It’s the third week of flowering, and the plants are starting to show some exciting progress! 🌿 The buds have begun to build mass, and the first signs of trichome development are visible, giving them a light nice, frosty look. ✨ I did notice a few nutrient deficiencies on the leaves, likely due to underfeeding, as I’m using a medium with 50% coco. To fix this, I adjusted the nutrient levels, and the plants seem to be responding well. 🌱 The plant that wasn’t trained with LST is about a week ahead in development compared to the LST version, showing more advanced bud growth. Also, the smell is becoming more pronounced, with the first hints of that classic, sweet aroma filling the tent. 🍬🌿 I’m excited to see how things continue to unfold in the coming weeks! 😁✨

A selection of a few plants but you can tell the f1 hybrids are just amazing for growth got loads of bud site hopeing for fat buds now still a few weeks to

So I think we are on day 36!!-02/08/22😂 had a lot of things to do but we should be back on track with this diary and the new one!!! So they are a lot bigger than the first blue cheese I had grown! So today because they got so big I’ve had to take em out and put them under a tsw2000 in a bigger tent just while a organise everything! But they are looking amazing so far

Moin moin, Entspannte Woche gewesen.. - bedingt gegossen (50-100ml) (RootJuice) - Befeuchter bei Bedarf gefüllt „Wichtig ist immer destilliertes Wasser zu benutzen da sonst das Gerät verkalken könnte.“ - Controller auf 0,7 VPD Stellung

Plant 1 (84 days): 39,5g Got some pretty nice looking buds out of it, not very dense tho, left them to dry for around 12 Days, humidity droped below 50% during the day which kinda scared me but i think they turned out nicely Plant 2 (96 days): 65,4g Buds are way denser, removed the bigger stuff while it was still wet and trimmed the rest once it dried.

Week 5 : Colorado Cookies in Biotabs These have completely blown up, doubling in size, ripped up the metal hooks i had them in like it was nothing, they're liking the extra light, pushing out leaves and loads of flowering colas . i did take off one leaf that was throwing shade, but apart from that only LST every now and then to keep it under control and hopefully get a bigger yield. Mixed my beneficials with my micro, that's 14gs of powder for 900ppm , but i'm not worried because this is not "dangerous ppm" only some micro. They're starting to slurp it up : one extra watering a week that 3x 3 pints ! used some co2 enriched water only twice, i didnt dare put it in with the beneficials even though i know co2 as a soluble gas will not penetrate the cell walls of any of the organisms (that means it's safe!). I'll get some full frontal pics of the ladies next week, so get your lube out ! spraying twice with the micro and the kelp this week, not really following up on the co2 sprays because i eyeballed the first spray and now there's actually a bunch of residue all over the leaves, so gonna try and figure that out ! suggestions welcome ! 🚀

Ho avuto problemi di temperatura e si sono allungate, ora ho preso il climatizzatore...

Raised the height of the grow lights and highed the light output, threw all the autos into one tent for the time being as they love lfe in there over than in the cupboard! but ill get around to making the cupboard I have spare into a space to grow again. All.of the plants are doing great really, one purpe punch isnt doing to well im going to flush her then feed half the dose of nutes that i have been already feeding her. 💚🤘

Lst hat glaube was gebracht, also auf jeden Fall ist alles gut in die Höhe gewachsen, ich hoffe die anderen Blüten an den ehemaligen Seiten Trieben bilden sich auch noch schön, sonst alles prima

Es ist ist richtig kalt in der Garage ... die oberen Blätter sind immer noch hell - für mich aber kein kein unnötig zu düngen - die Aufnahme ist durch die niedrigen Temperaturen einfach nur gehemmt.

Привет друзья! Пол пути уже пройдено, полёт отличный😃 На 3 фото, левый куст TROPICANNA POISONZKITTLEZ XL AUTO Всем добра и мира

This week I did a fair amount of work on my grow. I did a bit of defoliation and spent some time tying down branches to shape the canopy. My goal is to get buds growing wall to wall! I can't wait to see the results of my efforts.

