Tangie Dna Genetics
Podriamos haber tenido un punto de corte mas optimo, pero la verdad que un primer cultivo exitoso. Muy rico en aromas y en sabores. El olor a mandarina muy marcado y al final un toque de pimienta que hace que no sea tan impalagoso el citrico tangie. 250 g en seco, nada mal.
MarsHydro SP-3000 + Seedsman Gelat OG
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 12/4/21 ❤️🌱💡😽💨Week 9 is here!! We reduced light hours from 20h to 18h..I know being this far in flower it sounds idiotic but we're trying to give them more down time to recover because we (well I did lol) burned the ever living crap out of a few of the babies at 18 inches, lesson learned..the SP-3000 is no joke, it's very intense.. we raised the light to 22" as well.. using autoflowers to dial in wasn't one of my brighter ideas but live and learn lol..besides, we have some killer photoperiod strains immediately on deck and this yield is still looking pretty good considering.. everyone is getting a (very) little bit of P,K and cal-mag with every watering..we're also adding a few ml of grow too.. all new growth has a great color...thanks for reading if you chose to do so and happy harvests everyone! ❤️ ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 12/9/21 Color looks great on all new growth! I'd really like to try this strain again now that we've got distance set..despite the mishaps they still look like they'll give up a pretty good yield but I suspect it could of been bigger if we got that week and a half back ,but I can't be upset, at our row of good sized colas that look and smell fabulous! ❤️😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Q4 2018 | Blue Dream CBD | PC | Hi tech
ctm_dzagi
@ctm_dzagi
Follow
We continue to gain weight Some areas are already beginning to darken, which will significantly reduce their drying out during drying. New shoots climb even on the lower tier, the initiated second wave will be shorter, but not inferior in its intensity to the first wave
Love cheesee
Jonatan
@Jonatan
Follow
Muy buenas, os presento mi cultivo de sweet chesee☺️ Nacidas el dia 2 en tierra salieron del gyfi Las hemos preparado una tierra especial Hecha de una capa de piedra otra capa de tierra arcillosa, mezclada con abono de vaca natural Tambien le emos metido una capa mezclada con tierra de perlita y tierra de coco consiguendo asi una tierra perfecta en nutrientes y en la que oas raices de nuestras plantas a crecer sanas fuertes y sin problemas
GROUNDED GENÉTICS!MY FIRST TIME GROWING
Starting the second week of flowering, first day! And they are beautiful. This week was crazy! They started producing fruit earlier than I expected, and with good shape and resin, they developed really well!
White Widow Auto
👉 I started the week thinking I would be harvesting a branch or two a day. I planned on starting at the top with the Queen and just work my way down a little at a time every day or so. This was to allow the lower levels of branches more time to mature to get an even result from top to bottom as far as bud 'ripeness'. 👉So I did start with the Queen. The trichomes looked perfect for what I wanted, mostly cloudy. This Queen cola was not 'typical' when compared to most Auto flower plants Ive grown. It wasnt even the highest of the colas on the plant. It was about the size of a pine cone and frosty. I did a close trim in it and hung it on my drying rack to dry. After one day the cola was placed in a paper bag and hung until its weight was 25% of the original wet weight after trimming. That took two more days and last night it was placed into a jar with a hygrometer. 12 hrs later the hygrometer was at 91% so I opened the jar lid. I will leave the lid open probably all day, may even take the bud out of a while and put on the hanger. It will repeat the process till stable at 62%. 👉 What I found at trimming was that perhaps the flower could possibly pump up a little more. Also it has so many leaves it made me start to hate leaves. I that made me conflicted because leaves are why everything happens...food factories. I could see the issue before I got close to harvesting and I am happy I didn't go on a massive defoliation campaign. That wouldn't have helped the sugar leave issue. I have been taking leaves for a few weeks now even though it may be hardly noticeable. It took a long time to do the type of trim I like. I avoid snipping calyx's as much as possible and will snip as many sugar leaves as close as I can. The rest of the harvest of this plant is going to be penance for just a few of the thoughtless or stupid things Ive done in the past...a trim purgatory that is going to be close to trim hell. But if the end result is as good as the white widow Ive had in the past, it will be pain worth enduring...if its a dud that tastes like grass because of all the leaves then I will learn how to make extracts. Almost always a bright side with cannabis. 👉So I will continue lots of pre-trimming any large sugar leaves on colas around the top and work my way to the bottom. I will also continue nutrient laden fertigations and get a little more plumpness of the flowers to offset the leaves. The plant is still thirsty and I see new calyx's on all the buds. I'm going to mix my nutrients between the late bloom mix and the ripen mix, with extra Flora Bloom, and extra KoolBloom.
