The Grow Awards 2026 🏆
Likes
Comments
Share
@Milky_way
Follow
This model was grown for ointment production. So waiting for amber trichomes was pointless. For ointment, it is good to have the THC as active as possible when the trichomes are fully milky, not overripe.. Before applying it to my skin, I made a small piece of hash. The ball weighed 2.2 grams and was pleasantly strong, citrusy, and had a hashish scent..
Processing
Likes
12
Share
Desculpe não atualizar antes mais muito trabalho neste fim de ano adoro as cores da Red Hot tive ao total 3 Red Hot mais só fiz o diário de uma três feno tipos diferentes todos reds aromas diferentes em todos doce, pungente, frutas tropicais, owwwwww good Nice, a sweet zkitllez está muito bem também tive outras que não fiz o diário. Obrigado a todos
Likes
134
Share
@Roberts
Follow
Number 10 has been flowering strong. Has about a week left for feeding then to a 2 week flush. I gotta work with what the plant tells me. Thanks again fast buds Thank you grow diaries community for the likes, follows, and subscriptions on my YouTube channel. 🌱🤜🤛 Happy growing
Likes
8
Share
@PollenSax
Follow
It's time to harvest the seedless plants. The pigeons were very disapointed that there were no fem seeds to be had in theses first plants. The seed mothers need another week to reach the 35 day from pollination mark. You can see seeds in a couple of the photos. They're already turning brown. The plants are very hard, full and frosty! They smell like sherbert, and they all look alike. I'm very pleased:) Time to get these cleaned up, chopped down, and hung up to dry!
Likes
19
Share
Dear Growers , Over the next weeks, we’re excited to share a very special project with you: Sensi Seeds Berliner Automatic 2025 Release With dedication, knowledge, and hands-on practice, we’ll guide you step by step through the journey—watch with us as growth, development, and small wonders unfold before your eyes. Whether you're a beginner or an expert, you are warmly invited to join, ask questions, and share your own experiences along the way! Project Setup & Conditions: • Brand/Manufacturer: Sensi Seeds • Tent: 120cmx60cmx80cm • Light: 2x 200 Watt Full Spectrum • Humidity: 45% • Soil: Narcos Organix Mix • Nutrients: Narcos Products • pH Value: 5.8 A Special Thanks To Sensi Seeds for the amazing collaboration, trust, and generous support in making this project possible. Your contribution is truly appreciated! Congratulations on Your Own Projects! We celebrate your growth, your creativity, and the passion you bring to the table. It’s truly inspiring to witness at Each visit . Stay curious and keep up Growing —we look forward to welcoming you back for the next chapter soon!
Likes
15
Share
First week of flower started with a bit downs :/ leaves were hanging and I didn’t know why but some guys helped me here ❤️ changed the watering habit now. Started watering with feeding when pots were dry/light and watered until I got 5-10% runoff - next watering when pots are dry/light
Likes
3
Share
Likes
28
Share
This little girl started her journey on April 4th with germination into a water glass and finished up on June 27/20 – Day 78 from germination. She was a fun grow and was very resilient through the whole run. She spent most of her grow time in a 20/4 light schedule. She formed nice frost levels and stayed to a very nice and manageable height of roughly 20” tall without topping or bending her main stem. She was not as fussy about nutrient levels and took them well. She does like her medium on the dryer side though. Small little auto bush of OG Kush crossed with Indica genes😃 She would make a nice a plant to run while you are vegging out some photos for 6 or 8 weeks as she is not very big in size but will swell up and yield decent weight👍 She was grown in a 3 gallon fabric pot with coco coir and maybe 15% perlite. She was fed salt based nutrients……..so sorry but they are flushed out and that is what I am more comfortable with. Focus on the early growth with microbes, fungi and kelp!! She was fed the normal pattern with pH being held around the 5.4 to 5.8 range in feeding. Then as flower approached, I gave the pots a more consistent look at the runoff numbers and she was running 7.8pH coming out of her!!!!! WTF. She stayed in her pot that she was planted in and fought this issue all through the rest of her grow. The pH issues started surfacing around week 3….as we headed into flower of course. Scratching my head for weeks, I ultimately didn’t change anything other than really low pH feeding going