Likes
Comments
Share
@tterpy
Follow
Last week!!! Continued to flush on 9/29 (Day 58)
Likes
7
Share
Gigabrain Auto – Anesia Seeds Woche 6 gesamt | Blüte Woche 1 Die Gigabrain Auto ist jetzt ebenfalls sauber in die Blüte gestartet und zeigt eine etwas andere, aber sehr interessante Entwicklung. Der Stretch ist vorhanden, aber nicht ganz so extrem – dafür wirkt sie kompakter und buschiger mit vielen stabilen Seitentrieben. Die ersten Pistillen sind klar sichtbar und die Budsites formen sich schön entlang der Triebe. Besonders auffällig ist die gleichmäßige Verteilung – viele potenzielle Colas, die später ordentlich Masse bringen können. Die Pflanze steht insgesamt sehr gesund da: kräftiges Grün, stabile Struktur und gute Verzweigung. Sie wirkt etwas gedrungener als die Gorilla Girl, aber genau das könnte später für richtig dichte Buds sorgen. Licht-Update: Auch hier wurde das Licht von 60W auf 120W erhöht, was direkt Wirkung zeigt. Die Pflanze nimmt die zusätzliche Energie gut auf und reagiert mit stärkerem Wachstum und aktiver Budbildung. Die LED kann später noch auf bis zu 180W gesteigert werden, aktuell läuft sie aber sehr stabil im optimalen Bereich. Geruch ist aktuell noch zurückhaltend, aber leicht würzig-süß wahrnehmbar. Noch eher im Hintergrund, aber die Richtung ist klar – das wird in den nächsten Wochen deutlich intensiver. Setup / Notes: 120W aktuell → sichtbarer Wachstumsschub Kompakter Wuchs mit vielen Budsites Stretch moderat, gut kontrollierbar Sehr gesunde Gesamtentwicklung Keine Auffälligkeiten oder Mängel Fazit Woche 6: Starker und sauberer Start in die Blüte. Die Gigabrain setzt mehr auf kompakte Power statt extremen Stretch – wenn die Buds so dicht werden wie es aussieht, kann das richtig böse enden 🔥 --- Wenn du willst, kann ich dir später beide (Gorilla Girl & Gigabrain) als Vergleich für Woche 7 schreiben – kommt auf GD immer richtig gut 😏
Likes
11
Share
@DimJesus
Follow
Saludos 🙌 completando la séptima semana y comienzo de floración 🙏 Cambié el fotoperiodo el día 2/04 y la planta dió una buena crecida desde entonces. Comenzó a oler un poco más también pero todavía sin señales de pistillos, ansioso para verlos. Buenos humos 🍃
Likes
10
Share
@Lazuli
Follow
the flowers start to smell like banana i never smelled anything like it She also starts drinking a lot now she is a bit bushy but the budsites are still directly in light
Likes
8
Share
@Piro420
Follow
Finally the stretched stopped. Cut about 10 tops bent about 20 with 90s. Still right in the lights. They are looking very happy even though they are so close to the light ( thanks to high c02 levels most likely.) Another week or 2 before I cut the temps and co2 levels down. Been trimming all leaves below light line. Stinky and brutally sticky I feel like Clark griswold with pine sap when ever I am bending the tops and such.. I think even with them being in the lights I will still get a few pounds of premium flower to smoke :)
Likes
34
Share
@Dunk_Junk
Follow
Growth of 'only' 11cm this week 😅 Just over 8" Still she is growing very nice.
Likes
1
Share
Day 28: The Girlies are doing well. C Banana is forming some nice buds and node stacking but is still a lot less productive than her stablemate. She is getting g a tacky feel to her and has been stripped out to get some air and light to the mains forming. Monster Zkittelz is keeping her namesake at the front of her plan and is growing daily. She is a very good producer so far and her nodes are less stacked but plentiful. They are taking the feed at a very good rate now and I am having to refill the res twice a week now. Buds are stacking up on these girls nicely and forming long looking main colas all over the place. I think C Bananas poor start has certainly held her back.