-Apliqué bio bloom powder feeding. - 3g x cada litro de sustrato,esparcido por la base,macetas de 6L= 18g.🤙🏻

Hello everyone, I've had a busy week, so this is what I have for you guys See y'all next week 🤘🤘

Okay so I’ve been slacking a bit on the grow-diaries, only because I’ve had a lot going on and also because I don’t feel obligated to do so because this isn’t a sponsored grow. It’s been nice to have a little break but I think I’m ready to come back at it full force again. These girls are living their best lives, they are all the same age and they are all thriving. Floraflex nutrients, as well as some Silica, Regina-root, and a trichome enhancer called “Grease”!! Seems like the real deal. Watering every other day and let me tell you these girls are very thirsty. Defol as needed! My new HLG Blackbird lamp fixture is out of this world. My 3 autos that you can also find in my profile absolutely blew up. I typically fit 4 autos in my 3x3 but now it’s essentially one Purple punch from Fastbuds and I had to cram 2 more inside basically because they are going crazy. Unfortunately I had to move them from under the blackbird and put them under a HLG350R and they are still going crazy. Basically what I’m saying is HLG Lamps=Crazy growth and amazing lamps!! HLG has a lifetime customer! That’s it for now but check in next week to see the progress! Thanks for tuning in. Until next time and as always, Stay Smokey my Friends!!! 💨💨💨 Instagram: Virginia_nugz_540 Sponsors: Horticulture Lighting Group HLG-Blackbird HLG-600RSpec HLG-350R Diablo (X2) Discount code: Virginia_Nugz Petra Tools LTPRO 2.0 Backpack Sprayer Trimbag Standard Trimbag Discount Code: Virginia_nugz Fastbuds Fastbuds Genetics Goat and Monkey Hydrokulture Store 4x4 Gorilla Tent

——————————————— WEEK 11 / DAY 72-78 BLOOM WEEK 4 / DAY 22-28 Mars Hydro FC-E3000 Floragard Professional GrowMix 11L fleece bags Light: 50cm Schedule: 12/12; PPFD: 1050umol/m2/s DLi: 45mol/m2/d 21° C - 65RH 3L per Plant Hesi Bloom Complex (4ml/1L water) Hesi Phosphor Plus (2ml/1L water) BioBizz CalMag (1ml/1L water) PH 6,5 Fan, extractor and pump ON 24/0. ———————————————————— •Day-72 / Bloomday-22 The fourth week of flowering begins. •Day-73 / Bloomday-23 The plants were each watered with 3 liters of water with fertilizer solution. They were also defoliated a little.

This was an interesting harvest. Everything was going great and the buds/trichomes were still piling on, when suddenly almost overnight plant "C" shifted to about 20% amber trichomes. So I harvested it, and because the other plant wasn't ready yet I decided to try water curing the first one for 7 days. Then at the end of the 7 days, I figured I'd hack down plant "D" and dry them both on the racks in the tent at the same time before moving into jars. The water curing was a huge success! After the first day, the water was cloudy with a slight green tinge. Second day was about the same. Then the water was just a little cloudy each change, no green tinge. Compare it to the diary I just opened around water re-curing some cannabis I bought from the government store, where the water is diarrhea brown :O On day 7 of my water cure, the water was perfectly clear so I decided to hack down plant "D" and get them both drying on racks in the tent together. While water-curing plant "C", I had its trim sitting in a bowl in the freezer. When I hacked down plant "D", I put its trim in the same bowl. After my typical wet-trimming, I hung up Plant "C"'s water-cured buds on the top rack, plant "D"'s buds on the 2nd rack for an old fashioned cure, and random trim from both plants spread out on the bottom 2 racks. The water-cured buds dried within about 24 hours and went into a jar with a 58% humidipack. The buds are SUPER dense and potent! Nice clean high, doesn't kill my throat. The downside is that the taste is really weak and not that great. But everything has pros and cons. Almost no trichome loss in the bucket during the water curing as well -- I was really worried about that! The other buds dried in about 36 hours and went into a jar with a 58% humidipack, where I burped it many times a day for a week. The smell and flavour are much more potent than the water-cured bud and it's a little harsher on my throat, but otherwise I'm not sure there's a detectable difference. However, you can SEE there's a sharp visual difference between the water-cured buds and the jar-cured :) Of course the jar-cured will mature more with time as well. Once the trim was completely dry, I put it in a bag in the deep freezer and dropped it to about -20. I didn't need to use a grinder this way -- I could just mash it all up in the bag with extreme ease! Sifted it through the kief screen, and pressed down 17 grams of lazy-man's hash! After processing the trim through the kief screen, I decarbed in the oven at 200F for 1 hour (this converts THC-A into THC or something to that effect -- if you don't do this, the edibles won't get you very high). I put the trim into a big mason jar and back into the freezer along with my bottle of Everclear. Once they dropped somewhere down around -20, I poured in the Everclear, put the lid on, and shook as hard as I could, as often as I could, for 5 minutes or so. I noticed that as I shook it around, the contents inside would alternate between solid and liquid which was kinda cool :) Shake it one way and it freezes, shake it the other way and it thaws... or something to that effect, anyway. I was able to use a double-coffee-filter to extract about 2 cups of dragon tincture! I threw everything in the coffee filter out -- next time I'm going to do a better job of it as there's a little pile of trichomes that forms at the bottom of the filter which I could put to use. Once I get that down next harvest, I'll have around 99% efficiency milking every last drop out of my harvests! White chocolate is so yummy, as are candy canes... I wanted to combine the two to make some edibles. Looking around for candy cane crush, I decided to check out Amazon. They had the same candy cane crush I was looking at from popular stores, for only a couple dollars more, so I figured sure why not have it delivered. I was planning to get some white Baker's chocolate, but on checkout of the candy cane crush I got a deal for adding on white chocolate Lindt bars for $1.25 a piece LOL! So I bought 10 of those. When the Amazon package arrived, I slowly boiled down 1/2 cup of my dragon tincture in a pot, then used a double-boiler setup to melt down 4 of the Lindt bars in the same pot. Once it was mixed well with the hash oil, I set it aside to cool for about 3 minutes before stirring in 1/8 cup of candy cane crush (plus I ended up adding maybe like a tablespoon more), pouring into a pan lined with parchment paper, and putting in the freezer for 30 minutes. So now I have a nice big chunk of white chocolate candy cane crunch stuff where a piece the size of my thumb gets me super high for like 8+ hours; 17 grams of lazy-man's hash; and 88 grams of bud :) And still enough dragon tincture left over to make 3 more rounds of edibles -- not sure what I'll make next! From now on I'm going to water cure a large portion of all my buds -- not just the ones I grow myself, but ones I buy from the Gummint too!

