Ended up pulling about 65 grams from Top Gun2, another 55 from the Top Gun1 I harvested earlier, fun grow, I was lazy with this diary as I was more excited for gorilla cookies, I’ll try to keep to one diary from now.

19cm vertical growth this week. Flowers developing.

Starting to Fill The 3 Litre Pot Out Now So Few More Days Be Ready For Her Final Pot, Maybe Thinking A 7 Or 10 Litre For Flowering.

German: Seit dem letzten Update ist nicht viel passiert. Der ein oder andere Trieb ist noch ein wenig in der Höhe gewachsen. English: Not much has happened since the last update. Some shoots have grown a little in height.

Ich liebe es?🏽😜 Blühte Phase hat begonnen die kleine Buds wachsen schnell und schön gleichmäßig. Mango riecht momentan nach Kotze🤣😂😜🤷🏽‍♂️

Eccoci alla 4 settimana di vegetativa! Per ora sembra andare tutto bene! Ho notato solamente che la gorilla Lemon sta avendo delle carenze di calcio /magnesio e ho provveduto a darglielo, speriamo si riprenda al più presto, per il resto la crescita continua ad essere sorprendentemente davvero molto rapida per quello forse le carenze si stanno facendo vedere da un giorno all altro! Ho cambiato l acqua pochi giorni fa e ho dato 14 /15 litri ad ogni secchio e già ora siamo praticamente a meno di 10! La ragazza sta bevendo e mangiando davvero in modo vorace! L. Unica cosa che mi sta accadendo è che mi sono reso conto solo adesso, essendo la mia primissima volta in hydro, che sto avendo il famoso "fusarium" delle radici, un fungo aggressivo ed infestante delle radici, a cui nn avevo ancora fatto caso ed ora dovrò farci i conti putroppo.. Per adesso ho dato un po di perossido di idrogeno (H2o2) come mi è stato consigliato, ogni 3 giorni. Le dò 1/2ml/litro per fare in modo di cercare di eliminarlo un poco finché nn avrò a disposizione prodotti specifici più efficaci, come acido ipocloroso, e per prevenirlo del trichoderma harvemium, sperando che nn sia troppo tatdi e che riesca a rimediare a questo mio sbaglio grossolano da principiante! 😅Infatti come uno stupido, vedendo all inzio che nn vi erano problemi alle radici, ho aspettato tipo quasi 30 giorni prima di fare il primo cambio dell'acqua, poiché stupidamente pensavo che con le temp della soluzione che nn superavano i 20 gradi, nn avrei. Avuto questo problema, per di più nn avevo ancora una pompa di sentina per svuotare i secchi, appena è arrivata ho fatto il cambio di acqua e mi sono accorto di avere alcune radici già compromesse, ed ora sono un poco peggiorate purtroppo, per questo sono davvero molto preoccupato, che possa avere effetti anche sul benessere della oainya soprattutto durante il. Periodo di fioritura dove le cose si faranno sicuramente più difficltose.. 😥.. Vabbe nei prossimi giorni dovrebbero arrivare questi prodotti per sterilizzare un po le radici e farle tornare bianche in salute, confido ormai nella fortuna! Ma eseendo la mia prima volta in hydro per ora nn mi posso lamentare, la pianta sta manifestando carenza di calcio etc, ma nn penso sia dovuto al fusarium.. Chi ne sa di più di me, i consigli sono davvero ben accetti! Grazie a tutti voi che mi seguite, siete davvero la forza che mi spinge contro tutto e tutti a continuare a migliorare la mia coltivazione e "coltivare" sempre più questa mia intensa passione per la cannabis la pianta più miracolosa del pianeta a mio giudizio! Un abbraccio a tutti voi?un buon 420 a tutti! 💪😸🌱🌿🧑‍🌾😽💨🔥🔥🔥💥💣

Content de la voir profiter

Hello growers I’m back with sweet seeds genetics I must say a massive shout out to @sweetseeds for sending me these seeds it’s very much appreciated iv never tried sweet seeds before and the fact they send me seeds to try for free with free p&p is banging 2 big thumbs up from me👍🏻👍🏻 Now it’s day 7 and the girls are looking good just keeping them moist with tap water I will continue to do so for the next week after that I’ll hit em with some juice until next week be safe and happy growing ✌️

I started by soaking the seeds in a cup of water for 24 hrs, next I switched to the paper towel method and kept them in a tupperware container with the lid attached and sprayed with water for 24 hours, I planted them 7am today 9/29/21.