Likes
46
Share
@Capo420
Follow
Week has had ups and downs🙃 Plants seem to be growing fine 🙂 But there is yellowing and spotting still that I cannot resolve.🙄 Day 22- Still having some kind of deficiency/issue. They are growing well, don't really seem to be stunted. I think I may have burnt them with nutes.🤧 Flushing may help. 🤷‍♂️😅 Run-off pH is at 6.08, PPM 266 I have flushed them, lowered feeding... I'm driving myself crazy. Hahaha Update 119 Day 23- Things are looking better. I definitely have been overfeeding them.😅 They are responding well to half nutes.🙌 Issues seem to be getting much better. Happy Growing! 🤙💚💪🌱😎🌱💪💚🤙
Likes
2
Share
@Jpsmash
Follow
I cant wait for this one. She going to be a monster!! 👹
Likes
42
Share
⛺️ MARSHYDRO 💡VIPARSPECTRA 🍼GREENHOUSE FEEDING BIO GROW 🌱 WEEDSEEDEXPRESS
Likes
20
Share
@m0use
Follow
Ok, so I forgot to take any pics on week two and holiday time week 3 came up real fast. so we are going to skip over any of the week two details. just watered em and they grew. This week we did a nice little transplant into their final 2gal pots. Fortified with a bunch of amendments and Acti-Sol, everything is listed in the video. Any question just let me know. I don't age my medium at all and I think I should start doing this to avoid some other things, I just find it hard to do it in winter time indoors as soil can be stinky with amendments and I like it to stay in the tent under the carbon filter. Medium I used is 40% coir, 30% perlite, 20% compost, 10% vermiculite and 10% worm castings. Then the amendments are added into that at the rate of 30-60ml per 1Gal of medium. This batch has Gaia 4-4-4, Gaia Insect Frass, Giaia Diatomaceous Earth, Gaia Rock Dust, Acti-Sol Seaweed Meal, Acti-Sol Shrimp/Crab Meal, Acti-Sol 4-3-2, Acti-Sol 4-6-8 and Bokashi. Nice little mix, water it in with a bit of magnesium and microbes dissolved into the water. The bokashi should help break everything down and make a bit of a acidic environment for all the meals and rock dust to become available. Roots looked good, not a dense as some runs but still nice. I feel the soil might be a bit hot so will expect some burnage on them hopefully its nothing to crazy. Will ph down with a mix of citric, malic and ascorbic acids. They are in a rate of something like 50-60%/40-30%/5-10%, its written down in my of my notes just can't find the pad ATM. Also more videos vs anything this week. I like em more but processing them is annoying AF. Side note, my lights timer was on 12/12 not 16/8 so it explains why they went into bloom, switch it back and will top the plants next week one they start to reverse their ways and get comfortable in the new pots. Also got ride of the chive seed start as it was looking sad, plus I got a bunch of European chive varieties in the mail yesterday and want to try them out. see if they really have any different taste and what ones I like better. Till next week.
Likes
42
Share
@Prilyfe13
Follow
June 28, 2023 Day 50 Zkittlez One: Height: 24.5" DLI: 52 mol/m²/d Light Height: 22" Zkittlez Two: Height: 28.5" DLI: 55 mol/m²/d Light Height: 18" This week will focus on Zkittlez One and getting her thinned out properly. I hope to have that finished by the end of the week. I've also raised the light again to keep the distance at 22" above the canopy. It's also helping Zkittlez Two. As she is a 28.5" plant, she was definitely a bit too close to the light. The other plants in the tent may not have enough light from the higher light height. I'm not sure for good or bad. Zkittlez One has hit the 24" plus mark! She looks fantastic. I definitely need to thin out the foliage a bit. I'll wait for her to finish up. But I'll just pull a few here and there as needed. However, I don't expect much more stretch out of her. Maybe a couple more days? We shall see. Water looks great. The stacks coming off this lady are, IMO, fantastic. The whole canopy is covered in tops and shoots still reaching. Honestly, if she was alone in the tent, I'm pretty sure I could have trained her wall to wall. Alas, I have 3 other plants in there who also need light space. Lol. Zkittlez Two is also looking great! She's filling out a bit still and building up those buds. I have a bit of confusion with her top. The buds are very skinny at the top and get fatter in the mid range of the plant. Around where the side branches grew to. Happily, they match the height of Zkittlez One. Or just a bit lower. Grow System Environment: Temp: 74.6° RH: 62.3% (still super humid here) VPD: 1.07 kPa June 29, 2023 Zkittlez One This plant has been a beast the whole time. Now she is getting too big for the tent and way too big to accommodate 4 plants as I have in there now. The canopy is super deep and needs a good thinning out. Speaking of thinning out, I decided to remove the outer leaves to open more space for the other plants. I'll be doing this over the course of the next couple days. She also got a full reservoir refill today. Cleaned up the reservoir as well. Zkittlez Two This lady needs absolutely nothing. Just hanging out and showing me what I should be expecting for bud production out of Zkittlez One. Honestly, I think I need a bigger tent already. I've had this 3x3 for 3 grows and I'm discovering the disadvantage