Pues sigue expulsando resina esta preciosa cepa! Ha bajado bastante la temperatura en esta ultima semana y he tenido que estar poniendole un calentador algunas horas para controlar la temperatura, de todas formas lleva muy buen ritmo!

Esta semana fue solamente de flush 🚿 en esta ocasión decidí usar florakleen para ver con cual obtengo mejor resultado si con este o con flawless finish, lo hice así, primero hice un lavado con pura agua con ph de 6.2 lo hice desde el ultimo día de la semana anterior, fue lavado doble, uno en cuanto se encendio la luz y otro justo antes de apagarse, luego empezando esta semana regué dos dias usando el florakleen y ph de 6.2, el tercer día no regué y al final de ese día le di corte ✂️ y la colgué, actualmente ya la tengo curando, la tuve 10 días secándose con una humedad de entre 50 y 60% para un secado lento.

Day 56: Nothing special this week other then I found out another reason for the stretching of the plants. I don't know where i was of what i was doing but suddenly it came into my mind. Well normaly i use seperate veg and flower basic nutrients. This time, I used a new basic nutrient i never used before. This basic nutrient has veg and flower nutrients for the whole cycle. So the growth of the plants has been stimulating for to long. This is fun when you grow huge plants for a long time, not if you plan to only veg for 3-4 weeks, 1-2 weeks preflower with maybe 6 to 9 weeks of flowering.

Beginning of week.. I went up a tad on the nutes today.. And went down on the light power last week.. It was about 65% - 70% power which was quite a bit, I guess.. I put it at 50% power and she is finally starting to get some height to her.. I noticed more pistils toward the very top. I really hope she doesn't start flowering too soon.. I'd like to get some LST done on her. But she is happy and healthy! Next day... Even more pistils! Its been awhile since I grew an auto.. So I kinda forgot how early pistils can start poppin out but still be in veg (preflower). I just really wanna turn this girl into a flat bush! 10 mins later... Ok.. So looking back at my other autos.. This is pretty typical for them to start showing preflower this early.. She should still have 2 or 3 more weeks of veg with preflower! Mid week.. This is a day early.. But close enough.. 3rd week and growth is beginning to explode! The very first node's branches aren't really doing much.. Plus they are damn near to the ground.. I'm wondering if I should just remove them.. Maybe not yet.. But soon.. Or when I finally apply some LST. She is doing great!... No deficiencies.. No excesses.. Autoflowers are a trip! Can't wait to see what she looks like in another 7 days! I wanna try to do the entire grow without removing much, if anything.. But if this bottom branch doesnt start doing something.. I'm gonna have to remove it.. Its just bothering me way too much lol. Actually mid week.. SoI have been noticing a little bit of clawing and darkness.. BUT ONLY on the new growth.. As the leaves get older they seem to straighten out and lighten up a bit.. But I'm pretty sure it's nitrogen toxicity.. So I went down from .66mL/L to .33mL/L.. I use 3L to water daily.. So basically 1mL per feeding of all the base nutrients and the CalMag.. The Floralicious Plus has a bit of nitrogen too so I went down a tad on that as well. I read someone else's grow that says these girls are a bit sensitive to nitrogen.. So that's where I'm at now. Flushed this morning, and now for a small feed tomorrow morning. Will be updating with pics at the end of this week. Later that night.. Went ahead and flushed with just 2L of pH'd water.. Going in - pH: 6.3 PPM: 240.. Runoff - pH: 6.1 PPM: 640... So the PPM is still a bit high, but during the feed tomorrow, it should go down some still.. I should have ALOT of runoff tomorrow. I had the same amount I normally do when I use 3L just from these 2L.. Just cuz its 12 hours early.. The medium was still nice and moist.. And will still be in the AM for the next fertigation. Next day... Waking up this morning, I found that the oldest set of leaves that had been clawed cleared up.. For the most part.. Still dark asf.. But not as much clawing..the newest set were still clawed tho.. Which is understandable.. I made 3L of nutes.. Only used 2L in the AM.. Going in pH: 6.3.. PPM: 420... Runoff pH: 6.2.. PPM: 480... Not bad.. And I still have 1L left over which I am going to have to give her later today.. And will update with the runoff info also. Some say not to worry about the runoff pH.. But I think that is only because when people see it really low, they tend to give make the nutes waaay too high in order to combat the low runoff.. I just make my nutes 6.5 till ai see the runoff coming out at the area that works best for my grows.. Which is 6.2 or 6.3.. Let me explain why I use 6.2 to 6.3... My first 2 grows in coco I was using 5.8 to 6.0.. It worked well in veg but it was only during the transition and beginning of flower that I had calcium defeciency.. GWE website said that in hydroponics/coco that calcium is best absorbed at 6.3 or so.. So ever since I've just ran my girls at 6.2 or 6.3.. No lower, no higher.. The entire grow.. And haven't had any issues with deficiencies since! So that is MY sweet spot.. I may let it drift to 6.1 or 6.4.. But I try not to, for the most part. Later that night... I went ahead and did 1L of pH'd water first.. Then did the 1L of nutrient water.. Runoff came out at 420 PPM 6.2 pH... Nice... Also, I went ahead and ponytailed the top and pulled some of the longer branches on top of the fan leaves.. I'm only going to keep it ponytailed for the rest of the day (6 hours left of lights on).. Never tried this before, but with these super fat indica leaves blocking literally every branch.. I figured it couldn't hurt to give it a try. I may do it for another 6 hours tomorrow.. But I havent thought that far into it yet. I just want her and her branches to be long enough to begin some LST by the beginning of next week.. And already more than halfway through this week. Happy with the way things are going, for the most part... Almost end of week.. Ponytailed her again for another 6 hours this morning.. Just trying to give the side branches a little head start before the LST next week. End of week.. Welp.. I couldn't wait one more day to apply some LST.. I went ahead and did it today.. I also removed the bottom node, leaves and branches.. They were weak branches and I figured I could get them to take root and breed some seeds with them using Collidail Silver method! I really like how these branches have grown on this girl! It's like they already grew into a lollipop!!! Still only using the light at 50% power.. Which is helping keep the temps down a bit... Niceeee... I haven't defoliated anything (except the bottom node due to very weak branches and horrible looking leaves.. Which I'm guessing is because they were so low, possibly getting nutrient water on them during watering) but again, cloning those to breed with! She has completely exploded this week! Very happy with this girl! On to the next week!!!...

