So the smallest 5gal white og flipped her leaves on me. Like WHAT!!! Some research showed me cal-mag was the solution. And I know why. As I mentioned in. My other diaries - ph is off on my well water. I know this and also plants need water. So to water the hot dry plants before running Around for Work or not. I had no time for adjustments and feeding. As guilty as I feel.... well... is what it is. Got the greenhouse back on track today with a good ph water and cal-mag plus feeding. Will watch for improvement. They are all pretty hardy im impressed by their largeness. The large one has exceeded my height and is also filling out. I have topped twice and once on smaller ones. Started to defoliate some of the under leaves and other leaves that had some pest damage. No major pest issues since I battled the flea Beatles but I didn’t capture grasshopper and a caterpillar 🐛 and a white looking spider with egg sack (be gone evil beings) but these girls are outdoors and that’s where bugs live sooooo... whatcha gunna do. 🤷‍♀️🏻 Moving on. Another 6 weeks and these girls should be heading into the flowering zone. Excite to watch that phase. Hope I have enough room out there. Once temps drop around here a little more I will remove the shade screen And spread them out a bit. But I can’t yet as the greenhouse reaches temps over 100 without it.

I struggled with this plant the whole grow cycle. She still came out alright in my opinion. She did foxtail due to heat. For a first photoperiod grow in DWC I did good in my opinion. Learned a lot more, and been applying those techniques now. She grew under a Spider Farmer SE5000 light in a New Level Hydro bucket. I used hygrozyme during grow. Thank you Spider Farmer, New Level Hydro, and Amsterdam Marijuana Seeds. 🤜🤛🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Www.amsterdammarijuanaseeds.com SE5000 https://amzn.to/3qFpAML Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com UK: https://spiderfarmer.co.uk CA: https://spiderfarmer.ca EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au Coupon Code: saveurcash (is stackable in most cases) Www.newlevelhydro.com Www.hygrozyme.com

7/27/2023- Prep Tent and system are cleaned and ready to go from my last grow. I have submitted my Journa for the Diary of the Month Competition here is to hopeing for good resutls. 7/28/2023- Germination Day 0- Seed initiation Well lets get this new Grow started.. So My Dad Sent me a custom Landrace Strain that he wanted me to grow out and Breed for him. The Strain is Called Black African Magic: Black African Magic, Alson known as BAM, is a Sativa pure land race strain, It's classified under the Cannabis Sative species and its genetics come from Africa-the Ituri Forest in the Dmocratic Repoublic of Congo. The Effects are said to be Very Psychedelic, used for Stress managment and for better sleep and rest. This is my frist Land Race so we, will see how this goes together.. RO Water Used Added Hydrogen Peroxided 8/1/2023- Germination Achieved G-Day1 Popped her head above the root riot today to say hello.. Woot first challenge when dealing with an unknown seed and a new Strain is getting the seed to pop and the lady to show life. 8/2/2023- Germination Day 2 Took the root riot out today and it was soaked not good plant drowing again. I am still having a hard time finding the right blance for where the water should be to keep the root riot moist and not soaked. I had to drain some of the water out of the root riot plug to help give a little oxygen. I also removed some of the water. 8/3/2023- Germination Day 3 Looking good stretching her leaves out to let in the lights 8/4/2023- Germination Day 4 Looking good a few days until I put them into the RDWC System and get this thing rocking and rolling. 8/5/2023- Germinaiton Day 5 Looking good will probably plant tomorrow if the roots are still looking good. 8/6/2023- Plant Day- Germination Day 6 Planted into the RDWC System today. Joy when they go into the system as long as we dial that in right this will now be a great grow.. Survived the hard part.. 8/7/2023- Germination Day 7 Everything looks like it is going good, she is showing some damage on the lower leaves from the over watering in the cloning machine but right now I don't see any new damage. 8/8/2023- Germination Day 8 Added the first Nutes today, to help support root growth and to help give there first jump to growth. TPS SILICA GOLD-.5mil/Gal Root Drip- 1mil/Gal GH FLoraMicro-1mil/Gal GH FlroaGro-1mil/Gal GH FLroaBloom-1Mil/Gal ORCA-.5mil/Gal 8/9/2023 - Germination Day 9 Everything is looking good new growth looks like it is praying and they are looking happy. I will take off the damage leaves probably tomorrow. 8/10/2023- Germination Day 10 She looks like she is on track the roots are starting to come out of the basket very small but starting. 8/11/2023- Germination Day 11 Cleaned up the dead leaves... Day 1 VEG tomorrow.. Water Change Day and first real meal...