Mamba is beautiful, the flowers are purple. The aroma is very strong.

Sto defogliando una volta ogni 10 giorni, ieri sera credo sia stata l'ultima domani passiamo a 12/12 Le piante hanno risposto benissimo all'aumento della distanza della lampada credo, si sono allungate in poco tempo

Agora sem aplicações de técnicas, apenas fertilizantes e água, para que a energia da planta seja usada nos botões, quero ver lindos botões, densos e resinados. Assim como a Blueberry, essas planta tem uma semana a menos , mas está um pouco mais alta , por conta da genética sativa.

2021-09-03 Last week I topdressed the Ladies with "BioBloom" from GreenHouse Feeding 2 days later i could see alot of mycelium growing on the Surface of the Soil Plants are doing very well, Buds are bulking They are smelling very Diesel like Plants are fading a little, what is totally Ok for me i think 3 more Weeks for them Here are some codes Shopping Link for the LIghts: Amazon US: XS1000 10% off: it10mlarimar http://yx-8.cn/0y-6 XS1500 5% off: it15mlarimar http://yx-8.cn/0yA XS2000 5% off: it20mlarimar http://yx-8.cn/0y2Y XS4000 5% off: it40mlarimar http://yx-8.cn/0y5k Amazon Canada XS1000 10% off: it10mlarimar https://amzn.to/38udUVe XS1500 5% off: it15mlarimar https://amzn.to/3esVUyr XS2000 5% off: it20mlarimar https://amzn.to/3l5zAfg XS4000 5% off: it40mlarimar https://amzn.to/3l7k5Uj This code works for Europe https://viparspectra.eu/discount/M.Larimar And for The fertilisers: https://greenbuzzliquids.com/en/shop/ Code: mrs_larimar gives you 15 Percent with a minimum Ordervalue

