The grow went amazing started off what was supposed to be a auto GSC strain but didn’t auto flower which is no issue at all so went ahead an let her veg out an get the lst done that i wanted done on her she was showing pistils by week 8 veg letting me know she wanted to flower but some areas had a bit of catching up to do which turned out amazing. Got almost all the branches the same size to produce equivalent bud sizes throughout the whole canopy. During flower stage 2 weeks in started giving her a Pk boost of incredible bulk 1/2tsb per gallon. An did the GSC so good for flower stage she bulk up nice an the trichomes came in heavy. Total wet weight came in at 2.5lb stump was 1.5in circumference. I will update with finish photos an how the smoke was after cure. GSC currently being cured with love 63% Rh at 70 degrees temp. Thank you viewing an happy growing everyone!

Hello Growers and Tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 A lot to talk about this week.. Got my lights installed and oh my have they grown. Royal Gorilla has taken a major growth spirt this week, new growth everywhere and getting taller. I spread her out a bit doing some LST. She took it great and ket growing. Amazed with how these lights are working for them. Most likely will do some defoliation next week to clear some space, more light penetration and have the main colas grow. Happy with how this girl bounced back, she had time to recover when they were all under the 150W CFL... and now she's at an even height with the others. Watering every other day.. Hope your week goes as great or better than mine, have a good one growers!

This week went by quickly. They're doin their Pre-Flower stretch and getting big quickly!! I added my Pre-Flower mix to them this week. My Nutrient Pre-Flower Mix consists of H20, Coconut, Bananas, Pineapple, Sweet Potatoes, Kelp, Alfalfa Meal, All Organic Non-Pasturized Whole Milk, Epsom Salts, Black Strap Molasses, and L.A.B. or Lactic Acid Bacteria. First, I boiled the coconut, pineapple, sweet potatoes, the bananas, and left the skins on as well except the coconut of course! That I had to split in half and make sure to keep the water inside to add to the boil. After boiling everything I then let it cool and then added it to a blender to blend little by little. After blending I left separate and placed into the fridge. Then I took 1 Tbsp of Alfalfa Meal and 2 Tbsp of Kelp, 500mL of the milk, 2 Tbsp of Epsom Salts, and mixed them in a 750 mL bottle. Then I took 1L of the mix and added 2 Tbsp of L.A.B. and 2 Tbsp of Black Strap Molasses and then shook the bottle well! Then I took the 750mL bottle and the 1L bottle and fed that to the plants adding 250 mL of pH H2O to the plant as well to flush the ingredients all into the plant with the H20. I wanted to also note that I choose to slowly defoliate so that the plant doesn't go into shock and also fan leaves collect light in all spectrums so taking too many off at a time could hurt or slow the growth of your plant! The amount of light your plant takes in daily is called DLI or Daily Light Index. Overall, they're really growing and have a ton of us sites developing!

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

Will post dry weights & more comments soon! Sorry for the lack of updates but Thanks for following & happy growing friends!✌️🏼🙏🏼🌱

Moving along into flower nicely, spent a day and change inside hiding from the rain and wind from the hurricane remnant. Back outside now.

Just water from here on out .. she is super frosty ... the yield will not be the most, but I think the quality will be top notch.. shout out to the homie @Grow4releaf..God bless 🙌 and happy growing ✌️

Day 36: "Hey everyone! Just a quick update: I removed a few more leaves here and there and did one last round of LST (low stress training). 🌿 The plants are looking great, and I'm going to let them recover now before sending them into the flowering stage. I'm really excited to see them start blooming in 2-3 weeks! Also, a quick update on our temperature issue: today, the temperature stayed below 26.8°C, which is great news! However, we still need to find a solution to keep the humidity levels up. Our 360 m³/h exhaust system isn't able to maintain the required humidity level. I've calculated that we need a humidifier that can evaporate 1800ml/h to maintain 60-70% humidity, which would help manage the temperature better. Does anyone have tips for a good humidifier or other methods to control the humidity and temperature? Any advice would be greatly appreciated! Day 37: Hey everyone! Tomorrow, we're planning to buy some Cal-Mag because we suspect the yellowing leaves might be due to a calcium-magnesium deficiency. We're also going to get a pH test kit to make sure everything is balanced properly. Do you think this is a good idea? Any tips or suggestions would be greatly appreciated! Day 38: Hey everyone! Quick update: it turns out the yellowing leaves were due to a nitrogen deficiency. We increased the fertilizer dosage today, so the plants should start looking better in 4 to 5 days. 🌿 Thanks for all the support and suggestions Day 39: Hey everyone! Another quick update: after increasing the fertilizer yesterday to address the nitrogen deficiency, it should take about 4 to 5 days for the yellow leaves to turn green again. 🌿 We're already seeing improvements! The plants have grown significantly and are developing a dense canopy once more. It's great to see them bouncing back so quickly! Day 41: "Hey everyone! Quick update: we've removed the bands we were using for LST (low stress training) and are now letting the plants grow freely. 🌿 We plan to keep them in the vegetative phase for about one more week before transitioning them to the flowering phase. Excited to see how they continue to develop!"