☘️10/01 - Empieza su semana decimo primero. ☘️En dos semanas le estuve agregando Top Wash, 1ml por semana. ☘️Estoy esperando que se termine de secar la tierra para poder podarla, yo creo que en dos dias ya va a estar lista. ☘️La planta se encuentra perfecta, tiene cogollos gordos y con muchos tricomas. ☘️Estoy participando para el sorteo "Best Rarest & Smallest Pot by Seedsman".

03/25/2021 Day#1 more pics later. More lite bending for shaping, looks good gave 2 liters of banana peel tea supposed to be good pk boost throughout flowering period till 2 weeks before harvest so we will see how it works I will be given her tea once a week till week 6 then plain water till chop!

A Nice sweet smell !!!

Wall of Girls (3 x Gorilla Zkittlez) smelling very potent and doing quite well. 20 gallon GZ pot girl should be ready to harvest in approximately 14 days or less. Fingers crossed

Mix packs and Gorilla Z were fed Dr. Earth w/worm castings and top dressed with compost. All plants received full strength Silica Boost foliar spray. Mix pack#2 showed 2 unopen pollen sacks (?) which were removed.

This lady is getting real big, i wish i had induce her to flower 1 week before, but shit happens :) HST to deal with it :P Never had a Blue Dream Pheno with so many sativa %, I'm sorry about the quality of pics and videos but my phone sucks, i promisse some good bud porn with better quality for the next weeks :p

08/17 day 50 start of week 8 of flower. The girl in the back looks like she will be ready by the end of the week the front one looks like it may need an extra week. 08/18 watered each with 12 cups plus saps. Leaving the heater off to drop the temps in this last week or two and gonna start letting em dry back now. 08/21 top inch of soil still nice and moist. From the hairs and trichomes looks like im gonna chop in 9 days at the end of week 9 day 63. 08/22 woke up to saggy fan leaves watered each with 12 cups with saps. Starting to see some fade as well

Good week so far. 😎 Ups and downs,but learning tons along the ride.🤓 The plants are responding well to the flushing (yes flushed again) color is much better and just the general appearance looks good after 2 days. 💪🌱💪 Lst seems to have been received well, no extra stress to these girls. 🙏 Will continue to update with pics and vids throughout the week.

The pictures speaking for themselves...added some plants that would go to seed after being cross bred with Khalifa Kush. This week onward the girls would be fed black strap molasses for taste and big bud.

Changed a couple things up with the nutes after noticing some cal/mag. def... Everything is looking amazing. Pre flower has officially begun. Looking to get some Liquid KB in here pretty soon too. Starting to stink insanely bad (but great

my method of cultive was the germination based from a simple kitchen's sponge and a tupper glass lately... my girl is 1 day old lately... my girl is 6 day old

smell strong on this week

AMAZING WEEK! The environment is reading for flowering. Lighting, feeding, watering, air temp and CO2 are all stable and should give my plants a stress free life. Humidity is still high, so I'll need to come up with a plan for dealing with that ASAP. I've introduced CO2 into the grow with my brand new AirBomz unit. It uses a light sensor that releases CO2 when the lights turn on, and then uses a timer to release every 2hrs until the light switch off. I doubt I'll reach the 1200PPM stated by the manufacturer, mainly because I'm running an extraction, but I figure some is better than none. Cool controller also included. After doing some reading I can see there's two things that I need to look out for: A) Switching off the extraction so it doesn't suck away the precious CO2 before the plants have had a chance to absorb it B) Making sure the room doesn't get too hot whilst the extraction is off, causing heat stress My solution is: A) Switch off extraction for 15mins at the AirBomz 2hr interval B) Use the Temp Controller the switch off the circulation fan when temp exceeds 27C C) Controller then switches on the active intake when temp exceeds 28C D) Temp is held at 29C whilst the extraction is off D) Extraction turns back on after 15 mins, temp drops below 27C E) Temp controller switches off active intake... F) ...And switches on the circulation fan G) Repeats every 2hrs NEXT WEEK: Work out how much the girls are drinking! I'll know when I change the reservoir.

Idhdb

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.