12/18 - Wife 12/21 watered for me. 12/19 - just looked 12/20 - Watered 12/21 - Just looked. 12/22 - Just Looked 12/23 - Watered with pHed water 12/24 - just looked

My super boof plant is gonna be a really thick bushy plant. It already I showing signs of large fan leaves and the nodes are already starting to stack on top of each other. I think this will just be a plain Jane green plant in the end but seems like it will stack really well. We will see it’s always a surprise It’s day 41 from seed and all of the plants are really thriving

💩Holy Crap We Are Back At It And Loving It💩 👉FOLKS WE R ALMOST TO THE FINISH LINE👈 Growmies we are at DAY 70 and she's just killing💀it👌 👉We are in full flowering mode and she's doing great 👈 Everything is looking good even the Tiny Cup 🥤 So Shit , I gave them just a tad to much nutes at the start of feeding 👈 But I have since fixed it So I'm still doing some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Only 4 out of 28 Kannabia seeds germinated ...big shame....sent back to third party online seller @growbarato.net but just got excuses and they sent me a few more as a replacement but they didn't germinate

Hi Growmies, I'm excited to share some big news today! Although there have been some unexpected twists, it's all part of the incredible journey of gardening. I've just completed the harvest, a tad earlier than initially planned, due to finding a bit of mold in one of the buds. Despite this minor hiccup, the trichomes were already at a decent 10% to 15% amber. So, all things considered, the timing ended up being pretty spot-on. The harvested weight was a solid 609 grams after trimming, which is quite a feat! A lesson learned for next time: perhaps I let her grow a few too many buds, leading to a denser canopy than ideal. But on the bright side, the aroma is absolutely divine. I sampled an airy bud that had dried a bit, and wow, it packs a stronger punch than its clone mother. And the flavor? Pure, unadulterated cheese – no hint of pineapple here! Now, the anticipation builds for the final dry weight, which I should know in about 3-4 days. It's always exciting to see the fruits of our labor fully realized. A huge thanks to everyone who's been following along on this journey. Your interest and support mean the world. And now, the adventure continues! I've started on Epic Buzz by Anesia Seeds. The diary for this new chapter is up and running, and the seedlings have already sprouted, marking the beginning of another exciting phase. (https://growdiaries.com/diaries/185718-grow-journal-by-salokin) I can't wait to share more updates with you all. Here's to the continued growth and learning in our gardening adventures!

3 dernier jours avant rinçage, demain je met pour la dernière fois les nutriments, l’odeur est à tomber par terre surtout la runtz qui sent le bonbon 🍬 🍭

Seeds look healthy and have been planted in small cups after being successfully germinated. I'll pick two out of three. I'm still calibrating this setup, but so far it can easily maintain 25 - 26° C when lights on and around 20° C off. ----------------------------------------------------------------------------- RUNTZ (ZAMNESIA SEEDS) FEMINIZED DATA SHEET Brand Zamnesia Seeds Genetics 50% Indica / 50% Sativa Parents Gelato x Zkittlez Flowering Time 8-9 weeks THC 27% CBD <1% Yield (Indoor) 450-500 gr/m² Yield (Outdoor) 400-450 gr/plant Height (Indoor) 130cm Height (Outdoor) 180cm Available as Feminized seeds Flowering Type Photoperiod Sex Feminized

I am updating the harvest pages with the new images taken with the microscope, you can find here the extra images for the varieties not included in the diary, while for the varieties in the diary you find the images in the harvest pages.

If you don't follow my Instagram then you will have to read this portion. Lineage Breakdown: Pink Sugar Breath F1 created by UFO Genetics. Pink Sugar Breath: Platinum Kush Breath(IHG) X Pink Sugar Cookies(UFO) Pink Sugar Cookies: Sugar Cane(IHG) X Gsc Twister Pink Sugar Breath F2: Pink Sugar Breath Male(Funk/Purple Stems/Dumper) X Pink Sugar Breath Female(Pink Sugar Cookie Pheno) Bred by Me. I originally popped a good amount of these testers I created using a funk sugar breath male and a baker dough sugar breath with more of the pink sugar cookie lineage. This resulted in a pheno hunters dream. Each pheno develops massive amounts of resin. Green phenos imo are the best smokes SO far. They range from chemical og funk to og funk and dough. The purple pheno has more of a kush breath with sugary dough to it. Lastly is the pink pheno. The pink pheno develops amazing trichome production with all terps within the mom and pop. I originally popped these in x3 ran soil. They were broken in half. Overwatered. You fucking name it. I was stress testing this already herm vulnerable gsc twisted/ogkb hybrid. That being said the average grower should have minimum to none herm issues. 3 broke out batch but it was just a small trait from the vigorous stress I gave them. They developed high bract to leaf ratio with an intense sativa high. Growing these require 63 to 72 for a full expressions and an added body buzz with that kush breath high. 9/10. Flowering expect these to stretch 3x as big. They will need boosters/ extra feeding withing 17 days from flip. These are limited tested F2s. Only available @ [email protected]

She has grown about 10cm in the past two weeks showing signs of young stigmas no signs of deficiency the Fuel dog looks healthy for the hight she is. The fuel dog will not be fed anything until required. She stands at approximately 28cm

Entering the 11th week and she is still filling in slowly but surely! I did some more LST to tie down some branches even further and open up the spacing between colas to allow light to get in to lower buds. I also did some defoliation as she is super bushy. This variety has been know to take a little longer to finish and she is right in line with that. I am honestly thinking another three weeks at least before harvest.

Week 1 : Auto Colorado Cookies Biotabs sprouted quick bursting out of their shell, stayed in the propagator 4 days then straight and erly into the forever home prepared according to the @biotabsf69 method in 5 gal pots, all soil plus 23% perlite just eyeballed it dont know why i'm saying it was that precise lol. mixed in the startrex , added the mykos 3 in the pot and two in the cavity for the root plus, watered with orgatrex and bactrex then used boom boom spray to keep the humidity at around 70 for a day maybe a bit more. got some good pictures of the seedlings in but watered again with plain water 2L on day 3, now the medium is wet and wil likely remain so until late next week . just plain water until week 5 folks dont hold your breath. Just going to be using my special spray, co2 and kelp extract once a week some micro nutres in the spray of my own creation. Enjoy ! VPD .05 - 1.0 finally got it basically right after 3 days

Opium grows and grows and just didn’t stop 😂 144cm now lol He should stop with that and bring the energy into the buds

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

We go into the second week of Flowering... The plants accepted the fertilizer change very well. Everyone looks very healthy. The strong green just looks beautiful in my eyes --------------------------------------------------------------------------------------------------- Controller AC Infinity Pro - connector for the external light control, RJ-12 - 2 plugs with which I can control dehumidifier and humidifier. - 2 fans run 24/7, 1 Oscillating from spider farmer Light - 12/12 h PPFD - 900-1000 nmol VPD - 1,3 - 1,6

😁

We back with some buckets! Time to fire up the pumps and get this show on the road. Soaked this beautiful little gem of a bean in some water until it cracked then threw it into the bucket with 100% perlite. Started them on a low dose of maxigro on day 3. Doing these diy Dutch Bucket style as always. Going to be running 8 in house genetics strains on the system with constant 24 hour a day irrigation. Not much exciting going on yet, but with a little luck that may change pretty soon. A huge thanks again to @wildeweed for this beautiful bean.