in…….below 4 idea. For weeks she had 3.9 water going in and still getting 7.8 running off. I initially felt it was related to cheap fabric bags so I cut slits in the very bottom of the bags that stayed and tried transplanting other girls into plastic pots, which it can be fabric pot issues but I am not as convinced anymore for this run that there was an issue there, wasn’t sure about giving her Magnesium on top of Magnesium and therefore did I mess her up good on the inside early on in week 2 idea, out of options I changed back to RO water and that seems to have solved my issues……I was using tap water that was not filtered this run🤬 The pH was high so that was adjusted but with the ppm being at 185 to 200 range I chose not to buy a filter and just dechlorinated the water only. I was tired of lugging 5 gallon water bottles in and out of the basement😃 That is a difference from all other grows…..silly for not catching this by week 4! So…….back to lugging bottles in and out of the basement😂😂😂 She really started to take shape around weeks 7 and 8 and formed a beautiful little cannabis plant and grew to 20” tall and roughly 18” wide. Main focus with her was to just perform LST on side branches and let the top go…….I wanted to just let her go and see what would happen to her main cola for size and height……plus I don’t do that…….I always bend over the tops on my grows so this was a little different for myself. She grew very nice leaves and a lot of them. This pheno had a lot of leaves to her and that is fine……its not really my first choice in characteristics of a plant though..…..so much more work at trim time……Green Poison XL Auto, SWS71, was a dream to trim👍 as a comparison!! She didn’t fox tail very much she firmed up her buds towards the end. The resin production was a little slower coming out in her but by week 7/8 she was getting pretty impressive😋😋😋 White and sticky!! She smelt of woods with citrus notes…..works for me👌 There were no issues at all retaliated to pests or bugs……I threw in a couple sticky traps but there weren’t any to catch. She handled the high humidity in this run great and there were no signs of any powdery mildew👍👍👍 She is a very stable strain from Sweet Seeds! Day 63 was last feeding, flushed for almost two weeks. Rezin and Liquid Weight still given for one of the weeks but the last week was plane water. In hind-site I think I should have hit her with some Flawless Finish to help get that last bit out of her. She did feed on most of her nutrients but some of the lower leaves were still more green that I would have liked. She was cut down on day 77…..11 weeks is about what I suspect looking at her in week 7…….this was roughly 8 weeks flower time……makes sense😃 She grew for 75 days and then I decided what the heck…….she needs a hole in her stem to stress her out😃 I didn’t try breaking a branch but rather drilled a hold into the base of her stem……something new to try out. I think I will try more holes next time….max 3 I think……then I want to run a couple with cracking their stems and see if there is a difference👍 I feel more in control of a drill and its accuracy vs bending branches and they snap where they want to…….anyway it was worth a try!!!! Worst case, it made it easy to hang her as a whole plant to dry😃 This girl battled pH issues all her life and as a result the buds were not where I would have liked them. There were not fluffy…..but here were not as hard as I would like for rolling joints, so the whole girl went to concentrates She dried for 7 day as a whole plant, 2 days more in smaller branches, then 1 day curing in jars before dry ice sift. She yielded 74g of dry cured buds, 2.65 ounces. Not bad…..I don’t think her buds would have gotten a lot bigger but they certainly would have had more weight if they firmed up…..grower issue, not genetics. So…..lets make some rosin from this girl🤩 The yields on this and making her hash a perfect colour are not what this process is about…..let’s get that out of the way right away……this is about another way to enjoy and consume my cannabis for my own relaxation and medicinal needs. Taking pictures of rosin is always a challenge…..it is always dark in the pictures unless you are using a nice DSLR to let more light in. Rather than making bubble hash with water, I just used the bags to make a dry ice kief from the buds. Unfortunately I couldn’t get a block of dry ice and had to use these cubes…….don’t like these as much because there are too many surfaces beating your green plant material and your kief goes green before long