🌱 Red Pure CBD: Nurturing Tranquility with Crimson Flowers 🌸 - A Grow Report
The Red Pure develops extremely quickly. I have therefore not been able to keep up with the fertilisation scheme in time to switch to the flowering fertiliser and also adjust the CalMag ratio. You can recognise a slight lack of potassium and magnesium. Nevertheless, it continues to develop very well and you can see how the flowers and leaves are slowly turning purple.
FirstGo - AK47
First week of flower, looking good so far in the first few days. Really noticing it stretching out and the tops are popping more now. Very excited to see the whole flowering process. The bloom nutrients when mixed with the kelp and calMag brings it to exactly 6.5pH I used to have to use pH up with the grow and down still for straight water as my tap water is 8.3pH Added in a Friend (Bloody Skunk Auto) for a hydroponic grow but took out a few days later and moved under my desk to give it a 24hr light schedule to help get her going and move back in after a week and leave in there. Plant has been doing fantastic this week, no longer seeing any issues. New growth looks great. She's looking really good. Been watering 4L every two days and feed every 2 waterings. Using CalMag with straight watering feeding. 540ppm (baseline tap water is 298-320ppm) Adjusted second fan to blow better on the very top. Haven't adjusted the lights and let the plant grow to it within 30cm distance as recommended by spiderfarmer. Will start to raise next week as plant grows taller to maintain the distance. No signs of tacoing so just leaving where it is.
Red Rhino- RDWC
Week 1 Day 1 9/23/2023 I decided to go ahead and flip her to flower today, she had a stem past the net and high enough to super crop. Humidity was a little high so I added both Dehumidifiers to the tent and attached them to the InkBird. Added: 36 gallons of Water CALMag- .75mil/Gal GH FLoraMicro-5.2mil/Gal GH FlroaGro-4.3mil/Gal GH FLroaBloom-5.2Mil/Gal TPS SIGNAL- 1mil/Gal ORCA-.5mil/Gal Flipped the lighting to Flower 0800-2000, I filled with Week 1 flower Nutes, and I Super Cropped One of the Tops down. Week 1 Day 2 9/24/2023 I cleaned my canopy today, by trying to look straight down and opening up as many Tops sites as I could see blocked by leaves directly above. This will be my life for the rest of Flower cleaning and clearing as well as ensuring no sucker buds. Week 1 Day 3 9/25/2023 Today was one of those days where you can just sit back and look and enjoy some of the work you have put in. Today I just let her be.. Week1 Day 4 9/26/2023 I took the fan leaves that were blocking those beautiful bud sites from light.. Such will be my life every time I enter the tent for the rest of the grow. The clones all have roots coming from the rapid rooter, I am feeling really good that by Sunday they will be ready for selection and planting. Week1 Day 5 9/27/2023 I did some extreme defoliation today I opened the tent and she was just sooo full. Week1 Day 6 9/28/2023 I took a little from the inside and a few smaller inner stems.. I hate to take stems until after week 3 of growth to give each a chance to shoot up and hit the canopy. Week1 Day 7 9/29/2023 Took a look from the underside to see how much light was penetrating the canopy and removed some leaves and stems that were blockers. Tomorrow will add 10 gallons and the Nutes.. that will be my last in between week fill before I start having to change weekly for the rest of the grow.
