The Grow Awards 2026 🏆
Likes
Comments
Share
09/07 - Reveg still in process - Mother plant in recover from clone clipping - unhealthy clones disposed - cutting new clones this week - Myco and Superthrive feed increased - Net dropped an LST.
Likes
41
Share
@Reyden
Follow
Le luci sono state impostate a 12/12 già da una settimana quasi e per motivi di lavoro 🎚️🎛️🔊 ho dovuto lasciare 3 giorni le piante senza guardarle…non pensavo che avrebbero asciugato così, i vasi in tessuto fanno passare così tanta aria che non avevo calcolato questo..insomma sono tornato ed erano tutte flosce, tempo di bere ancora e qualche ora sono tornare belle splendenti come prima! Le piante non sono state praticamente toccate 😄🙌💥✨
Likes
18
Share
Finished spreading the plants out to a width I was comfortable with. Added the second netting at the end of this week.
Likes
10
Share
@Diegobike
Follow
Esta semana ha Sido súper buena para mí planta cada vez se ven más pistilos y la resina y su olor no dejan nada de que hablar. Simplemente son innumerables los terpenos que tiene esta planta a metros puedo olerla. Últimamente todos los días llueve con gran intensidad gracias a tanta humedad algunos cogollos presentaron botritis pero pude calmarla quitando los cogollos afectados y aplicándoles un poco de agua oxigenada. En resumen va de locos ya quiero probarla
Processing
Likes
10
Share
Plants are doing well, The 84" inch tent is a must if your not training or topping. I removed all the sacks that appeared last week and I haven't seen anymore show up so fingers cross, I check daily. Bigger tent also helps with heat control as the air has more room to rise. Hope you all like the pictures, I started to take videos as they provide more detail with less work.
Processing
Likes
26
Share
Esa familia , ya va quedando menos para cortar estas hermanitas skunk de Zambezaseeds, tienen algo de sobre fertilización de las últimas semanas pero llevamos solo agua 2 semanas. Ph regulado en 6,5 . Humedad por debajo del 40% , temperatura algo alta al trabajar con sodio pues en esta época sube vaya. Así que esto tenemos y las flores se ven bastante compactas. Nos vemos la semana que viene fumetillas.
Likes
10
Share
@WorldPeas
Follow
Gave her a haircut at the beginning of the week, buds are fattening up quick. Im seeing noticeable changes daily. Increased light on time by 3 hours to 23 hours on. Feed has changed with the addition of Cycos swell (2.5ml/L) and Supa Stiky (2ml/L) and removal of potash plus. All to aid in the development of the phattest buds possible 😁 End of Week: Noticed rust spots on some fan leaves ref grow question. Gave her a flush of PH'D water and Kleanse as it was time to anyway dialed the Bloom A + B back a little to 2ml/L. Let's see how she picks up. Just starting to notice frosting on some of the sugar leaves.
Likes
56
Share
Once again she passes my expectations, late to the show with trichome production. I'm surprised there is purple on the bud, maybe Purpinator does work. I thought I could see hints under the grow lights and thought my eyes were deceiving me, I was just being hopeful. But nah 2 of the 3(under the UV) have developed a beautiful tone of purple. I was never going to bother with a deep freeze but maybe the whole bud will change given conditions, that would be something, fingers crossed. 🤔 was a little skeptical that reducing temps humidity would change density, but it does, buds are solid something I've not been able to achieve before. Rule of thumb is never to surpass 60% RH in the flowering phase and try to progressively reduce it down to 40% in the last 2–3 weeks before harvest. The plant will react as it seeks to protect its flowers, responding by producing denser buds and a higher concentration of resin. Cannabis plants are sensitive to sudden temperature changes, especially in the flowering stage. Extreme heat or cold can impact bud density and overall yields. In nature as a defense mechanism from cold, the plant sensing sudden dips in temperature will attempt to remove the pockets of air within the bud, it achieves this by compacting itself in doing so to better protect itself from cold snaps which are normally indicators in nature that worse weather is on the way. Terpene levels are the highest just before the sun comes out. Ideally, you want as many terpenes present in your plants as possible when you harvest. Cannabis plants soak up the sun during the day and produce resin and other goodies at night. The plant is at its emptiest from "harvest undesirables," so to speak,k right before the lights come on. Freshly cut buds are greener than dried buds because they still contain loads of chlorophyll. However, when rushed through the drying process, the buds dry but retain some chlorophyll, and when you smoke it, you will taste it. Chlorophyll-filled buds are smokable, but they aren’t clean. Slow drying gives the buds enough time and favorable conditions to lose the chlorophyll and sugars, giving you a smoother smoke. How the plant disposes of the chlorophyll and sugars by a process of chemically breaking them down and attaching the decomposed matter once small enough to water molecules, which then evaporate back into the ether. Time must be given to the process to break down the chlorophyll and sugars. Think of it like optimizing the environment for decay. Plant growth and geographic distribution (where the plant can grow) are greatly affected by the environment. If any environmental factor is less than ideal, it limits a plant's growth and/or distribution. For example, only plants adapted to limited amounts of water can live in deserts. Either directly or indirectly, most plant problems are caused by environmental stress. In some cases, poor environmental conditions (e.g., too little water) damage a plant directly. In other cases, environmental stress weakens a plant and makes it more susceptible to disease or insect attack. Environmental factors that affect plant growth include light, temperature, water, humidity, and nutrition. It's important to understand how these factors affect plant growth and development. With a basic understanding of these factors, you may be able to manipulate plants to meet your needs, whether for increased leaf, flower, or fruit production. By recognizing the roles of these factors, you'll also be better able to diagnose plant problems caused by environmental stress. Water and humidity *Most growing plants contain about 90 percent water. Water plays many roles in plants. It is:* A primary component in photosynthesis and respiration Responsible for turgor pressure in cells (Like the air in an inflated balloon, water is responsible for the fullness and firmness of plant tissue. Turgor is needed to maintain cell shape and ensure cell growth.) A solvent for minerals and carbohydrates moving through the plant Responsible for cooling leaves as it evaporates from leaf tissue during transpiration A regulator of stomatal opening and closing, thus controlling transpiration and, to some degree, photosynthesis The source of pressure to move roots through the soil The medium in which most biochemical reactions take place Relative humidity is the ratio of water vapor in the air to the amount of water the air could hold at the current temperature and pressure. Warm air can hold more water vapor than cold air. Relative humidity (RH) is expressed by the following equation: RH = water in air ÷ water air could hold (at constant temperature and pressure) The relative humidity is given as a percent. For example, if a pound of air at 75°F could hold 4 grams of water vapor, and there are only 3 grams of water in the air, then the relative humidity (RH) is: 3 ÷ 4 = 0.75 = 75% Water vapor moves from an area of high relative humidity to one of low relative humidity. The greater the difference in humidity, the faster water moves. This factor is important because the rate of water movement directly affects a plant's transpiration rate. The relative humidity in the air spaces between leaf cells approaches 100 percent. When a stoma opens, water vapor inside the leaf rushes out into the surrounding air (Figure 2), and a bubble of high humidity forms around the stoma. By saturating this small area of air, the bubble reduces the difference in relative humidity between the air spaces within the leaf and the air adjacent to the leaf. As a result, transpiration slows down. If the wind blows the humidity bubble away, however, transpiration increases. Thus, transpiration usually is at its peak on hot, dry, windy days. On the other hand, transpiration generally is quite slow when temperatures are cool, humidity is high, and there is no wind. Hot, dry conditions generally occur during the summer, which partially explains why plants wilt quickly in the summer. If a constant supply of water is not available to be absorbed by the roots and moved to the leaves, turgor pressure is lost and leaves go limp. Plant Nutrition Plant nutrition often is confused with fertilization. Plant nutrition refers to a plant's need for and use of basic chemical elements. Fertilization is the term used when these materials are added to the environment around a plant. A lot must happen before a chemical element in a fertilizer can be used by a plant. Plants need 17 elements for normal growth. Three of them--carbon, hydrogen, and oxygen--are found in air and water. The rest are found in the soil. Six soil elements are called macronutrients because they are used in relatively large amounts by plants. They are nitrogen, potassium, magnesium, calcium, phosphorus, and sulfur. Eight other soil elements are used in much smaller amounts and are called micronutrients or trace elements. They are iron, zinc, molybdenum, manganese, boron, copper, cobalt, and chlorine. They make up less than 1% of total but are none the less vital. Most of the nutrients a plant needs are dissolved in water and then absorbed by its roots. In fact, 98 percent are absorbed from the soil-water solution, and only about 2 percent are actually extracted from soil particles. Fertilizers Fertilizers are materials containing plant nutrients that are added to the environment around a plant. Generally, they are added to the water or soil, but some can be sprayed on leaves. This method is called foliar fertilization. It should be done carefully with a dilute solution because a high fertilizer concentration can injure leaf cells. The nutrient, however, does need to pass through the thin layer of wax (cutin) on the leaf surface. It is to be noted applying a immobile nutrient via foliar application it will remain immobile within the leaf it was absorbed through. Fertilizers are not plant food! Plants produce their own food from water, carbon dioxide, and solar energy through photosynthesis. This food (sugars and carbohydrates) is combined with plant nutrients to produce proteins, enzymes, vitamins, and other elements essential to growth. Nutrient absorption Anything that reduces or stops sugar production in leaves can lower nutrient absorption. Thus, if a plant is under stress because of low light or extreme temperatures, nutrient deficiency may develop. A plant's developmental stage or rate of growth also may affect the amount of nutrients absorbed. Many plants have a rest (dormant) period during part of the year. During this time, few nutrients are absorbed. Plants also may absorb different nutrients as flower buds begin to develop than they do during periods of rapid vegetative growth.