when shaking. Could have done it with out ice all together…..nicer hash but lots left on the plant afterwards that way so yield is low. Used two bags in this extraction, the 220 as the bag for edibles and the 120 as the bag for pressing rosin to smoke…..dry ice hash rosin!! The yield on this from the 74g of bud was 22.4g kief. 220 bag was 12.6g and the 120 bag was 9.8g. Not great I guess but I didn’t want to keep going for 4 and 5 minutes with the bags…..these were roughly 2 minutes with the 220 being 3 minutes on the high side. You can certainly see that the 120 product is more golden in colour than the 220 but since I didn’t crazy, the 220 is still a very nice colour. Last step on this journey was then to take the kief and make our rosin. I pressed product using 37um bags with the temp set at 160 degrees. All were done the same for the most part……roughly 4 gram presses, the same temperature, and the time. The first presses were 90 to 120 seconds. If a second press was done on the pouch, then it was at the same temp but for only 40 to 50 seconds. The yield on this was just shy of 7 grams…….6.77g…..roughly 30% yield from Kief???,…..roughly 9.2% from flower???…….would have likely done better right from flower😂 😂 😂 it was fun, regardless of the yield😃 Tasty rosin!!!! Can’t beat rosin for getting the true tastes of the plants. These numbers are absolutely due to my abilities with extraction.......sure don’t judge the genetics based on my returns......she is a frosty plant and will give great returns!!!👍👍 Several pictures show that, I hope!! So that will wrap up this diary for Sweet Seeds Killer Kush Auto, SWS56. Certainly give this girl some consideration if you like OG Kush and also have space concerns in your grow. She is beautiful frosty little girl with a punch. Certainly get the usual woody and citrus notes from her rosin and she has a lasting high. She helps to get get you going and willing to finally start cleaning that corner of the room you have been avoiding…….watch out though…..distractions😃……next thing you know 40 minutes go by and you are staring at a box of DVD’s wondering what happened to CD’s…….cassette tapes (the art of the “mix tape”), 8 tracks, vinyl……ALBUM COVER ART Baby!!!!!! Then its either back for another rip, or get your crap done because the next rip leads into even less work getting done😃😃 Great job as usual @Sweet_Seeds !!! Looking forward to the next one……Cream 47 photoperiod……actually, already done germination and a new diary coming👍👍…..compare a 3 gal pot to a 5 gal pot, or a fabric vs air pot, and see what my yield differences are?? Thanks for the read and greatly appreciate the comments Growmies!!!!! Love spending time on a forum for growers to help fellow growers. Much grower love and thanks again for your time, opinions, and suggestions🙏🙏🙏 Cheers!!
Likes
30
Share
@D33jW
Follow
FLOWEEK: 4 Light: 12/12 RH: max 65% TEMP: 26C PPFD: 750 Watering: FLO21 -- Canna flores 4ml + Canna PK 0,7 ml + cannazym 2 ml (EC 1.4) FLO23 -- Canna flores 1,5ml + Canna PK 1,5 ml + Canna Boost 1,5 + Cal Mg 0,5 (EC 1) FLO25 -- Canna flores 6ml + Canna PK 1,5 ml + Canna Boost 1,5 + Cal Mg 0,5 +Cannazym 2ml (EC 1.75)
Processing
Likes
20
Share
Likes
14
Share
@Simsim
Follow
Hey Guys ! 😁 Buds are coming ! We are in the last week of feeding, next week, I will start flushing for about 10 Days before the Harvest. This week was quiet, the plant ate a lot : EC in at 1.8 out at 1.4 > 2 times per days. This week I will increase the EC at 2.0 to finish her. She beginning to smell good and to make tricomes ! There is only one thing : I got 3/4 branches that seems to be less developped than the rest of the plant > Light reflection problem ?? See you soon, keep growing !🕉️
Processing
Likes
6
Share
@Smokwiri
Follow
pictures are taken last day of the 7th week since getting the seed if i didn't use lst, it would be 27+30 cm high (measured the horizontal main stem) i added molasses this time, for taste, instead of other booster besides the pk solution also i threw in some chicken fertilizer pellets in to add some organic power to the soil i like the taste of mineral, but my heart is with bio, so i use both somehow the flower is looking like it's wanting to finsh already. very nice experiment, instead of 18-20 or 24 hours of light for autoflower, i dd 12/12 from seed, guessing that the 7 proposed flowering time would be for the 18 minimum hours of light. I think it will be ready within that time, let's wait for that moment, whatever comes out is nice, her bud is starting to make me stare already...