G13 autoflower is just about done. Lots of cloudy trichromes, and just starting to get a few amber ones. Next update will be the harvest. She grew well under the Medic Grow Mini Sun-2, in the Athena blended line nutrition. Considering the issue I had when she was a young plant. She is full of frosty colas now. I am just on the final wait now. I will likely put her in darkness in about 4 to 6 days, then cut her after 48 hours darkness. Thank you Medic Grow, Athena, and Weed Seeds Express. 🤜🏻🤛🏻💪🏻❄️ Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Die Blüten werden schön schwer und bunt. Das Wetter stellt sie auf die Probe und fordert Opfer.

Cracked a few stems, twisting them 2, 3 points in the main stem and once on each lateral stem, very early monstercropping, cracked the stem without rupturing xylem or phloem channels, minimal recovery, maximum stress and response. There is a new need for significant reinforcement. I know this knuckle will eventually require the throughput of a superhighway. No point in dilly-dallying. Growth grinds to a halt, at least it feels like that. Energy is now distributed fairly evenly to each stem at equal heights and equal light intensity. Growth is not slower; there is just far, far more to do all at once in equal measure, start raising her soil EC up to 1.0mS/cm and maintaining. Upped to 40DLI for now. Temps back in the daytime 87+ range. NPK Raw Grow to keep the soil water solution at 1.0ms/cm, thereabouts. Enzymes and amino acids are applied foliarly to the underside of leaves each night 🌙. Aim to coat the undersides of the leaves where the majority of the stomata are located. Use a spray with smaller droplets to increase the surface area of the leaves that are covered. Adding a surfactant to the mix can help the spray spread better on the leaf surface, improving absorption. Just remember not to add anything immobile.. Heat denatures enzymes. "blah blah what's the point? It's hardly going to do much." Plants have a surprisingly low photosynthetic efficiency, typically converting only 1% to 2% of the total solar energy that hits them into chemical energy. (Too much defoliation and high VPD all night). In fully optimized conditions, that rises to 6%-8% efficiency. Plants may use approximately 25% of their respiratory energy (50% of total respiration) for enzyme turnover, which includes production and repair, but the exact energy cost for heat damage repair is not specific, as the total respiratory energy is not definitively given for plants. Plants generally have a high protein turnover rate, with enzymes making up a substantial portion of this turnover. 10% total ATP is photosynthetically processed. 90% total ATP is processed during cellular respiration. 25% -50% total respiratory energetic output is spent on enzyme turnover (Ballpark). Sounds like it's worthwhile to me. The longer you have waited, the harder you must swing.