Likes
Comments
Share
2025-09-18 Kush´n Cookies had a great Time- she doubled in size and biomass I gave her some training ( mix of mainline( supercropping and topping) and i started the Autopot-System so easy peacy from now on... Container: 35L Smart Pots Growing Method: Autopot System with "Water-Only" strategy 🌿 Soil Preparation Base Mix Recipe: 5g per liter soil - Startrex 5g per liter soil - Silicium Flash Mixed thoroughly for optimal distribution 5x Fertilizer Tabs - strategically placed near bottom (20cm height) for autopot compatibility 1 tsp Mycotrex - applied directly in planting holes Bactrex solution - used for initial watering 🏗️ Layer Construction Bottom Layer (10cm): Drainage material (clay + perlite) Air Circulation: Airdomes positioned Growing Medium: Pre-mixed soil with embedded fertilizer tabs Root Zone: Mycotrex application + seedling placement Initial Watering: Bactrex solution ⚙️ System Activation ✅ Setup Complete - Autopot system now delivering automated water-only feeding From this point forward: Pure water automation via Autopot system 🙏 Acknowledgments & Partnerships Special Thanks: Biotabs - Premium nutrient solutions 🏭 Puraplants - Autopot system provider 💰 Exclusive Discount Codes 🌐 Puraplants (Hamburg, Germany) www.puraplants.de Code: GrowBigger → 10% OFF Biotabs Webshop biotabs.nl/en/shop Code: GDBT420 → 15% OFF
Likes
3
Share
8. Woche Läuft soweit gut, Z-Up ist aktiv am Bloom produzieren 😊
Likes
8
Share
Day98 is the Harvest day for Tamara and finally 1105 g wet for my first grow. I am satisfied with the result. Thx to FastBuds for the good strain and thx Tamara where Share 98 days with me and my fails 🤭🤗💚.
Likes
70
Share
All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 35 start of week 5 since sprout Today I increased my ppfd to 410 highest, 400 center, and 385 lowest (also raised the light panel to 32 inches and increased the wattage to my second tick up of 5) temp and humidity are set at 74F/63%RH/33%IL Vent Oldest leaves are looking more and more crusty now and crack when touched. And now one of my newest leaves are starting to show signs of the brown spots. HST looks to be going okay as all branches turned upward in a day - seems like the stems are now dried out but I could just be noticing hardwood setting in - I know they are still letting something through as the newest nodes are starting to grow - hoping it's just a transition to the new position but will obviously monitor Defoliation, removed the 4 oldest leaves affected by the brown spots to see it it speeds up on the next leaf. Did light LST to adjust binds and ensure they are not constricting the branches. Day 36 (late entry but this happened yesterday) Stats were all checked, VPD 1.0 with 73F/64%RH/33% IL Vent - Light measured ppfd at 410 highest, 400 center, and 390 at lowest Took control stats - 3 soil ph meter tests 5.35, 5.24, and 5.33 - truly concerned this is my issue, I went with hardwood ash from my grill. Measured 1/3rd cup and sprinkled it over he whole top being sure not to get any directly on the plant for fear of burn - used a gallon of de-chlorinated tap water at 8.06ph to water it in. Noticed side runoff but looked like less than a quart came out. This is where I realized I never change my drip tray out before I did this, so ppm test would be worthless so I skipped it. Day 37 Took stats this morning- VPD and lights mostly the same as yesterday, but with new growth the lights changed a little - ppfd at 410 highest, 400 center and 400 at lowest. took control pictures for each section again for comparison still showing more brown spots spreading over the oldest leaves. However the hardwood ash seems to have helped the ph. I took 3 soil meter readings this morning and got 6.27, 6.56, and 6.69 for avg of 6.506 Now I will watch to see if the feed nutes can get through and help stop the spread of the issue. Day 38 Checked ph meters - liquid meter needs slight calibration but since Im not using it today, I'll do it later. However my soil meter is still spot on. So I took 3 