Week 6 december - 12 december 9 december - I plucked some yellow leaves on the buttom of the plant, just the ones that come off easily.. She is a Fighter

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

Creo que hay un problema en las raices, las hojas tienen clorosis y se caen, aplico cannaflush hace 2 días y cuando seque un poco añadiré rootbastic a ver si noto mejoría. Algunas plantas ya casi están a otras les queda un poco

Week 14 (week 7 flower) Light settings 12/12 on at 9.00am off at 9.00pm Viparspectra Light power= 63% 150w VPD aim 1.0-1.6 DLI aim 35-40 Extractor settings temperature 24c with 0c steps Humidity 45% with 0% steps Max speed 10 Min speed 4 Monday 19/6/23 Day 92 (day 46 flower) Been warm again but a good few thunderstorms. VPD has been better. Tuesday 20/6/23 Day 93 (day 47 flower) Moved light more over the test strains at the front. #1 DLI=34.5 Wednesday 21/6/23 Day 94 (day 48 flower) 💧 Starts Autofeed at 10.00am-12.05pm, 8 runs (5,5,10,10,15,15,15,15 total 90 mins) 5 minute gaps. 12L 30 drops ph d Feed Ec=1.33 Ph=6.5 1.7L left Roughly 2L each Combined runoff 1.5L Ec=2.1ph=6.2💧 Defoliation. Thursday 22/6/23 Day 95 (day 49 flower) Friday 23/6/23 Day 96 (day 50 flower) Been less of a battle controlling VPD today. Saturday 24/6/23 Day 97 (day 51 flower) Adjust drippers. 💧 Starts Autofeed at 10.00am-12.05pm, 8 runs (5,5,10,10,15,15,15,15 total 90 mins) 5 minute gaps. 13L 35 drops ph d Feed Ec=1.31 Ph=6.2/6.5 1.25L left Roughly 2.35L each Combined runoff 3L Ec=2.4 ph=6.0💧 Sunday 25/6/23 Day 98 (day 52 flower) #1 Height= 65CM Dist= 38CM DLI=34.0 The weather has caused another tough week for controlling environment. The grow is showing signs of heat stress but nothing to worry about. This tester is coming along nice. Becoming very frosty, I'm not sure how much more the flowers will bulk out but she is looking nice.

In der fünften Blütewoche zeigt sich der Erfolg des Scroggens deutlich. Die Pflanze hat das Netz vollständig durchwachsen, und die Blüten verteilen sich gleichmäßig über die gesamte Fläche. Um die Stabilität der immer schwerer werdenden Blüten sicherzustellen, habe ich zusätzliche Netze aufgehängt. Außerdem habe ich die Beleuchtung von 400 Watt auf 720 Watt erhöht, um den Blüten noch mehr Energie zuzuführen und das Wachstum weiter zu fördern. Die Ergebnisse sind bereits sichtbar, mit dichten und kraftvollen Blütenständen, die sich vielversprechend entwickeln.