Likes
44
Share
@RakonGrow
Follow
Note : Jegliches Equipment aufgelistet welches ich nutze findet Ihr in der Germinations Woche !!! 200PPFD 20/4 Day 14: + Düngen + + 0.5L Flaschenwasser (EC 0.36) + + Canna Terrar Vega 2.9ml + + Canna Rhizotonic 2ml + + PH 6.0
Likes
51
Share
! this is my current status, gonna upload my last veg weeks within the next week - got a bit busy around Spannabis - thank you for your understanding! 💚 Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: after 48 hours of complete darkness (important for seedlings to make sure all plants switch into flower same time), I finally switched my lights to the 12/12 schedule and sent my ladies into the flower. - This one Phenos good in bud sights production but still cant catch up with the others, so I raised to pot by 10-20cm depends how it will move on - bud besides this more than healthy and going well - Day 3: Foliar spray with APTUS Regulator and APTUS Nutrispray to give them extra micronutrients and give them a little shell for protection. ! always use APTUS Regulator first and mix well with your water before adding any other nutrients for Feeding or Foliar! Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) 🌱 --- 🏷️ Big Band by Kannabia Seed Company https://www.kannabia.com/en/feminized-cannabis-seeds/big-band --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique
Processing
Likes
126
Share
@Th3L0rAx
Follow
So had to adjust the weeks in the diary but here we are day 21 week 3 and they are starting to show preflowers and I’m greeted with a faint sweet smell every time I open the tent. Grew about 3” average week over week internode distance is compact, this variety stalk is tremendous in power tried twice to start lst and both times the plant managed to straighten it self upright within hours. After some debate I’ve decided that I’ll let her be an see what happens. The stretch has started almost 3” of growth in last 3 days Water with recharge and elementXX gonna wait till day 25 to hopefully see their effect on the plants So that recharge is amazing 2” of growth in less than 48hrs made me have to adjust the light height. So from day 21 till day 25 just over 4” of height gained. Next feeding I’ll start to introduce bloom and molasses. Morning of day 27 introducing TNB Naturals and turning on the second 600w LED, plants have seen explosive growth this week, tied some of the secondary branches down to allow better light penetration. I’m excited to see what the CO2 will encourage.
Likes
76
Share
@BB_UK
Follow
Took a while to get there but OMG little note quick! So I started her in a 1 litre pot and stuck her on top of a 1.5L Pepsi bottle with the top chopped off! And she yielded heavily for that amount of soil a whopping! 224.63 wet weight so can’t wait to see what she holds dry because them buds were like boulders! So dense! I will be back to document her dry weight and then a couple of weeks later with the update on the smoke report! But I know it’s going to be so loud! She has deep pungent aromas like gassy and sweet! She’s going to be a powerhouse! She was a little over as today a banana developed but that just tells me “well done” timing just right! She’s a little long for my taste of auto but I do suggest anyone grow her she’s amazing! In the end!
