for stopping by growfessors 👽🌳💚

Week 3. This is where the fun begins. The smell is amazing. The stretch is crazy and the stems are stiff like bamboo. There's no loss in terps. They're actually getting a lot stronger!!

Start week 9 From the end of last week i feed Dolomite 9tbs per 1 gal of water to fix soil acidity(hope will help) and no fill any more nutrient. At this point seem to be all plant will ready for harvest in next 2 week. So additional nutrient should be not require on this period, just watering until harvest day. Over all bud of BCN looking good and Pineapple looking better from last week but still smaller than expect. I try to change light hrs. By 12/12(some local professional recommend i will try).

Day 99 - Change up for ripening. Have Moved to the Sunmaster 10K finisher to see about frosting up dem der buds. Have also moved to using Dragon Force now to get the final push on them prior to flushing them back for the harvest. Getting plenty of Brown pistils (Much easier to see under the 10K) but from last nights look, trichs were still pretty clear. Have ordered a wee USB microscope of the Big Bad Amazon to give them a better look (expecting it Wednesday) as the wee handheld loope I have is pretty pish!!! Apart from that, its now a watching and waiting game! Hope you all enjoy the vid/pics and happy growing all!!!

Seems da gal is back on track. PH hopefully corrected and nutes ramped up.

06/16/2020 Did some defoiliating, and fed Espoma Fruit and flower 9-4-3 (3 tbls top dressed) help to aid in the transition from veg to flowering, after 21st days get shorter but slowly. Might do light deprivation to induce an early harvest. I just posted a video of Red Sky #3, brother of Red Sky #1 One branch will get dusted on #1 Good news #1, clones very well with minimal effort stuck in potting mix which has 5-1-1 starter fertilizer plus myco, and tricoderma. After she settles in I will switch to top dressing with Espoma Fruit and flower 4-9-3 plus myco have 3 good clones to work with. Oh yeah apparently I put 4-9-3 in transplant pot so I guess it means nutes total is 9-10-4 maybe a mid to late top dress to finish but we see what happens!. The 5-1-1last about 6 weeks. And the 4-9-3 will last 3-4 weeks at best We see how she is doing in a month. Then I'll know better. From here on out this diary is all about my freaky princess!👍 Red Sky #1 she is getting to tall so I took clones to bring her down to size I will keep one mother plant, and monster crop the rest! Diary coming soon!

Day 67. Finally I have decided to harvest a part of the plant first and let the other one mature a few more days. Because i left the other part of the plant maturing I cant use the cabinet to dry her. So I had to make room in my closet. Humidity is 45-55% and I have added a small PC fan to move the air a little ... the last time I dried there it took at least 10 days. I'm happy with the result to be my first minigrow. The development of the plant has gone well despite my screw-ups and has given a lot of buds, I hoped they would have been a little more dense, but it was my fault to subject the plant to an excess of nitrogen. Let's see how the second cut is going, I hope they get more fat :D 1st cut weight wet: 110 gr. Minigrow 2.0 will be much better!

In the first week after switching to a 12/12 light cycle, I continued to train the plant, but I believe it'll be the last time. It already boasts 8 healthy-looking colas, which seems sufficient. Let's see how it progresses! 🌿😊

The plant is doing well overall this week! 💪 To handle a few fungus gnats that started showing up, I introduced nematodes into the soil and placed some yellow sticky traps, seems to be keeping things under control so far. She's growing quite tall now, definitely stretching up nicely, but not really filling out much in width. A true lemony skyscraper in the tent!😂💚

SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.

Day 64: one day before harvest. The look fine and smell strong. I will do another set of pictures and video with daylight. Easy grow after three defoliations and lollipopping. See you in two weeks 🍁🌌

Its going

Day 57: Flowers forming, everything good so far :) Day 61-62: Light LST, plant seems to be chill. Noticed a couple of ants, I hope they don't bring aphids ._. Day 63: Buds growing, we'll see...

📆 Semana 7 El engorde continúa con fuerza y los cogollos siguen hinchando y compactando, apilando cálices con más presión en todas las puntas. La resina se intensifica aún más y los tricomas comienzan a avanzar hacia tonos lechosos. La absorción se mantiene estable y el metabolismo sigue limpio, permitiendo que la planta concentre su energía en densidad, peso y maduración. El aroma gana presencia, señal clara de que la fase final del desarrollo floral está en marcha. Seguimos creciendo fuerte 💪!

Week 7 staring and plants are looking beautiful, time to flip to flower.. I am flipping it tonight so I will post some more updates in the coming days.. increasing watering, dimming, and fertz.. so far happy with what I am seeing.. barneys always fireeee

Pretty heavy yield for only 2 plants they smell and look astounding. Harvested in 2 parts. To allow the lower buds to densen and mature.