Hello guys😍😍 Fifth week of growth. Last week, the plants were a little shocked after topping, but after a few weeks they returned to normal growth. To reduce this shock, I used BioEnhancer fertilizer. And this week I checked the roots. The pots are ready to be Transplat.Thank you for following my project. 🌷farah4weed🌷

Hi folks, I'm coming here to start the process of ending this grow journal. I harvested about three months ago and the weed is definitely cured. Photos are about to come — I'm doing a real studio photo shoot for those buds, they deserve it! While waiting for the shots, I made some pretty damn dank hash temple balls using the iced water extraction method (solvent-free) with my little washing machine. It's a mix of the 8 strains I grew here — never ideal to mix different kinds of resin... but man, this is some serious dedicated work, so I'm making myself happy with that 14g shiny temple ball in the end 😉 Here are a few details about my process for you guys (and don't forget — you can do it with fresh material! Fresh frozen is always tastier. Also, the drying process is much more efficient and faster with a freeze dryer, but... you need the budget for that. I don't, so I go with the air drying method — check it out below): 1. Get your dry trim, then cure it properly for at least a month (I did 3 months). Smell it — mmh, sweet, dried to perfection. ✅ 2. Freeze it, delicately wrapped in a freezer bag. 3. Let a large amount of tap water sit for at least 24h to remove chemicals like chlorine, then use it to make plenty of ice cubes — don't be shy, especially if you're not working in a cool environment. 4. Prep your washing machine: add trim between two layers of ice, fill up with clean water (as much as you can, large vortex is better than a smaller one), then make it seat for 30 min (45 min for thicker buds) the time that the dried green material gets wet again. 5. Prep your filtering tools: catch bag, different mesh bags, spoon, etc. 6. Wash as many times as you can before green contaminants appear, as these lower the quality of your hash — don't hesitate to go up to 8 to 12 washes if the resin still looks clean! Important: each wash has its own specific duration, and they get progressively longer as you advance through the process. Frenchy Cannoli (a true hash legend) provides a detailed timetable for this — from as little as 30 seconds to 1 minute for the first wash, all the way up to around 25 minutes by wash 8. Make sure to follow that schedule rather than using the same duration for every run or running it too long the first wash !! It could breaks to quickly your precious material before you collect all the trich's and the quality would be lower in the end. 7. Collect the wet resin in the mesh bags with a frozen metal spoon, make patties with the resin, and let them sit over some towels in order to drain as much water as possible (place a tissue made for hash collecting over the towel). 8. When the patties are a little dry to the touch, wrap them as they are in the tissue and place them in the freezer for 48h or more. 9. With an iron strainer, microplane your patties over the biggest flat surface you can get! It's important that your micro pieces of hash dry widely and don't get too compacted. Any failure in the air drying process will nucleate rot, ruining your hash in the end and making it a poor product — eventually something to throw away. Sad when you think about all the phases of the process to get to this point! 10. So, in order to air dry properly, you must — it's not optional — lower the RH of your dry room to 35% or slightly below, never above and let it dry as long as needed until the material feels like dry sand. For myself, I found 10 to 15 days is ideal. The room must be very lightly ventilated (not directly on your resin!) and in complete darkness — the goal is to preserve all those delicious terpenes! Ideally, temps around 60°F or 16°C 11. Now that it's dry, collect your resin with a large thin spatula! Make a little mound between two layers of PaperHash, boil some water, and fill up a wine bottle with it! ⚠️ From this point on, to avoid exposing your carefully dried resin to a more humid environment — which could ruin all your hard work — everything must happen in the same drying room. Keep working at 35% RH until your temple ball is tightly and airtight wrapped in PaperHash. (And don't forget to drink water — it's dry in there! 💧) 12. Start to slowly press your resin. Magical moment. Finally.... 13. Press 3 times for 10 to 15 minutes in order to really decarb your hash — because that's what it's all about! Between each press, try as best you can to shape a patty... until the final press, when you'll be able to form that magical shiny temple ball (it only shines with gloves on, guys 😄) 14. You are now allowed to try it — for quality control purposes only, of course! 15. Because you want to age your hash for the sweetest 5-star smoking experience: wrap your temple ball in a large piece of PaperHash — if you can get that brand it's ideal, or another kind (check https://thepressclub.co) as long as it's organic! 16. Place the wrapped temple ball in a glass jar and store it in a dark, cool place. 17. Wait a minimum of 3 months before opening it. 18. Open, smell, touch — you'll be amazed. Roll it up with some weed or tobacco or both (I do both) / Or get a Hooka... you are smoking some true primo aged hash made by yourself! Taste the difference and realize all the path from choosing the seeds online until this first amazing puff ... 🙏 I want to credit my inspiration for making this kind of hash to the great Frenchy Cannoli, who has shared all his knowledge through amazingly rich tutorial content that you can find online with a bit of searching. 😉 Peace Frenchy 🕊️☮️

First grow. Blueberry Auto-flowers from Quebec Cannabis Seeds. 14 days from sprout. Started from seed. - 32” x 32” x 53” tent. - Viparspectra 450w LED. - 6” vivosun fan/carbon filter system. - Hydrometer, digital light timer, digital PH meter, soil moisture meter, 8” oscillating fan. - One 5 gallon and two 3 gallon soft pots. - Distilled water, pro-mix organic soil, perlite, dolomitic lime.