of a smaller tent. Plus the thing people seem to think is best is compact plant. I don't need mine compact. I can grow in my state without issues. The humidity is still super high. So far I haven't found a solution. I have 2 dehumidifiers in there. That didn't work at all. It's the main room the tent is in. It's super humid in there due to the weather. Tent door has been open for days. I'll ask what to do. Maybe someone has an idea. Update: So I was looking over Zkittlez One this afternoon and realized taking the tie downs out made the plant compact, but a bit too compact. So after some testing I figured out that I needed to tie down the lowest 4 branches to open up the center of the canopy. It worked WONDERS! The 4 branches along with all of the tops from each one spread out perfectly, completely opening up the whole canopy. She is seriously huge now. See pic. Just WOW I've also added a video to show her mass. Grow System Environment: Temp: 74.6° RH: 62.1% VPD: 1.08 kPa June 30, 2023 Zkittlez One is the boss of this grow. She'll need another watering tomorrow morning. I snipped off some outside leaves today. And a couple blocking bud sites and more tops. A quarter turn made a bit more room for the other plants in the tent. Well, except Zkittlez Two. She is in the way back almost engulfed by Zkittlez One. Zkittlez Two has some awesome bud production going on. She may need a watering soon as well. Anyway, the whole plant is covered as I thought it would be. The buds haven't even started to swell yet. It's just going to be that much bigger. Grow System Environment: Temp: 73.9° RH: 64.4% VPD: 1.01 kPa July 1, 2023 Zkittlez One looks absolutely amazing. Massive and still growing. She's nearly 30" wide. 24" deep. She is also 25.5" tall. I don't know if this is big for an autoflower, but I assume it is. It's the biggest I've ever grown. She doesn't need water yet, but at her rate, she may need another gallon tomorrow. I snipped off just a couple more leaves today, just opening air flow and bud sites. Zkittlez Two looks great as ever. I decided to finally pull some fan leaves. Just the main stem ones and a couple that was completely covering another branch or facing inward. She'll need a new reservoir tomorrow. My major concern is how much she is squished in the back. With the 4 plants in there and that one massive Zkittlez, the 2 vegging plants need all the light they can get, which puts this lady in the corner. I was honestly considering moving her to my dry Tent and popping the light back in there. Something else I noticed is the bud structure. They seem quite wispy maybe it's just how they form for now. But they are also really skinny. Especially the main cola. I'll have to keep an eye on that and see what I can do about it, if anything. Grow System Environment: Temp: 74.5° RH: 63.3% VPD: 1.06 kPa July 2, 2023 Zkittlez One is now officially in the flowering stage. I'd say 2 days ago, but now the buds are really forming. The top of the canopy reads out at an impressive 26.5" tall. 29" in diameter. More bud sites and tops that I'm willing to count. Just a lot. She's going to need more water first thing tomorrow. Maybe later this afternoon. She's super thirsty and that's a great thing. I've also managed to thin the whole plant out. Not a full defoliation, but a few leaves here and there for about a week. Now she looks near perfect. Zkittlez Two looks great! Still buried in the back and the buds are still pretty wispy. At least the ones up top. Lower bud production is fantastic! Big fat buds. I might have to drop the intensity very soon to save the main cola. She's definitely not as thirsty as Zkittlez One and I am still a bit concerned about that. She did however finish stretching at 29" tall. Grow System Environment: Temp: 73.5° RH: 62.2% VPD: 1.05 kPa July 3, 2023 I dropped the light intensity down from 90% to 80% last night. Zkittlez One was drooping about 4 hours before lights out. I read somewhere that too much light can cause that. So we shall see how it looks tonight. Zkittlez One needs more trimming I think. She looks great, but she has an 18" deep canopy and I'd rather give light to the whole thing. The top 5" are fine, but below that is a thick floor of foliage. I trimmed some of it away today, it I'm gonna need to continue for a bit. At least some for next 2 weeks. Every other day. Healthy is an understatement with this plant. She is really tall with the whole setup with bottom reservoir. 