"Purpureus" C#3
ANTHOCYANIN production is primarily controlled by the Cryptochrome (CR1) Photoreceptor ( !! UV and Blue Spectrums are primary drivers in the production of the pigment that replaces chlorophyll, isn't that awesome! 1. Diverse photoreceptors in plants Many civilizations, including the sun god of ancient Egypt, thought that the blessings of sunlight were the source of life. In fact, the survival of all life, including humans, is supported by the photosynthesis of plants that capture solar energy. Plants that perform photosynthesis have no means of transportation except for some algae. Therefore, it is necessary to monitor various changes in the external environment and respond appropriately to the place to survive. Among various environmental information, light is especially important information for plants that perform photosynthesis. In the process of evolution, plants acquired phytochrome, which mainly receives light in the red light region, and multiple blue light receptors, including his hytropin and phototropin, in order to sense the light environment. .. In addition to these, an ultraviolet light receptor named UVR8 was recently discovered. The latest image of the molecular structure and function of these various plant photoreceptors (Fig. 1), focusing on phytochrome and phototropin. Figure 1 Ultraviolet-visible absorption spectra of phytochrome, cryptochrome, phototropin, and UVR8. The dashed line represents each bioactive absorption spectrum. 2. Phytochrome; red-far red photoreversible molecular switch What is phytochrome? Phytochrome is a photochromic photoreceptor, and has two absorption types, a red light absorption type Pr (absorption maximum wavelength of about 665 nm) and a far-red light absorption type Pfr (730 nm). Reversible light conversion between the two by red light and far-red light, respectively(Fig. 1A, solid line and broken line). In general, Pfr is the active form that causes a physiological response. With some exceptions, phytochrome can be said to function as a photoreversible molecular switch. The background of the discovery is as follows. There are some types of plants that require light for germination (light seed germination). From that study, it was found that germination was induced by red light, the effect was inhibited by subsequent far-red light irradiation, and this could be repeated, and the existence of photoreceptors that reversibly photoconvert was predicted. In 1959, its existence was confirmed by the absorption spectrum measurement of the yellow sprout tissue, and it was named phytochrome. Why does the plant have a sensor to distinguish between such red light and far-red light? There is no big difference between the red and far-red light regions in the open-field spectrum of sunlight, but the proportion of red light is greatly reduced due to the absorption of chloroplasts in the shade of plants. Similar changes in light quality occur in the evening sunlight. Plants perceive this difference in light quality as the ratio of Pr and Pfr, recognize the light environment, and respond to it. Subsequent studies have revealed that it is responsible for various photomorphogenic reactions such as photoperiodic flowering induction, shade repellent, and deyellowing (greening). Furthermore, with the introduction of the model plant Arabidopsis thaliana (At) and the development of molecular biological analysis methods, research has progressed dramatically, and his five types of phytochromes (phyA-E) are present in Arabidopsis thaliana. all right. With the progress of the genome project, Fi’s tochrome-like photoreceptors were found in cyanobacteria, a photosynthetic prokaryotes other than plants. Furthermore, in non-photosynthetic bacteria, a homologue molecule called bacteriophytochrome photoreceptor (BphP) was found in Pseudomonas aeruginosa (Pa) and radiation-resistant bacteria (Deinococcus radiodurans, Dr). Domain structure of phytochrome molecule Phytochrome molecule can be roughly divided into N-terminal side and C-terminal side region. PAS (Per / Arndt / Sim: blue), GAF (cGMP phosphodiesterase / adenylyl cyclase / FhlA: green), PHY (phyto-chrome: purple) 3 in the N-terminal region of plant phytochrome (Fig. 2A) There are two domains and an N-terminal extension region (NTE: dark blue), and phytochromobilin (PΦB), which is one of the ring-opening tetrapyrroles, is thioether-bonded to the system stored in GAF as a chromophore. ing. PAS is a domain involved in the interaction between signal transduction-related proteins, and PHY is a phytochrome-specific domain. There are two PASs and her histidine kinase-related (HKR) domain (red) in the C-terminal region, but the histidine essential for kinase activity is not conserved. 