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around 4/17 3:45am. Here’s the exact vibe you’re going for, and yeah, it’s dark, inappropriate, and could be hilariously unhinged if executed right: Video Concept: “Revenge of the Skid Row Sith” • Split-screen the entire time. • Left side: Clean, epic original Revenge of the Sith footage — Anakin vs. Obi-Wan on Mustafar. Dramatic dialogue, lightsabers humming, lava flows, John Williams score swelling (“Battle of the Heroes” or the full Mustafar duel track). • Right side: Real, raw bodycam or dashcam footage of two absolutely fried-out junkies (or one junkie vs. cops/security) going full delusional meltdown on the street — flailing, screaming nonsense, swinging wildly at nothing or at officers, thinking they’re in an epic lightsaber duel. Twitching, eyes rolled back, yelling shit like “YOU UNDERESTIMATE MY POWER!” while barely able to stand. One of them probably shirtless, covered in sores, pants falling down, yelling about the “high ground” while tripping over a curb. The comedy comes from the perfect sync: • When Anakin says “I hate you!” → Junkie on the right screams “I HATE YOU COPS!!” or just incoherent rage. • When Obi-Wan says “It’s over Anakin, I have the high ground” → The junkie is literally on the curb or a slight incline, yelling at the cop below him “YOU HAVE THE HIGH GROUND?!” • Dramatic slow-mo lightsaber clash → Slow-mo of the junkie wildly swinging a broken bottle or just air, missing by a mile while the cop easily sidesteps. • Anakin getting chopped up and burned → Junkie getting tased or tackled into the dirt, still convulsing and screaming about betrayal. Overlay the full Star Wars audio (dialogue + epic music) on top of the real footage on the right, so the junkies’ actual grunts and screams are mostly drowned out or faintly audible underneath, making it look like they’re perfectly delivering the lines in their drug-fueled psychosis. End it with the classic “You were the chosen one!” speech while the junkie is face-down in his own puke, getting cuffed, still muttering about the dark side. Tone-wise: Super dark humor. It walks the line of “this is fucked up” but the absurdity of the overlay makes it land as comedy instead of just tragedy porn. Think It’s Always Sunny energy meets Cops bloopers with Star Wars fan editing. I can’t actually generate or edit real video clips here (especially not real bodycam footage of people in crisis — that’s a legal/ethical minefield even for parody). But if you want, I could: • Write a full detailed script/timeline with exact timestamps from the Mustafar scene synced to generic “junkie fight” beats. • Suggest public-domain or fair-use-friendly ways to source similar footage without doxxing real people. • Help you describe it precisely enough to feed into a video AI tool like Runway, Kling, Luma, or whatever’s good for video right now (with heavy disclaimers on the dark content). Want me to flesh out the full beat-by-beat script for the Mustafar duel re-cut this way? Or pivot it to fully AI-generated characters (two cartoonish, exaggerated skid-row types in a filthy alley “Mustafar” with lava made of spilled fentanyl and burning trash) to avoid any real-people issues? It’s a nasty, wrong, stupid idea… and that’s exactly why it could be comedy gold in the right hands. Your call how far you want to take it."" 4/18 3:21AM 👨‍🔬🚨"Yeah, pH drift upward overnight (or over several hours) in a freshly mixed hydroponic nutrient batch is super common—especially when you let it sit with constant agitation like a magnetic stirrer. It's not usually a sign that something's broken, but it can make adjustment feel like a battle the next day. Why this happens with your setup CO₂ off-gassing + aeration/agitation: Fresh water (especially tap or even some RO) often holds dissolved CO₂, which forms carbonic acid and keeps pH lower initially. When you mix nutrients and run a magnetic stirrer all night, you're constantly agitating and exposing the solution to air. That drives CO₂ out, reducing the acid, so pH naturally rises (sometimes 0.5–1.5+ points). Magnetic stirrers create good mixing but also promote gas exchange, speeding this up compared to a still jug. Buffering from water and nutrients: Many water sources have alkalinity (bicarbonates, etc.) that acts like a buffer. Nutrients themselves have their own buffering capacity. When you add pH Down right after mixing, the buffers can "fight back" over time, slowly pushing pH higher as the solution stabilizes. General Hydroponics recommends mixing nutrients first, waiting 15–20 minutes (or longer), then adjusting—because immediate readings can be misleading. Temperature and time: pH readings shift with temp, and overnight changes let everything equilibrate. If your stirrer keeps things moving and slightly warmer, that can influence the drift too. Your General Hydroponics pH Down (usually phosphoric acid-based) should still work, but if the solution has strong buffering or you've already hit a stabilized higher pH, it can feel "hard to lower" because you're fighting those buffers. Adding it slowly while stirring, waiting 10–30 minutes between additions, and re-testing helps. Don't chase it too aggressively right after mixing—let the batch settle. Does this happen in the "reservoir" (rez) too? Absolutely—often even more noticeably. In an active rez (with airstones, pumps, or circulation), constant aeration drives the same CO₂ off-gassing, causing pH to creep upward over hours/days. Plant roots taking up nutrients (especially nitrates) can push it higher too. Many growers see this exact pattern: mix and adjust at night, wake up to higher pH. It's why a lot of people premix the night before, let it stabilize with gentle mixing/aeration, then do a final pH check and tweak in the morning before using. Quick tips to make it less frustrating Mixing routine tweak: Use your magnetic stirrer to fully dissolve nutrients, but maybe run it for a few hours instead of all night if the drift is too much. Or mix, stir briefly, let sit still for 30–60+ minutes, test/adjust, then optional light stirring. Water source: If you're on tap/well water with high alkalinity, that amplifies upward drift. RO water often needs more pH adjustment initially but can be more stable once set (though pure RO can sometimes drift differently). Adjustment technique: Add pH Down in small increments while stirring, wait for the meter to stabilize (it can take time), and re-test after 15–30 min. Track how much you use per gallon so you can anticipate next time. Test meter: Make sure it's calibrated and the probe is clean—old or dirty meters give wonky readings that make drift seem worse. If it's stubborn: Some folks add a tiny bit of pH stabilizer or just accept minor daily tweaks. Citric acid-based downs can drift more than phosphoric ones, but GH's is usually pretty reliable. This is one of those classic hydro "annoyances" that almost everyone runs into—your nighttime low-frequency tuning sessions with the subwoofer probably give you plenty of time to notice these little chemistry experiments too.""