Likes
31
Share
@Lukush
Follow
Hey growmies girls looking amazing. They have grown immensely 😎💪❤️ They really hungry so today imma feed them some good nutrition. They are all responding really good to the sp 6500 💪💪💪 If you are interested in this led come check her out on MH site 👉 😀https://marshydro.eu/products/mars-hydro-sp-6500-led-grow-light/ SP6500, as one of the huge single bar LED grow lights, installed with top quality Samsung LM301B diodes, designed with enhanced red in broad-spectrum light, emits the highest central PPF and has the superb penetration that its major applications are for high-wire plants and greenhouses. Wattage – 650w Veg Coverage – 4×5 ft Flower Coverage – 3×5 ft Featuring a thick aluminium passive heat sink and densely arranged chips, the SP Series provides high efficacy but low heat output while minimizing obstruction to natural light.
Likes
41
Share
Están creciendo bien! he aumentado la potencia de la pantalla a casi el 50%. Estaban en 25%. Están comiendo muy bien y asimilando el producto de lujo. Dos de las tres ZKITLLEZ salieron con un solo cotiledón una de ellas está bien y la otra está mutante jeje. La otra nació sana con sus dos cotiledones y va perfecta. 🌴💚😎 Las Runtz dos de ellas no salieron y tuve que germinar dos mas un poquito más tarde🤦🏽 La única que salió bien está de lujo! 😄 Y las banana green están tirando como si no hubiese un mañana han salido perfectas y germinaron muy bien!☀️😃🤟🏼 🛑Esta semana empezaré a echarle el Tripart de Terra acuática, en el enraizamiento he utilizado deeppeer underground, Rhino Skin y 1GR de Bactohemp por 1L de agua.
Likes
18
Share
@DreamIT
Follow
Sponsored by: 🌴SPLIFF SEEDS🌴-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 29/9 it was a tough month for me but I'm back in charge. We are almost at the end of the cycle and the flowers begin to be large and the pistils begin to color. I am a little in pain but these days I can better control the situation __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Are you new to the world of cultivation and don't know where to safely buy your seeds? Fast and anonymous shipping. Check out their hilarious graphics. (no affiliate links) ✅https: //bit.ly/spliffseeds_ __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreamit" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟
Processing
Likes
4
Share
Still have these ladies in there Solo cups will most likely pot these girls this week Finally moved these ladies over to there pots looking good for now Oh yea no nuts just yet still going with PH bal water
Processing
Likes
Comments
Share
This week is looking good and the babies are coming along great, I'm loving the way pheno 1 is so symmetric, large and in charge! I started out this grow with a bit of a hick up because of the pandemic but I tell you one thing, foliar feeding saved my plants! I foliar feed my seedlings at around 200ppm I use some micro nutes, along with amino mix to foliar feed. The foliar feeding definitely makes the plants more robust, they end up feeling hard and strong! I Usually foliar feed until I flip to flower then no more!
Likes
39
Share
@Bluemels
Follow
Tag 63: Die Shogun ist ausgesprochen pflegeleicht, ich musste kaum entlauben. Genug Platz für die Lampe habe ich auch noch. Sie lässt sich sehr schnell gießen.