*Week 6 of flowering 10/01* Critical +2.0 - Apple Fritter Both plants are nearing harvest and have maxed out at a height of 48 inches. Buds have developed heavy trichomes and are giving off a bright and vibrant smell. 85% of both plants have grown in their orange hairs and have a bright green and orange tint, Today will be the last nutrient feed, I will be using the "Lotus Carboflush" starting tomorrow (10/02) to remove the salt build up until harvest which will be next week (10/09) * 10/8 - Cut down* Both are heavy on top - Covered in trichomes - smells deep (Citrus) Dry trimming in two weeks - aiming for 14 day cure. *Day 2 Dry Hang Video uploaded 10/09* *10/15 - Harvest should be completed by the end of this week - 10/20*

Teniendo el sustrato preparado con antelación un par de días antes.. nos animamos a germinar, tengo una tremenda ilusión con esta pequeña, me hace muy feliz verla crecer!🌱 Ojalá todo salga bien y pueda acompañarla hasta el final en este precioso viaje 👽❤️🌱 Nos hemos marcado tres objetivos en este cultivo: 1-hacer un cultivo seguro y no ser detectados👮‍♂️🥇 2-conseguir una cosecha en menos de 2 meses con éxito 🏇🥈 3-gastar la mínima cantidad de recursos posible con el máximo rendimiento posible🤑🌍⚡🥉

Day 57 the plant has been growing healthy and fine but she is a slow grower . I know that most of the growers in this platform and elsewhere do defoliate and trim down all the lower branches of the plant so that the plant can concentrate all its energy into the higher bigger and better buds .and I do not do this because I drive the plants very hard with nutrients and those lower branches with small buds always give me the first sign of anything going wrong with her and that's why I leave them as a buffer zone to protect the bigger buds and that way I can push her as hard as I want. not much to mention about her thank you for reading I will continue to update have a happy grow

COMMENTED BY MadeInGermany MadeInGermany 5 minutes ago Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 49 since time change to 12/12 h. Hey everyone :-). We are slowly getting closer to the last few weeks :-) There are still 2-3 weeks and The buds develop very well towards the end :-). It is slowly starting to use up its nutrients. This week it was poured 3 times with 1 l each time. Everything was cleaned and checked. Have fun with the update. Stay healthy 👍 You can buy this Strain at : www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Bio Bizz Coco ☝️🏼 Nutrients : Green House Seeds Company Powder Feeding Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8

She is a little hungry going to try to give her some Cal mag buds are forming nicely stacking is on point nice dense snugs🔥

Week 8 - second week of flower One plant is much smaller - still not confident on sex of any of them ... maybe that small one is a male - I’m guessing they’re all female tho. Either way i may need to slaughter that little guy - the other plants are just overtaking the tent - might not be worth keeping that little one in there. Update 6/5/19 - I’ll take some updated pics tomorrow - I’m 95% sure I have FOUR out of four female plants. Just picked up some yucca to try - and I got some more led hangers so maybe I’ll upgrade the lights today - the rapidLED far red flower initiator isn’t coming until Wednesday unfortunately but I have two more SolStix I could add. Update 6/5/19 - far red flower initiator and the two (now 4) solstix are installed - I need to make a simple aluminum frame - maybe this weekend Picked up some 29% H202 to clean the rez tank and pumps and filter etc (not to put in the nutes for the plants tho!) Got a better air pump and airstone for the rez. New Vivosun oscillating fan - wtf!? Made for grow tents but can’t turn without stopping on the sides of the tent!? - I emailed them maybe it’s defective.

Week 5 Day 1 No issues after topping and transplant. Looks happy and growing. Need to start dehumidifier as temperatures start to creep up In here and humidity hitting higher and higher 🤘 Week 5 Day 6 Every day getting more and more bushy. One more week and she’s going into second tent and starting flower 🌹 😍

She is coming along. Put under 12/12 five days ago. Should be able to start a little training this week. She is at the fourth node now and 4 inches tall. Hoping she flips soon as I want her to stay very short. Watering has been very frequent and small without giving her wet feet.

Hey guys, hope all is well ! Nothing much going on except the fact I have to break ice to get my water now lol . I’m just letting them try to find themselves a little on their own this week. I find one of the biggest advantages of indoor growing could also become a problem is that you spend way to much time staring through the window then opening it back up and playing with stuff !!!

Came home from vacation to gorgeous ladies and their light fragrances. More to follow soon.