📅 D85- 26/01 📜 Only fresh water from now on. She's not yet ready - 3-4 days more I think. ✍️ 0.1 EC ♒ 6 pH 🌊 10 L 📏 95 cm 📅 D90- 29/01 📜 Not yet Ready ✍️ 0.1 EC ♒ 6 pH 🌊 10 L 📏 95 cm

I think they like the change

I transplant in 11 liter pot and put the lady under the lumatek attis 300w for flowering. She's awesome, let's start the flowering stretch.

Hey friends, end of week 13 from seed. A big incident happened this week, I had 3 clones growing in the same tent. I had placed them on some cardboard boxes so they could be closer to the light. Woke up one morning and saw all 3 plants on the floor, pots fell on plant #1 and destroyed 2 stems on the bottom, they had some small buds formed already. I chopped the 2 stems and hanged them up for drying, I left all the leaves on, did no trimming. After 3 days, buds were dry, smelled like plant and bud combined, not too pleasant. I couldn't resist to try it out, so I crushed some on my vape. It kicked in as a sativa, eyes got weak, head high, it slowly starts to give you a appetite and after 40 mins, you want to sleep, overall it felt like a sativa - Hybrid. The taste at the beginning was not very pleasant I guess because these buds were not ready for harvest yet and I did not flush them. Will need to do more research on harvesting / drying and curing. 1- how dry to should the buds be before curing? 2- is it better to trim leaves before or after drying for a better taste? Noticed some amber on trichomes Will begin to flush in week 14 Smell is stronger Leaves are slowly fading to a different color Will keep you guys posted!

Keeps going. Etsy seeds coming through. I think soon in the grow a cal mag problem comes up. Chime in when you see it.

What's up growmies, We reached the final stages...almost ready to cut. Its probably going to take an extra week compared to the Strawberry Cola. But the productions is maybe 30% more on this one. Veery long staked colas. Starting at the bottom of the plant all the way to the top. Sweet and fruity smells and drinking almost double the 💧 water compared to her neighbour. One more week of nutes and then another week with plain water is what she'll have probably. The root is a giant, white ball filling half the bucket space. I've used great white which from my experience is very very good. Doesn't perform miracles like Jesus though. The water temps in the reservoir needs to be in the correct range or else it almost always will develop phytium. If you can't keep the water cool ( 17/21ºC) you're better off with a steril system using H2O2. See you guys next week. Good grows

So here we are day 24 in bloom! My new girls have started to climb above this beauty now and are off their raises and I feel I may have to start raising this one if they continue to stretch any more! As I have to keep the light at 18” running through my tests of the light! Because I did 12” last grow and ran into light intensity problems and as of yet am I to experience any problems and I hope I literally make it through without any 😊 she’s all organic too which is a treat when it comes to flushing! I do flush for 2 weeks when the pistols turn 60-70% orange! Seems to be the perfect time I’ve been used to and worked! Then I look at the trichromes for perfect harvest! Just know she smells so good already just open the tent and smell her sweet grapefruit terps coming through strong! And her flowers and going to be huge as I’m not yet half way through and look at the growth! I do prefer growing organic and am transitioning towards growing fully organic! All I know is this Zamnesia stuff is incredible! Along side bionova! It’s simple and productive!

Apologies that this took me so long to update! This harvest was probably my second favorite, after my Choc Mint OG. Even tho the yeild was low due to only having 1 plant after a season on downs.

Leaves are changing, and doing out. Trichomes are starting to get cloudy, as well as the hairs turning orange and curling.

This week I defoliated the Honey Melon Haze and the O.G. Kush. It's the first time I try this. The broken stem of the O.G. Kush seems to grow pretty well so far. Nice! Humidity goes from 50-55% during the day to 80% after the night without dehumidifier (too noisy during the night). I poor 2l of tap water during each watering for the 26l pots and 1l for the 10l pot. The two Mandarin Punch Auto grew a lot this week, the stretch has surely started! They are now even taller then the Honey Melon Haze and the O.G. Kush. Plants heights at the end of the week: Honey Melon Haze : 50cm O.G. Kush : 44cm Mandarin Punch #1 : 54cm Mandarin Punch #2 : 52cm Tomorrow, I will switch to 12h of light to start the stretch of the two photoperiod plants.