Today is Monday (09-08-21). I gave them nutrients for the last time, and it will be time for flushing from now on. I expect the harvest in two weeks for the first two plants, and the third will be ready in 4 weeks. Everything is going right so far, this Thursday I will increase the lights to 100% , so it will be a nice trichome boost in the last two weeks.

Dear Friends ❤️ in this week we topped again and bended these two Slurricane by Anesia Seeds. They recovered really fast from this stress again, from now they will develope a lot of bud sites! I missed to give top crop Big one at 14 october, it is important to give 10 days before flowering The last day of this week we switched the light to 12/12 week #5 of vegetation The 240w light is working at 50% power and now it is combined with the 480w quantum board. I consider week 4 the week from 18/10 to 24/10. day to day fert schedule: 📅 18/10 📅 19/10 NEEM OIL 📅 20/10 📅 21/10 Top Veg 3ml/L-Deeper Underground 2ml/L - Green Explosion 2ml/L - big one 2ml/L - PURPINATOR 1,2ml/L 📅 22/10 📅 23/10 📅 24/10 we are starting a new grow cycle with a lot of AMAAAAAZING genetics. We can't wait to show you our progresses with these little babies. I really want to thank Martin of Anesia Seeds, he helped us with the strain's choiches, so THANK YOU Martin, thank you Anesia seeds. Seeds and merchandising ( my god we love these things ❤️❤️❤️) were sent in a dark discret package, shippin was incredibly fast, now is our mission to achieve the best from these lovely seeds. Germination was incredibly fast, less than 36Hours to make the root sprout on. ABOUT: Slurricane Slurricane was created by crossing two first-class trend varieties: a Nor-Cal-Cut of Do-Si-Dos was crossed with an extremely potent and long-selected Purple Punch. The result is an outstanding Indica dominant hybrid with an extremely high THC content and a complex terpene profile. Slurricane is currently one of the most popular strains in the United States. We became aware of the genetics early on and got down to work to get the best out of it and bring the strain to its limit. Anesia ‘s Slurricane is currently one of the strongest cannabis strains in the world and can produce an incredible THC level of up to 30%. Its resin production is gigantic and the aroma is simply stunning. The plants from the Slurrican seeds are easy to cultivate, grow quickly and vigorously. With sufficient light, the plants develop into real gems that leave nothing to be desired. Within the flowering period of 64 days, the variety forms very dense and compact flowers that have an oversized resin production. The buds are covered with a glittering thick layer of resin. The aroma is intensely fruity and sweet like berries with a fresh citrus note. Not only its taste becomes an unforgettable experience. The high offers an amazing potency, with strong physical and cerebral effects. Slurricane is a knock-out strain and the effects last long and create happiness. It will bring your body to complete relaxation and envelop you in a warm cloud, while at the same time creating positive feelings that bring all your senses to a higher level. The thick, dense buds carry a very unique und tasty trichome covering that make them ideal for producing cannabis concentrates. Data sheet: genetics: Do-Si-Dos (Nor-Cal-Cut) x Purple Punch • feminized seeds • flowering period: 64 days • 60% Indica, 40% Sativa • yield: 450-500 g/m² • Medical uses: mood enhancement, stress, pain, muscle tension 💸💸💸💸💸Buy Slurricane https://anesiaseeds.com/product/slurricane/ 🔧💡WHAT WE ARE USING💡🔧 -LIGHTS: 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B temperature: 3000k Heat dissipator board: No Noise: 0dB 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B temperature: 3500k Heat dissipator board: YES 15MM Noise: 0dB -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Power: 42-50W RPM: 1940-2620 minimum -1 Maximum air flow: 430-560 m³ / h Sound pressure level at 3 m: 32-44 dBA -FANS: A)OSCILLATING FAN Maximum consumption: 20 W Minimum consumption: 17 W Fan diameter: 15 cm Housing diameter: 20 cm Height with handle: 35 cm 2100 revolutions per minute Two speeds B) COMPUTER FAN Sunon DP200A - 230V Nominal power: 22/21 Watt Noise level: 44 / 49dB (A) Rated speed: 2700/3100 RPM ± 10% Air delivery: 95/115 CFM C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h, can be used in medium-sized rooms. High silence and reliability make it adaptable and versatile. Technical details: Rotation range of 90 degrees Tilt adjustment Three speeds of rotation Suitable for wall and ceiling suspension Power Consumption: 35 Watts Air Flow: Approx. 740 mc / h Operating noise: approx. 39 db Diameter: 20 cm Voltage: 220-240V Frequency: 50Hz Dimensions: L 28 x D 16 x H 28 cm 💊💉💊FERTILIZERS: MAIN FERTILIZER BRAND: TOP CROP I use these products: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ ❤️ THANK YOU FOR BEING HERE ❤️ Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