readings - 6.11, 6.09, and 6.1 for and avg of 6.1 - falling from yesterday by about .4 - also took a picture to show where I have been random in my soil checks Took test pictures of each quarter again. UL, UR, LL, and LR - each quarter got progressively worse still however the new growth seems to be doing pretty good still. - I dont want to take the older ones off until she shows a positive response to something. (only have these and the new leaves left.) So I plan to treat with feed dunk/de chlorinated tap again (not today, in a day or two) Did some slight adjusting of the branches to keep them the same height as the left side was lifting the binds out of the soil. ppfd now at 430 highest, 420 at center and 415 at lowest - VPD steady at 1.0 using 73F/64% RH/33%IL Vent Day 39 Did 3 morning readings of ph - 6.84, 6.78, and 6.85 for an avg of 6.823(higher than yesterday's avg by .7 and 2 days before by .3 so I will continue to monitor so that I can catch it before it runs up by flushing with lower ph feed or water) She is growing as noted by the increase in height now. close to 9 inches tall here and the 8 cola tops look fairly level so I didnt do any LST or bind adjustments. But measured ppfd and got 455, 440, 435, and 425 over the 4 new growth areas. VPD still consistent at 1.0 - 73 to 76F/ 63 to 64% RH/ 33% IL Vent Brown spots are still increasing and the leaves are beginning to taco as the last ones did. New growth doesnt seem to be showing any signs yet, so fingers crossed I got it with ph. Day 40 Checked stats - PH seems to have stabilized, 3 readings 6.81, 6.84, and 6.82 for an avg of 6.823 VPD at about 1.0 with temp at 74F/63% RH/ and 33% IL Vent. PPFD was at 455, 440, 430, and 435 over each cola in same order as pictures. She is still growing so I took pictures of that progression with a tape measure. Hardwood seems to have set now as none of the branches lifted by flexibility just new growth. Still relatively flat Calcium deficiency seems to be staying on the oldest leaves with the edges now crisping enough to begin to crack on bending attempts. The newest leaves are still not showing any signs of issues. I may defoliate them tomorrow so she can have time to recover before binding the branches again once she's above 12 inches tall. ---- correction ---- Now that I have examined the new growth on a larger scale in photos, I can see the start of the issue there now too! Q!%#$ Day 41 Im going to defoliate the bad leaves and see if it progresses any further in the next 2 days and re-evaluate in 3. It's been 5 days since the wood ash treatment and the last time she's been given water. However the soil is still fairly wet since that was so close to the dunk before, so I plan to feed with nutes in a day or two to replenish more of what washed and and hope the ph was the single issue fixing the rest. Removed the other set of binds today and took front/back pictures of the leaves I took off. They were surprisingly wet even though they look crispy. There's still plenty getting to these branches as they stand tall in my hand for close to 30 minutes before finally drooping over by being cutoff. Noticed red stems making me think it might need phosphorus in that next feed Also added a modified tomato plant support to the pot to get an idea of what kind of growth Im looking for next should she still want to grow on
Likes
117
Share
@Ageddd
Follow
I made some kind of homemade provisional cage this weekend, following your advices. I used optic fiber, net, and bambu sticks, that i had in my home. I know is not the best in the world, but i was seeking utility and low cost. Ms Black Domina progresses well, but as my FIRST GROW i am doubting when she will finish,(I thought about not giving her nutrients last 2 weeks, but is hard for me to know when to stop giving more) I WILL APPRECIATE ALL ADVICE :) Nutrients same as last week, Sugar Royal 2ml/l 1 time per week and BioBloom 4ml/l 1 of 2 irrigations. As insecticide i use a mix made by me, 3 ciggaretes per litre and flush 1 time per week or so.