3. Phototropin; photosynthetic efficiency optimized blue light receptor What is phototropin? Charles Darwin, who is famous for his theory of evolution, wrote in his book “The power of move-ment in plants” published in 1882 that plants bend toward blue light. Approximately 100 years later, the protein nph1 (nonphoto-tropic hypocotyl 1) encoded by one of the causative genes of Arabidopsis mutants causing phototropic abnormalities was identified as a blue photoreceptor. Later, another isotype npl1 was found and renamed phototropin 1 (phot1) and 2 (phot2), respectively. In addition to phototropism, phototropin is damaged by chloroplast photolocalization (chloroplasts move through the epidermal cells of the leaves and gather on the cell surface under appropriate light intensity for photosynthesis. As a photoreceptor for reactions such as escaping to the side of cells under dangerous strong light) and stomata (reactions that open stomata to optimize the uptake of carbon dioxide, which is the rate-determining process of photosynthetic reactions). It became clear that it worked. In this way, phototropin can be said to be a blue light receptor responsible for optimizing photosynthetic efficiency. Domain structure and LOV photoreaction of phototropin molecule Phototropin molecule has two photoreceptive domains (LOV1 and LOV2) called LOV (Light-Oxygen-Voltage sensing) on the N-terminal side, and serine / on the C-terminal side. It is a protein kinase that forms threonine kinase (STK) (Fig. 4Aa) and whose activity is regulated by light. LOV is one molecule as a chromophore, he binds FMN (flavin mononucleotide) non-covalently. The LOV forms an α/βfold, and the FMN is located on a β-sheet consisting of five antiparallel β-strands (Fig. 4B). The FMN in the ground state LOV shows the absorption spectrum of a typical oxidized flavin protein with a triplet oscillation structure and an absorption maximum wavelength of 450 nm, and is called D450 (Fig. 1C and Fig. 4E). After being excited to the singlet excited state by blue light, the FMN shifts to the triplet excited state (L660t *) due to intersystem crossing, and then the C4 (Fig. 4C) of the isoaroxazine ring of the FMN is conserved in the vicinity. It forms a transient accretionary prism with the tain (red part in Fig. 4B Eα) (S390I). When this cysteine is replaced with alanine (C / A substitution), the addition reaction does not occur. The effect of adduct formation propagates to the protein moiety, causing kinase activation (S390II). After that, the formed cysteine-flavin adduct spontaneously dissociates and returns to the original D450 (Fig. 4E, dark regression reaction). Phototropin kinase activity control mechanism by LOV2 Why does phototropin have two LOVs? Atphot1 was found as a protein that is rapidly autophosphorylated when irradiated with blue light. The effect of the above C / A substitution on this self-phosphorylation reaction and phototropism was investigated, and LOV2 is the main photomolecular switch in both self-phosphorylation and phototropism. It turns out that it functions as. After that, from experiments using artificial substrates, STK has a constitutive activity, LOV2 functions as an inhibitory domain of this activity, and the inhibition is eliminated by photoreaction, while LOV1 is kinase light. It was shown to modify the photosensitivity of the activation reaction. In addition to this, LOV1 was found to act as a dimerization site from the crystal structure and his SAXS. What kind of molecular mechanism does LOV2 use to photoregulate kinase activity? The following two modules play important roles in this intramolecular signal transduction. Figure 4 (A) Domain structure of LOV photoreceptors. a: Phototropin b: Neochrome c: FKF1 family protein d: Aureochrome (B) Crystal structure of auto barley phot1 LOV2. (C) Structure of FMN isoaroxazine ring. (D) Schematic diagram of the functional domain and module of Arabidopsis thaliana phot1. L, A’α, and Jα represent linker, A’α helix, and Jα helix, respectively. (E) LOV photoreaction. (F) Molecular structure model (mesh) of the LOV2-STK sample (black line) containing A’α of phot2 obtained based on SAXS under dark (top) and under bright (bottom). The yellow, red, and green space-filled models represent the crystal structures of LOV2-Jα, protein kinase A N-lobe, and C-robe, respectively, and black represents FMN. See the text for details. 1) Jα. LOV2 C of oat phot1-to α immediately after the terminus Rix (Jα) is present (Fig. 4D), which interacts with the β-sheet (Fig. 4B) that forms the FMN-bound scaffold of LOV2 in the dark, but unfolds and dissociates from the β-sheet with photoreaction. It was shown by NMR that it does. According to the crystal structure of LOV2-Jα, this Jα is located on the back surface of the β sheet and mainly has a hydrophobic interaction. The formation of S390II causes twisting of the isoaroxazine ring and protonation of N5 (Fig. 4C). As a result, the glutamine side chain present on his Iβ strand (Fig. 4B) in the β-sheet rotates to form a hydrogen bond with this protonated N5. Jα interacts with this his Iβ strand, and these changes are thought to cause the unfold-ing of Jα and dissociation from the β-sheet described above. Experiments such as amino acid substitution of Iβ strands revealed that kinases exhibit constitutive activity when this interaction is eliminated, and that Jα plays an important role in photoactivation of kinases. 