Jack Herer Auto
Just growing through the net now, slight defoliation only when needed, cleaned out some low hanging leaves underneath and a few hopeless bud sites under the canopy. I feel like I could probably defoliate a bit more but not gonna push my first plant, just doing as much tucking as I can to help out. Its adding an inch plus everyday of height now and I am not sure how tall she is going to stretch, Im running out of room above the lights so from here on nearly every inch of stretch will be closing that gap. 18” now will be keeping a close eye and hopefully will not have to dim my lights. Currently running 200w @ 100% veg tuned.
London Mint Ixhua Seeds
fabialien
@fabialien
Follow
Lunes 11 de marzo 7 am de 2024: Se dejaran hidratando las semillas por 24 hrs. Martes 12 de marzo 7 am de 2024: pasamos a papel dejamos por 24 hrs. Miércoles 13 de marzo 10 am de 2024: revisamos las semillas y vamos preparando macetas pequeñas para transplante. Miercoles 13 de Marzo 3:30 pm se traspasa a tierra. Viernes 15 de marzo 11:47 pm 2024, ya que abrieron bien se pone bajo lámpara 100w a 30 cm de distancia, tienen domo protector! El lunes en la nueva semana subimos el avance, hasta el Lunes... Sábado 16 de marzo 2024, de las 3 semillas la 1 ya abrió completamente, 2 y 3 están por abrir completamente.
RQS Pineapple Kush
Herbalize
@Herbalize
Follow
Hello folks Welcome for the first week of flowering 😺 ( 38 days veg ) This Pineapple Kush is growing really fast with a lottt of secondary branch ! she responded very well to fimming. Still no nutrients, just rhizotonic and cannazym with 4.5 liters of water every 5/6 days i like CANNA super soil a lot, no need to put fertilizers before bloom, ( good for 6 weeks atleast) and the roots like it 😍 Regarding defoliation, I take off some leaves every day, i dont like removing too many leaves at once I will change the MH for the HPS next week and make a little prayer so that the days are not too hot this summer 😅 I also have 2 another diaries with Rqs/Ripper strains if you want to see Peace Love & Weed GD Fam😍👊
Walzer White
bowgrow
@bowgrow
Follow
I defoliated my plants
Sweet Dreams
Elpicor
@Elpicor
Follow
Una settimana colma di cambiamenti, é incredibile come le piante senza nessun tipo di training si adattino perfettamente tra di loro allo spazio circostante, quanti sensori possiedono le piante? Come comunicano tra di loro? mi ha sempre affascinato...
Amnesia Seedstockers.
En el transcurso de la 3ra semana aplicamos un riego con 1ml/l de fertilizante Oro Negro para potenciar el crecimiento y realizar trasplante a una maceta más grande en los próximos días. ANÁLISIS NUTRICIONAL NITROGENO ORGÁNICO N 7,5% FÓSFORO P 1,6% POTASIO K 10% HIERRO Fe 0,10% AZUFRE S 0,6 % CALCIO K 0,5% MANGANESIO MN 0,3% COBRE CU 0,2% BORO B 0,25% MATERIA ORGANICA 86%
Fast buds Outdoor 2025 Purple Haze
Nargileus
@Nargileus
Follow
Die Pflanzen sind bald Reif zum ernten. Denke das wird die letzte Woche sein.