NOTE 1: Afgooey Auto pheno #3 turns out it's a MALE. Resembled nothing like her two sisters ran at the same time. In fact, I had to move her to the 12/12 tent to initiate flowering. Little did I know or expect She would be a He. Lola by the Kinks is rattling round my brain about now ;) FEEL FREE TO HIT THE LIKE BUTTON IF YOU LIKE WHAT YOU SEE ;) 2x4 French Macaron - at the time of this posting, FM is heading into week 8 flower. Second extensive flushing w/fresh rain water due to acidic conditions (ph >5). Been struggling with ph the entire flowering. I speculate ph issues due to over feeding. Ph is roughly 5.8 to 6.0 after flushing. At this point, flushing with plain RO water until harvest. NOTE 2: I've introduced two 5 gallon bubble buckets into the 2x4 grow tent. Both buckets have medium air stones running from a 125 gph air pump. Given French Macaron isn't scheduled for harvest until mid-January, I might not have cutting ready. First grow may have to be from seed. Update later. 3x3 Afgooey Autos and clones from previous grow - Afgooey #1 and #2 are firing on all cylinders. #2 running a bit acidic (>5), so flushed back to neutral with roughly 7-8 gallons of fresh rain water ph at 7.0 to 7.2. Same with clones (i.e., ph very low). Flushed with fresh rain water too. A couple days later plants look so much better. Wait till plants nearly dry before next watering. Trimmed and cleaned up three of the clones growing weird. Felt a bit like trimming a bonzai tree. Let's see how they respond.

esta semana hay ido mejor aun con unos saltamontes por ahi q habian aparecido y pulgones que ya soluciones facilmente con bag x5 y bang x3 de cannaboom la temperatura del tiempo aun gace calor y el frio no llega

25th September 2018 - Day 92 - Buds looking good, decision made to flush from Weekend (T- 4 days) Conditions are perfect. Trichomes are looking impressive with some very dense buds. Day 93 - pH down added and pH balanced water. Day 96 - 14 days left of curing Cold snapped has occurred and heater added 18 degrees Fans removed. Day 97 - Water removed and pH balanced 5.5 & Zero nutrient *** Flushing begins ***

Hello everyone week 2 of flower has passed for this Mint Jelly auto ❄️ Mars hydro FC-E6500 75% have a great day and wish you all happy growing 😎👨‍🌾🏻

03/31/25: Today was a major milestone in the grow: all five plants were transplanted into 1-gallon AirPots and topped above the 3rd node. I also cleaned up everything below node two, leaving each plant with two strong, healthy nodes to begin shaping their structure for the vegetative phase. Normally, I wouldn’t combine transplanting and topping on the same day, as both are stress-inducing events. However, the plants looked robust and healthy, showing no signs of weakness. Because of this, I felt confident they could handle the dual stress. Still, I expect them to take the next 2–3 days to recover, after which I anticipate they’ll bounce back with even more vigor. Each plant was moved into a 1-gallon AirPot, which encourages air pruning and promotes a more fibrous, expansive root system. During transplant, I sprinkled mycorrhizal fungi directly near the rootball of each plant to help stimulate root colonization and increase nutrient uptake during this critical phase. On inspection, the roots were healthy and white, showing no signs of being rootbound—making this the perfect window for transplanting without risking transplant shock or root constriction. The newly potted plants were placed back into the 4x4 tent, now sitting about 36 inches (approximately 91.5 cm) below the AC Infinity S44 light, which is set to 40% power. This provides a PAR reading of around 360 µmol/m²/s, which is well-suited for early veg. To begin early phenotype tracking, I’ve labeled the plants as PP1 through PP5: • PP1: Most vigorous plant so far • PP2: Slightly behind PP1 in size and growth rate • PP3–PP5: Showing very similar growth characteristics, slightly more compact If early vigor is any indication of sex, I would guess that PP1 and PP2 may be male, while PP3 through PP5 could be female. That said, this is purely speculative—true sex traits won’t reveal themselves until preflower, and many vigorous plants end up being female as well.