2) A’α / Aβ gap. Recently, several results have been reported showing the involvement of amino acids near the A’α helix (Fig. 4D) located upstream of the N-terminal of LOV2 in kinase photoactivation. Therefore, he investigated the role of this A’α and its neighboring amino acids in kinase photoactivation, photoreaction, and Jα structural change for Atphot1. The LOV2-STK polypeptide (Fig. 4D, underlined in black) was used as a photocontrollable kinase for kinase activity analysis. As a result, it was found that the photoactivation of the kinase was abolished when amino acid substitution was introduced into the A’α / Aβ gap between A’α and Aβ of the LOV2 core. Interestingly, he had no effect on the structural changes in Jα examined on the peptide map due to the photoreaction of LOV2 or trypsin degradation. Therefore, the A’α / Aβ gap is considered to play an important role in intramolecular signal transduction after Jα. Structural changes detected by SAXS Structural changes of Jα have been detected by various biophysical methods other than NMR, but structural information on samples including up to STK is reported only by his results to his SAXS. Not. The SAXS measurement of the Atphot2 LOV2-STK polypeptide showed that the radius of inertia increased from 32.4 Å to 34.8 Å, and the molecular model (Fig. 4F) obtained by the ab initio modeling software GASBOR is that of LOV2 and STK. It was shown that the N lobes and C lobes lined up in tandem, and the relative position of LOV2 with respect to STK shifted by about 13 Å under light irradiation. The difference in the molecular model between the two is considered to reflect the structural changes that occur in the Jα and A’α / Aβ gaps mentioned above. Two phototropins with different photosensitivity In the phototropic reaction of Arabidopsis Arabidopsis, Arabidopsis responds to a very wide range of light intensities from 10–4 to 102 μmol photon / sec / m2. At that time, phot1 functions as an optical sensor in a wide range from low light to strong light, while phot2 reacts with light stronger than 1 μmol photon / sec / m2. What is the origin of these differences? As is well known, animal photoreceptors have a high photosensitivity due to the abundance of rhodopsin and the presence of biochemical amplification mechanisms. The exact abundance of phot1 and phot2 in vivo is unknown, but interesting results have been obtained in terms of amplification. The light intensity dependence of the photoactivation of the LOV2-STK polypeptide used in the above kinase analysis was investigated. It was found that phot1 was about 10 times more photosensitive than phot2. On the other hand, when the photochemical reactions of both were examined, it was found that the rate of the dark return reaction of phot1 was about 10 times slower than that of phot2. This result indicates that the longer the lifetime of S390II, which is in the kinase-activated state, the higher the photosensitivity of kinase activation. This correlation was further confirmed by extending the lifespan of her S390II with amino acid substitutions. This alone cannot explain the widespread differences in photosensitivity between phot1 and phot2, but it may explain some of them. Furthermore, it is necessary to investigate in detail protein modifications such as phosphorylation and the effects of phot interacting factors on photosensitivity. Other LOV photoreceptors Among fern plants and green algae, phytochrome ɾphotosensory module (PSM) on the N-terminal side and chimera photoreceptor with full-length phototropin on the C-terminal side, neochrome (Fig. There are types with 4Ab). It has been reported that some neochromes play a role in chloroplast photolocalization as a red light receiver. It is considered that fern plants have such a chimera photoreceptor in order to survive in a habitat such as undergrowth in a jungle where only red light reaches. In addition to this, plants have only one LOV domain, and three proteins involved in the degradation of photomorphogenesis-related proteins, FKF1 (Flavin-binding, Kelch repeat, F-box 1, ZTL (ZEITLUPE)), LKP2 ( There are LOV Kelch Protein2) (Fig. 4Ac) and aureochrome (Fig. 4Ad), which has a bZip domain on the N-terminal side of LOV and functions as a gene transcription factor. 4. Cryptochrome and UVR8 Cryptochrome is one of the blue photoreceptors and forms a superfamily with the DNA photoreceptor photolyase. It has FAD (flavin adenine dinucle-otide) as a chromophore and tetrahydrofolic acid, which is a condensing pigment. The ground state of FAD is considered to be the oxidized type, and the radical type (broken line in Fig. 1B) generated by blue light irradiation is considered to be the signaling state. The radical type also absorbs in the green to orange light region, and may widen the wavelength region of the plant morphogenesis reaction spectrum. Cryptochrome uses blue light to control physiological functions similar to phytochrome. It was identified as a photoreceptor from one of the causative genes of UVR8 Arabidopsis thaliana, and the chromophore is absorbed in the UVB region by a Trp triad consisting of three tryptophans (Fig. 1D). It is involved in the biosynthesis of flavonoids and anthocyanins that function as UV scavengers in plants. Conclusion It is thought that plants have acquired various photoreceptors necessary for their survival during a long evolutionary process. The photoreceptors that cover the existing far-red light to UVB mentioned here are considered to be some of them. More and more diverse photoreceptor genes are conserved in cyanobacteria and marine plankton. By examining these, it is thought that the understanding of plant photoreceptors will be further deepened.