Likes
67
Share
@Mr_fluffy
Follow
Anorher Week😀 so the training looks god💪 Lot of work, hope it pays of. Think the canopy is the most even I’ve grown before. Everything is at the same height. Even small popcorn sites gets light. It’s winter here so the air is very dry. Flower developing nice. Eating and drinking god. Total EC is 2.0
Likes
2
Share
Shit got serious, my biggest fear has come true, the XXL pheno is here She has grew even more than the roof so i had to perform the LST in order to provide her some regular light instead of the madness she was being This is going crazy as hell wtf this auto is growing even more than the photoperiodic ones
Likes
19
Share
7/27/2023- Prep Tent and system are cleaned and ready to go from my last grow. I have submitted my Journa for the Diary of the Month Competition here is to hopeing for good resutls. 7/28/2023- Germination Day 0- Seed initiation Well lets get this new Grow started.. So My Dad Sent me a custom Landrace Strain that he wanted me to grow out and Breed for him. The Strain is Called Black African Magic: Black African Magic, Alson known as BAM, is a Sativa pure land race strain, It's classified under the Cannabis Sative species and its genetics come from Africa-the Ituri Forest in the Dmocratic Repoublic of Congo. The Effects are said to be Very Psychedelic, used for Stress managment and for better sleep and rest. This is my frist Land Race so we, will see how this goes together.. RO Water Used Added Hydrogen Peroxided 8/1/2023- Germination Achieved G-Day1 Popped her head above the root riot today to say hello.. Woot first challenge when dealing with an unknown seed and a new Strain is getting the seed to pop and the lady to show life. 8/2/2023- Germination Day 2 Took the root riot out today and it was soaked not good plant drowing again. I am still having a hard time finding the right blance for where the water should be to keep the root riot moist and not soaked. I had to drain some of the water out of the root riot plug to help give a little oxygen. I also removed some of the water. 8/3/2023- Germination Day 3 Looking good stretching her leaves out to let in the lights 8/4/2023- Germination Day 4 Looking good a few days until I put them into the RDWC System and get this thing rocking and rolling. 8/5/2023- Germinaiton Day 5 Looking good will probably plant tomorrow if the roots are still looking good. 8/6/2023- Plant Day- Germination Day 6 Planted into the RDWC System today. Joy when they go into the system as long as we dial that in right this will now be a great grow.. Survived the hard part.. 8/7/2023- Germination Day 7 Everything looks like it is going good, she is showing some damage on the lower leaves from the over watering in the cloning machine but right now I don't see any new damage. 8/8/2023- Germination Day 8 Added the first Nutes today, to help support root growth and to help give there first jump to growth. TPS SILICA GOLD-.5mil/Gal Root Drip- 1mil/Gal GH FLoraMicro-1mil/Gal GH FlroaGro-1mil/Gal GH FLroaBloom-1Mil/Gal ORCA-.5mil/Gal 8/9/2023 - Germination Day 9 Everything is looking good new growth looks like it is praying and they are looking happy. I will take off the damage leaves probably tomorrow. 8/10/2023- Germination Day 10 She looks like she is on track the roots are starting to come out of the basket very small but starting. 8/11/2023- Germination Day 11 Cleaned up the dead leaves... Day 1 VEG tomorrow.. Water Change Day and first real meal...
Likes
13
Share
Day 38 and it is very fast as this baby has developed, it responded very well to the LST which gave it a more resistant structure with which it will support thicker flowers, it begins to fill with resin with a pleasant citrus / sweet smell. In the next week I will start giving you an overdrive to promote fattening in all the flowers
Processing
Likes
7
Share
@Kushizlez
Follow
Day 24-31 (Day 25) The smell in here is absolutely ridiculous. My last grow didn’t smell even close to this bad in early flower. (Day 27) Stretch is finally all done. #6 in the back is very stout and barely stretched compared to everything else. I doubt it will yield much but I’m excited to see the nice tight colas on it. It seems to be still getting adequate light and raising it up is hard to do with a scrog net so I will just leave it. If it wasn’t getting enough light it would be stretching right? The early frost is really shocking to me. My last indoor round definitely wasn’t this caked and I’ve never had an outdoor plant on this level either. That’s also true in terms of smell too. (Day 29) I’m still debating whether I should feed anything in flower or just leave it. The only deficiency I’m seeing is purple stems from P def which could actually just be from light intensity rather than a lack of P. I’ve done some thinking and I’ve decided to only feed my small plant. What I’m most curious about is if a PK boost will actually make any kind of a difference in flower when it comes to bud size and smokability. So to test this theory I will be top dressing a teaspoon of 0-18-0 bat guano, a tablespoon of 1-4-2 Destiny launch and a half strength watering of 0-0-15 kelp extract. I’m trying to avoid N all together as I just toxed my guinea pig plants with another experimental flowering PK boost that had a very small amount of N in it. This plant in particular actually has very early signs of N def and probably will fade harder than the rest. (Day 31) Shit. Looks like #1 is starting to herm. It’s definitely not environment or light leaks so maybe it’s just genetic or the recent leaching stressed it out too much. Either way, it’s only a single lower branch and I’m prepared to cut her down if I start seeing anymore. I double checked every other budsite but couldn’t find anymore. In my experience true herms usually start pushing bananas out of the main tops and plants like mine can usually be salvaged with little to no seeded bud. But then again it’s day 31, when these things usually start to happen. I’m 50/50 on this one. I will be watching it everyday like a hawk if anymore show up. The breeder I’m using, ‘Jordan of the Island’s’ is notorious for having unstable genetics and this will be the last time I run any of his stuff. The quality is good, certainly better than most European and Dutch genetics I’ve run but I know I could do better where genetics are concerned. I can’t wait to start hunting my archive dosidos x gelato 41 and in house sugarcane.
Likes
19
Share
Likes
10
Share
@RFarm21
Follow
Semana 12 agosto - 18 agosto 14 agosto - only water