Sweet Zombie(Expert Seeds)
RunWithIt
@RunWithIt
Follow
Had to take a hiatus for about a week or two. But now I'm back in full swing! The girls are all swimming along great! I believe in my last update I discussed wanting to main line this plant. But instead I'll do some lollipopping and topping. I figure that would be less traumatic than performing a main-line this late in it's growth. The one sweet zombie clone I got to root is coming along awesomely. I've been feeding compost tea to establish benis and now their growth has really picked up. I'm really worried about how crowded it will get in this tent, so I may end up putting my clones outside once we have vegetative conditions outdoors. Either way, I'll just run with it lol. Cheers growmies! - RWI 😶‍🌫️ 😎
shorts_status_processing
FastBuds - FFT#6
2/10: I watered today with about 3/4 gallon each, plus cal-mag, signal, bembe, armor si, a little open sesame, and their final dose of endoboost. The shorter one is budding up quickly now. 2/11: Wife home sick today....postponing construction project to raise the lights. 2/12: Today, I tackled the project to raise my ceiling another foot. In addition to that project, I installed and hooked up my new AC Infinity 6" intake fan. It's pulling in fresh air from the soffit vent on the eave of the attic, and currently feeding the garden with 46f fresh air. I'm able to easily maintain daytime temps in the lower 70f's now. I am able to drive the nighttime temps as low as I want. The only issue is that the outdoor RH varies quite a bit, so I ordered a 30-pint dehumidifier to put in the top of the closet. I sprayed everybody with boomboom spray to try and mitigate the light burn damage that is likely to ensue. 2/13: The taller one is still stretching a little bit, but the 2-footer is just budding up. 2/14: I fed them today with about 3/4 gallon each including grow big, big bloom, tiger bloom, cal-mag, signal, bembe, humic acid, and I switched over from Open Sesame to Beastie Bloomz. Raised the lights another couple of inches. I did some training on them and defo'd a little bit. 2/15: Installed the new dehumidifier and rigged the continuous drain on it...works great. 2/16: I rotated the edge plants and removed some old leaves. I added another 22w 3000k 4' bar light under the canopy. 2/17: I rearranged the garden and defoliated a little bit. That's it for week 8-
Fast Version A DWC
Stork
@Stork
Follow
Day 30 Wed PH 5.7 EC 0.6 DLI 18h PPFD Water 24c Day 31 Thu Add Ph Up PH 5.3 - 5.9 EC 0.6 DLI 18h PPFD Water 21 Day 32 Fri Add water Ph Up PH 5.5 - 5.7 EC 0.6. - 0.6 DLI 18h PPFD Water 22c
Scroggernaut 3.0 - The OG Triple OG
BudXs
@BudXs
Follow
Super busy with a move and a big garden reno. Sorry, this is the only update for this week
Baby Cakes
GorkedOut
@GorkedOut
Follow
Dried the flower for 10 days, and got 184.9 grams (roughly 3.3 ounces per plant which is smaller than I expected, but it is what it is) Curing now and i'm sure the quality will be amazing.
Mexican Haze
Growin_it
@Growin_it
Follow
First week of flowering on a 12/12 cycle with explosive growth. Defoliated lower 7-14 inches of plants and nipped future larf buds. Top dressed with 2tsp of kelp meal this week. Next week will be worm castings (top dressed) and the following week with bloom nutrients. Gave it a good soaking with calmagged water and Mammoth microbials. California Light work's Solar Extreme 250 around 10" above the canopy. All is well! 💚
MARS HYDRO 5X5, TS3000, AUTO EXHAUST FAN
All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Fat Monkey auto
Day 47 for this girl. This monkey is getting tall. Real sativa this girl, cant wait for the monkey to get fat. Starting with preflowering nutes this week as this monkey stays thirsty
Erotic Adventures of Jar Jar & Reva
CalGonJim
@CalGonJim
Follow
8/10 Monday. 12:05AM FULL RETARD MODE ACTIVATED 8/10 MOnday - looking good needs water will ask Grok: For your Fast Buds autos (RF3s + Mendo Frost) at roughly week 5 in coco, target an incoming EC of about 1.2–1.6 mS/cm (roughly 600–800 ppm on the 500 scale). 8/11 4:30am 550 PPFD is solid for where those plants appear to be. Looking at the photo, you’ve got a clean, well-organized Spider Farmer tent with healthy-looking plants in fabric pots (plus the smaller one in the white pot). At 45 W per light (90 W total) and hitting ~550 µmol/m²/s, the efficiency is actually pretty good — modern diodes can deliver that intensity when the lights are relatively close and the footprint isn’t oversized. Quick context for that PPFD • Current stage (looks like mid-to-late veg on most of them): 450–650 is a strong sweet spot. You’re right in the middle. • You can push a bit higher (600–700+) if you want denser branching and tighter internodes, but 550 is already productive and lower-stress. • Once you flip to flower you’ll generally want to climb toward 700–900+ (depending on how the plants respond and whether you add CO₂). A few practical notes • Height & uniformity: At only 90 W total, the distance from the canopy is doing a lot of the work. If the outer edges or lower plants are noticeably dimmer, you may need a slight height adjustment or to rotate pots so everything stays even. • Heat: 76 °F and 48 % RH is comfortable. With only 90 W you’re not fighting heat. • Dimming headroom. The plants look happy — good color, no obvious light stress or stretch. You’re in a good place. If you want to share the exact model of the lights or the tent size, I can give more specific height/PPFD targets. 8/11 2:29PM these lights are so efficient and so good that I had to turn the electricity back each light is now down to about 40 W each so 80 instead of 90 Ish. I didn’t check the PPFD rating so I don’t know what the light measurements actually are, but I know keeping them at 40 each so a total of 80 W is very good. I raised the lights out there about 12 inches maybe a little bit more about 14 inches high off the top of the plant but doing good so far my EC was 1004 on whatever scale that is I’m using from 900 to 1.2 is what was recommended for EC.