40" from floor to top. Impressive. Zkittlez Two is so stuffed in the wall, I feel bad. I might have to take her out and put her in my dry tent with a 100 watt light. That is still up for debate. It's an extra 100 watts of power I'd be using. However, the extra space will certainly give the whole plant more light coverage and produce better buds I think. I'm going to try and maneuver them in the current tent and see what I can do. Update: So Zkittlez Two was really squished in the corner. So I removed one of the smaller plants and moved Zkittlez Two diagonally to Zkittlez One. I also got to pull the 4 main side branches out for better light penetration. Grow System Environment: Temp: 74.2° RH: 62.7% VPD: 1.07 kPa July 4, 2023 Zkittlez One is still growing a bit I think. The grow light is only 18.5" above the canopy now. Where it should be at 22" I'll have to see what I can do. Doing great on water and healthy as ever. I did start a bit of pruning. The popcorn buds on the bottom of the canopy. I'm not cutting the longer branches though. I feel like that might cause more stress. But I'm going to pull off popcorn buds for the rest of next week and of course remove fan leaves as needed. Every leaf is super healthy, just in the way of air flow and light. Zkittlez Two is much better in the front of the tent diagonal from her sister plant. Much more space. And with the side branches pulled out, I expect to see much better bud development. She's still a slow drinker, but I'm starting to think it's the humidity that's preventing her from drinking more. This is an entire week or more of humidity and lack of the right equipment. So I'm really hoping I don't end up with bud rot or mold. I don't think I'll get mold because of the air circulation. But bud rot later on is very possible. Maybe not probable though. I don't know. I don't have much experience with it, so yah. Either way, the grow tent door will be kept open to keep the humidity at a kind of reasonable level. Grow System Environment: Temp: 73.6° RH: 65.9% VPD: 0.95 kPa
Likes
11
Share
@tangie
Follow
I have started flushing with pH-adjusted Flawless Finish solution, expecting to harvest somewhere around the end of this week, although I will continue monitoring pistils and trichs. Upd: Added back 50% base nutrients and some flowering additives after researching some of the first responses to my flushing question. I learn every day. Even that which was scientifically proven true one day, might be even more scientifically proven absolutely false some time later (not related to flushing specifically). Thank you kings! Upd 2: Okay okay I cooked her with some cosmic rays or whatever those Chinese quantum bars emit — purple rays, I'll call it — that's on me. Turned them 30% down to see what's up. Light burn was not on my mind, because otherwise the leaves were not really curving that much, considering that this is 3 weeks overdue wrt advertised. Sorry about that, did not pay enough attention.
Processing
Likes
3
Share
@Samithen
Follow
Took longer than expected with most of the seeds poping after 4 days.
Processing
Likes
8
Share
De vuelta familia, traemos esta semana y es que ya recuperamos unos problemas que surgieron por el trasplante(no les sentó bien). Después de trasplantarlas el sustrato no secaba bien los primeros días y se marchitaron 4 hojas, con algo de alimentación, esperar algo más entre riego y riego, solucionamos el problema y a seguir adelante. Ph controlado en 6.5 alimentando todo con la gama jungle y adicionales de advanded nutrients. Quitando esos pequeños quebraderos de cabeza, esta variedad es bastante sensible a la temperatura y hay que tener cuidado, porque marca muy rápido los síntomas. No obstante no quiere decir que sea mala cepa, si no tener algo más de experiencia y pericia. Es la única variedad que nos afectó algo la temperatura baja por la noche. Pero sin Serios problemas
Likes
3
Share
We are in the 16th day and these babies are developing very quickly.
Processing
Likes
25
Share
6/17 and 9/18 Were extremely hot days. Today to reached 98 with temps still currently in the 90s as I right this at 7:22pm. Watered morning came back to discovery the bags had dried out. I watered again and fed; 3tsp big bloom, 1 calmagic, 1 grow big, 1/2 microbrew, 1 tsp unsulphered molasses. 1tsp kelp me kelp you. Watered fed and lightly watered again. 6/23 Plants seem fine post BT treatment. Found a few dead moth larvae. Plants look great and I haven't seen any negative effects from BT. Weather gas continued into the 90s. I had been watering twice daily. After examining the medium I decided to not water today as I had hit them pretty hard the day before. Fed and watered same schedule except I switched out microbrew for kangoroots on 6/23. I was going to apply second application of BT but on examination I found Aphids on my smallest mendo breath. This plant is a mendo breath reveg and I've been worried about pests due to its density. I put out two aphid traps (I doubt it will do much since the are only nymphs) and sprayed with MiteX by bromide. Cottonseed, clove and garlic oil with sodium bicarb and a few others. If this doesnt work they are all getting captain Jack's.
Likes
Comments
Share
@Chucky324
Follow
Hello. This is the end of week 7 and the beginning of week 8 of veg. Got these plant repotted and watered. They are looking good. Plant #1 has a sweet cookie like smell to it. The other 2 aren't quite as sweet smelling. OK. Be Great. Chuck.
Likes
21
Share
@Bncgrower
Follow
We've reached the end of this journey, the result was good, a very good strain to cultivate, a little sensitive at first, but then it reacted very well. The buds had a very good aroma, dense and resinous, now just wait for the drying and curing process to complete the cycle.. ✌️✌️✌️
Likes
16
Share
@nijuana
Follow
Problem of the leaves are solted it was because the soil was working a lot because it is rich it needed time and multiple watering now it's good she is in love in this soil 💚 she will be transplanted soon outdoor