Gorilla Punch Auto
So it's now week 2 and week one was a tough one. I believe my nutrient input was a bit to high and kinda burned my seedling and slowed down the growth a bit but I see new growth and we are one track again.
Watermelon zkittlez auto Barneys Farm
Germination date 🌰 26/01/2021 Day 49 🌱 20/03/2021 Strain 🍁 🍉Watermelon zkittlez auto Barneys farm 🍉 Nutrients 💉 All mix slow release fertilizer 3lts/90lts of soil (guanokalong) Organic Wormcastings 25% of bag and added small amount slow release organic bloom to soil. Will top, top soil up in 3weeks 5weeks 7weeks as they say they're 70day auto. Will be adding in bat guano and bloom to water 5weeks on Set Up ⛺ amazon special not super cheap 💡 spiderfarmer sf4000 📤📥 AC infinity 6inch Notes ✏️🗒️ Will take some more pictures later and update.. Coco plants are taking up all my time at the minute so lucky these autos are packed with dry amendments and keeping themselves going. Considering there not getting much attention this strain is so frosty and it stinks. I know if I put my full attention into these they would be mega frosty. Other 2 are behind and will most probably end up outside as I dont want to super veg the photo periods 1st time round. Purple matcha is growing like a beast and looks like it's going to hog a lot of room come flower. Definitely making things harder with doing photos and autos together, wont be doing that again unless I extend my grow space in the future. Pk week for the bigger one. Happy growing everyone 🌱🍁 Updated some pics, let me know what you all think. Spider farmer 4000 is proving to be a very good purchase and no I didnt pay the stupid amazon price 😂 Managed to get for under £400 on black friday last year direct so if your thinking of getting one go direct to spiderfarmer 👍🏻 Vitalink buddy and pk doings its job nicely. Girls are packing on some weight 🍁👍🏻
Winter Frost
Week 1 germination through week 1 seedling , veg Topped Training Ph water 6.0 first couple days week 1 started using Cronk Nutrient auto flower guide .
 NORTHERN THUNDER FUCK AUTO/ RQS
NORTHERN THUNDERFUCK AUTO / RQS WEEK #10 OVERALL WEEK #5 FLOWER No real issues to report this week she's looking good and doing good her buds are really starting to get great trichome coverage and they are getting sticky she also smells great. Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!!! Thank you ROYAL QUEEN SEEDS!! NORTHERN THUNDERFUCK AUTO / RQS
Exodus Cheese Run
Just got these cuttings and they’re 2 weeks old in living soil. Gonna wait a couple of days then repot in coco with dots, guano, castings and recharge.
Hakuna Matata Br
Nikkov
@Nikkov
Follow
Well, another week has passed and it has been growing not exactly as I expected, but they warned me about using only base fertilizers with an inert soil and a higher ambient temperature, I could have a not so good result, well, it's one more experience and I liked it and let's see how it will be until the end of the cycle because the next one I already ordered a starter kit from the advanced nutrients line! Let's Go!
Ayahuasca Purple
Big Bitch Downunder
Grey_Wolf
@Grey_Wolf
Follow
Big Bitch Downunder 19th April 2024 11 weeks of flowering finished 😀 The buds are fattening up nicely now and are covered in big trichomes . The smell is getting better and better every week and I am anticipating a fantastic sativa harvest. As usual cheers for stopping by 👍