Likes
2
Share
🌿 Frosted Guava Auto by Zamnesia | Pheno A | Week 7 (Flower Week 4) 🌱 The Room Is Coming Alive One of the biggest goals of this 8×8 Adventure has never been growing a single impressive plant. It's about building an entire ecosystem where every phenotype has the opportunity to express its own genetics while sharing the same environment, the same nutrition, and the same cultivation philosophy. Week after week, that vision becomes easier to see. Frosted Guava Pheno A continues doing exactly what she has done since the beginning—growing with balance, consistency, and confidence. While some plants steal the spotlight with explosive growth, she continues proving that steady development is often the foundation for exceptional harvests. Now entering her fourth week of flowering, she's no longer simply producing flowers. She's beginning to build real buds. And at the same time... The entire room is beginning to transform into a living sea of green. 🌸 Week 4 Flower – Everything Is Coming Together Standing at approximately 115 cm tall, Frosted Guava has stretched exactly as I hoped she would. Her vertical growth has started slowing naturally, allowing almost all of her energy to shift into flower production. Every branch now carries developing bud sites, and the individual flowers that appeared only a week ago are already beginning to stack together. The structure she built during vegetative growth is now paying dividends. Light reaches nearly every top, airflow remains excellent throughout the canopy, and each branch has enough room to develop without competing with its neighbours. She's becoming one of those plants that's simply enjoyable to watch every single day. 🍃 The Room Has Its Own Personality This week's report isn't only about one plant. It's also about the room itself. Walking into the tent now feels completely different compared to only a few weeks ago. The empty spaces that once separated individual plants are slowly disappearing as every canopy begins growing together into one continuous layer of green. The room feels alive. Every plant is stretching toward the light while simultaneously filling the space around her. Each phenotype still shows its own personality, but together they're becoming one complete ecosystem. That also means something else is approaching. Not because every individual plant necessarily needs it... But because the room does. Within the next week or so I'll likely perform the first significant defoliation of flowering. This isn't about removing leaves simply because I can. It's about maintaining airflow, allowing deeper light penetration, reducing excessive humidity pockets, and making sure every plant continues receiving the environment she deserves as the canopy becomes increasingly dense. Sometimes we don't prune for the plants. We prune for the room. 💡 Lighting Above... And Below The lighting system has also evolved alongside the plants. Above the canopy, the Future of Grow Black Series LED continues delivering approximately 1,000 PPFD across the tops of the flowering plants. For anyone new to growing, PPFD simply measures how many usable light particles reach the plant every second. In other words, it's one of the best ways to understand how much energy the plants receive for photosynthesis. Around 1,000 PPFD provides an excellent level of intensity for flowering under these conditions. Below the canopy, the Lumiflora under-canopy lighting continues adding another layer to the system. Rather than replacing the main light, these bars help illuminate lower flowering sites that would normally receive much less intensity once the canopy becomes dense. It's still early to judge the final results, but I'm genuinely excited to see how much they improve lower bud development as flowering progresses. Like everything else in this diary... The harvest will tell the real story. 🌬️ Airflow – Creating A Living Environment One aspect that's often overlooked is air movement. Good airflow isn't simply about pointing a fan at the plants. Inside this room, multiple oscillating fans create moving crosswinds that constantly change direction, preventing stagnant pockets of humid air from developing between the branches. At the same time, cooler air naturally enters from the lower section of the room while the extraction system continuously removes the warmer air accumulating near the ceiling. This constant vertical air exchange creates an environment where fresh CO₂ is continually introduced, humidity remains balanced, temperatures stay remarkably stable, and every leaf continues transpiring efficiently. Healthy airflow is one of the quiet heroes behind every successful flowering room. 🌡️ Environment Environmental conditions continue remaining beautifully consistent: • Day temperature: 29°C • Night temperature: 25°C • Relative humidity: 60% • Root zone temperature: 21°C • Solution temperature: 21°C • CO₂: Approximately 639 ppm This gives the room a VPD that's right where I want it for this stage of flowering. For growers unfamiliar with the term, VPD (Vapour Pressure Deficit) describes the relationship between temperature and humidity, helping determine how efficiently plants transpire and move water and nutrients through their tissues. Rather than chasing individual numbers, I prefer building an environment where temperature, humidity, airflow, irrigation, and lighting all work together as one complete system. Another question I often receive concerns CO₂. The reading of roughly 639 ppm isn't coming from bottled supplementation. It's simply the natural level inside my home, helped by continuously exchanging fresh household air through the grow room. During the evenings, with the family inside and normal household activity taking place, those natural CO₂ levels remain more than adequate for this style of cultivation. Sometimes simple really does work. 