Hey everyone 😀. 2 days ago the light was set to 12 / 12h, because this time I don't want to use either topping or LST, and will leave all 8 plants in the system as a test to get many small trees . From next week we will start counting the correct flowering days :-). The plants themselves develop very well, the back ones a little faster than the front ones, but that doesn't matter at all. Until next week you will continue to get some Aqua Vega fertilizer for the stretch, before Aqua Bloom is used next week. I am very curious how they will develop until next week, and until then I wish you all the best, stay healthy and let it grow 👍🍀 You can buy this Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧

My autos looking beautiful almost ready to chop

I've been putting this grow diary off for too long. I'm somewhat new to growing, so it would help to have some of you share your thoughts as we progress through the next few days/weeks. I've got a few strains going in my grow space. A mix of a couple autos and photos. This diary is all about the Auto Blow Dream by Victory Seeds. I'm using a 3 gallon fabric pot, fox farms trio and this plant has a 1000w (185w draw) BestVA FS LED dedicated to it. Soil is a simple mix of peat moss and perlite, with some fishmeal and bonemeal added.

She is getting 🍦 ❄️ frosty stacking real nice I definitely recommend this cultivar to grow shoutout ganjafarmer.com ganjafarmer seeds every cultivar I've grown from them has ben fuego this gmo has some funky terps too she is really reaking

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

Letzte woche für die damen.😋 Bin echt zufrieden mit diesen run. Für die hitze die ich hatte und den kleinen stickstoff problem. Super zufrieden bis jetzt. Hoffe sie haben potenz das es mich auf meinen arsch sitzt

Stretch phase is over😁 and the bunch are happy. I gave em a serious defol and lollipop on day 11 of flower. Next week i'm gonna introduce em to Canna Terra Flores🌺 Stay elevated growmies👍

Week 2 for the solo Afghani went smooth. Looked a little slow to develop her first proper set of leaves, but the root development should help speed up her progression. Still feeding off the slow release 444 and is now regularly drinking about 2oz of water every other day. I also spritz the bottom of the outer cup to keep moisture levels high for stretching roots. She's about 36" from the light. Hoping to get a little stretch to make training easier. Added a couple new pics to get the week caught up. Stay tuned, week 3 starts training.

Great week. The plant is really starting to branch out or bush out, getting ready to pack on those nuts! I can see some purple coming in on the older leaves which is beautiful and well, I'm just really impressed so far with ganjafarmer seeds.

Great grow from start to finish. Chopped on day 77 and very happy with the yield.

shes getting there now, considering shes under a 100w light shes doing well. stinking now too, smells like a bag of haribo tangfastics, really sour with a mixed fruit hint, stem rub smells exactly like fresh cut grapefruit honestly haha hard to pick out a specific fruit smell from the bud though its just fruity, yous know what i mean anyway ha. really sensetive to nutes, getting burn even after low dose and feed, water, water, feed schedule.

Aug 2: Sunday Punch EV continues to be a great plant. Third week of 12 h darkness is now done and lots of nice buds are starting to form. The buds even have their first bit of frosting showing this morning. Quite hot today but it will cool off a bit tomorrow. Aug 3: started leaving plant outside again so back up to 15.5 h of daylight here now. Continuing to use far red light at dusk as a bloom booster. Aug 7: rained over the last few days. Have been shaking water from the colas to keep them dry to prevent bud rot. Some rain on young buds is fine and plants love the rain, but wet buds can cause bud rot. Have stopped using molasses now. Great for growing, but not for smoking, so avoid using in the last four weeks or so of flowering.

******************************************* 11.02. Day 16 ******************************************* 13.02. Day 18 ******************************************* 16.02. Day 21 *******************************************

--

Weekly update for these girls. They got a defoliated and lollipopped this week. Also went full on into preflower showing pistols and flower sites everywhere. Over all they're growing like champs. Happy Growing.