💧 Nutrition The feeding program remains unchanged this week, allowing the plants to continue flowering without unnecessary adjustments. Current feeding: • Terra Bloom • Pure Zym • Sugar Royal • Power Buds • Green Sensation Maintaining consistency often produces better results than constantly chasing new recipes. The plants certainly seem to agree. 👀 Looking Ahead Over the coming week I expect flower production to accelerate noticeably. The stretch should finish completely, bud sites will begin joining together, resin production should become increasingly visible, and Frosted Guava will start investing nearly all of her energy into building flower density rather than producing new height. The canopy itself will likely become full enough to justify the first flowering defoliation, improving airflow and ensuring every flowering site continues receiving excellent light throughout the room. It's one of my favourite moments of the grow. Everything starts feeling like a real flowering garden. 🙏 Final Thoughts Frosted Guava continues reminding me that consistency often beats drama. She hasn't demanded constant attention or complicated corrections. Instead, she's simply responded to stable conditions, balanced nutrition, quality genetics, and a healthy environment by doing exactly what nature designed her to do. Watching this room slowly evolve into a complete flowering ecosystem has been just as rewarding as watching any individual plant grow. Every week the pieces fit together a little more. A huge thank you once again to Zamnesia for making this incredible project possible, Plagron for providing outstanding nutrition, Future of Grow for the incredible Black Series lighting, Lumiflora for adding a new dimension with their under-canopy lighting system, AutoPot for keeping the root zone thriving, Mammoth Tents for providing the perfect home, TrolMaster for maintaining precise environmental control, Prima Klima for outstanding ventilation, and to everyone following this journey here on GrowDiaries. Your encouragement, comments, and shared passion for growing continue making this 8×8 Adventure an absolute pleasure to document. Until next week... Growers love and happy growing! 🌱💚
Likes
3
Share
@CBDLord
Follow
Az Infinity autómata öntöző rendszer, növényenként 3l öntözővíz adagolására alkalmas. A növények megnyövekedett vízigénye eredményezi, hogy három nap alqatt teljesen kiszárad, az öntöző A passzív vízzellátás látványosan megdobta a növekedési fázist.
Processing
Likes
14
Share
@hempmex
Follow
as you can see at pick with 2 Male Plants i will to polization some other Female plants some one recomend me some thing to do with both Male Plants, are Bigger, and Taller
Likes
19
Share
@Tazard
Follow
Color me absolutely impressed! This girl is huge and covered in Bud’s. The bud sites are tight! She really is a beautiful plant no wonder she’s currently sold out! Thanks for following along.
Likes
49
Share
@Roberts
Follow
I thought I had major issues, and stunned this plant during growth. Apparently this plant is a very short strain. I didn't mess it up as bad as I thought. I did have issue with the grow. Bud smells very intriguing, and looks potent. I don't have much else to report, but am curious to how it smokes. Thank you Fast Buds, Athena, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
2
Share
Topped this girl this week, she’s growing pretty good. Very nice looking plant to my eye.
Likes
21
Share
Thanks again for all the love and support Thank you Seedman for providing the seeds and allowing me to be a part of the #Seedsman420GrowOff. It was a great experience which j hope to be a part of again! I plan on doing my content in ny next grow. I have a bunch of ideas for timelapse videos and cool other videos of the grow. Stay tuned and follow for more Highgrade Harvests! Follow me on YouTube and Instagram for more content! @highgradeharvests
Likes
13
Share
@GrowerGaz
Follow
Can't keep up with defoliation once the autopots kick inn, best room upgrade ever. The Cuppa T was the biggest plant before the other four went in their autopots. Just pH water this week and a foliar feed with my KNF FAA, WCAP and LAB. Flowering start on the 29th under the new Lumatek Attis 300w
Likes
34
Share
@rhodes68
Follow
1/10 Week 10 Both are in flush and from the looks of the tricones these are the most potent plants we have grown to date. Drinking has really slowed down but keeping the un-PH one gallon daily flush since tap water is cheap. Annie doing very well under the LED lamp, TS-1000 plenty large enough for one plant in flower. This is encouraging for plans to replace the HID with either a TS-2000 or TS-3000(preferred) this spring before the summer heat. Just a few more days....😎 1/11 Bud pics Harvest Belle on 1/13 - Annie 1/16 Just getting them ready. taking off some useless leaves etc... 1/14 Harvesting Belle today, let her dry out one last day. Annie harvest at weeks end. Harvest pics and total numbers at end of week when I take Annie 👉BELLE HARVEST 963 grams wet 👈 Annie got her last watering today, harvest in two days 1/15 Harvesting in about 12 hours, pics and numbers then