Buds getting finaly bigger... The Color is just amazing! Two little videos. Gave her a little tent cuz it’s getting way too cold now

08/20/2020 Soil temp a little warm,it is hot and humid going to water her good,and mulch the topsoil. Flowering has started!

These are some amazing genetics they just keep getting Frosty or every week every day more and more trichomes

10/🤪🤪🤪🤪

En cette première journée de la semaine j'ai bien arrosé mes filles de leurs mélange favoris. J'ai donné beaucoup d'amour à mes filles en cette journée de St-Valentin ❤️

June25:🤦‍♂️🏿🙆‍♂️🏿🤷‍♂️🏿 June27: the lizards have attacked again... for this... today we are going to raise the girls and place a mesh June28: I have no idea how they did it... but they got in again!

14day

Un jour je vais avoir un endroit bien isolé pour lui donner les meilleurs conditions. Malgré tout elle est quand même impressionnante ❤️Divine Seeds

Im not a soil guy but im happy this plant got such huge rockhard buds i didnt expect result like this in just soil, i fed her maybe 4 times during flower only.

Week 10 (3-4 to 9-4) 3-4 Temperature: 22.5 degrees (lights on) 19.3 degrees (lights off) Humidity: 64% (highest) 59% (lowest) 4-4 Temperature: 22.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 66% (highest) 59% (lowest) 5-4 Temperature: 23.4 degrees (lights on) 20.1 degrees (lights off) Humidity: 64% (highest) 56% (lowest) No pictures. 6-4 Temperature: 24.4 degrees (lights on) 20.7 degrees (lights off) Humidity: 64% (highest) 55% (lowest) It looks like the plants are doing better since they havent got any water the past couple of days. Today i decided to heavily defoliate the plants. I also found a old feeding schedule from Green House with PH values, and it recommends that i should give an PH of 5.7 on coco. I thought PH 6 was good, but i was wrong, maybe this in combination with the plants being too wet, is the reason for the weird growing leaves, and the problems they show. I cleaned the reservoir and made sure there is no old water in the lines. I made a full strength 10L feed, and added it to the reservoir. I turned the reservoir on for around 3 mins, just to the point that the AutoPot trays are full of water and the valves are shutting them off, then i turn the reservoir off. I will do this every other day, so 1 time in 2 days. 7-4 Temperature: 25.7 degrees (lights on) 22.1 degrees (lights off) Humidity: 64% (highest) 50% (lowest) 8-4 Temperature: 26.4 degrees (lights on) 22.4 degrees (lights off) Humidity: 64% (highest) 55% (lowest) Today i turned on the reservoir for 3 minutes again, just till the trays are full of water. 9-4 Temperature: 25.9 degrees (lights on) 21.2 degrees (lights off) Humidity: 60% (highest) 51% (lowest) No pictures.

******************************************** Week 6 Early flower (week 2 flower) ******************************************** Light cycle=12/12 Light Power=75w 31% Extractor controller settings (during lights on). High temp= 26c Temp step=0c High Rh= 58% Rh step=0% Speed max=10 Speed min=1 Extractor controller settings (during lights off). High temp= 20c Temp step=0c High Rh= 60% Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=9.00am Radiator on= -19.0c Radiator off=+19.5c Smart controller settings (during lights off). Lights off=9.00pm Radiator on=-18.0c Radiator off=+18.5c VPD aim=0.9-1.3 DLI aim=30-35 EC aim=0.8-1.5 PH aim=6.0-6.5 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 NPK= 10-10-20 Method= Automatic Feed= Flower nutes Neutralise=0.1ml/L Katana Roots=0.2ml/L Plagron bloom=5ml/L Plagron Power buds=1ml/L Easy Ph down=0ml/L (1ml=24 drops, 1 drop=0.04ml) Easy Ph Up=0.083ml/L (1ml=24 drops, each drop is 0.04ml) Ec=1.35 PH=6.4/6.3 Runs=10 Run times=3mins (0.7L/0.35L each) Gap times= 17mins Total runtime=30mins(7L/3.5L each) Total flowrate= 0.233L/min(0.116L/min each) Auto start time=10.00am Auto stop time=1.03pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅15/3/25 Saturday(Day 36) 📋 📅16/3/25 Sunday(Day 37) 📋 replaced batteries in wifi temp/humid sensor. 📅17/3/25 Monday(Day 38) 📋 📅18/3/25 Tuesday(Day 39) 📋 Small defoliation and leaf tuck. 💧 Automatic Flower nutes Ec=1.35 PH=6.4/6.3 Volume=9L Volume left=2L Volume used=7L(ml/min) Volume each=3.5L(ml/min) Runoff. Total runoff=L Ec= PH=/ 💧 📅19/3/25 Wednesday(Day 40) 📋 📅20/3/25 Thursday(Day 41) 📋 📅21/3/25 Friday(Day 42) 📋H=38cm D=26cm Dli=28.4 PPFD=657 Raised light, increased power to 100w H=38cm D=39cm Dli=26 9 PPFD=623 ******************************************** Weekly roundup. 📋 That's the 2nd week of flower finished, she hasn't really stretched that much, about 13cm during this week. She's nice and bushy, looks healthy so I'm saying this was a good week. Back soon. Take it easy. ********************************************

Kommen jetzt langsam in die Wachstumsphase. Beginne leicht mit 2ml pro Liter Root juice. Hauptlichter auch an, aber mit 50cm Abstand. Update 15.12.2020 Sie wachsen alle sehr gut.

they all made it through the nasty summer heat. now the weather has changed here in California let's see how theese girls bloom

fat dense buds numerous and fuzzed out with trichomes. leaf-calyx ratio on point. Stalks tended to lean as flowering progressed so plan for some manner of support if you want. Let her flower as long as she can and she’ll reward you.

Day 21 of the Auto Fractal on this plant will not do topping as she stayed a bit short for now but will do LST.This week will add more the ppm as soon they start flowering.

Begging to streaky in flower very bushy plant and the leaves are very close together got to be careful during defoliation letting her stretch to get a better defoliation

And the winner is….. Divine Kush! To say the least, she fought the most and she really shined through. If you see the video above 👆 you can see how wowed we are by her, not only because she sprouted her own seed within herself but also because it shows how much moisture she had to deal with and she sort of found an interesting way to disperse of it! We did try to plant her seedling but unfortunately it did not survive but we are still in awe of it happening before our eyes. Nature is amazing and Our Kushy girl is very much appreciated, she has taught us quite a bit this year. WOW 🤩💚✌️ Plz note, we totally forgot to weigh her.

COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

She was a pleasure to cut. Beautiful trim. So far pure berries and gas. I'll update on the smoke report once she's cured. I had a mini toke sesh earlier and it was definitely LSD. Definitely turning on some different visual/auditory receptors. It was nice and long and happy. She's only going to continue to get better. The buds are kind of fluffy but I find that all the purples I've grown turn out like that. The greens tend to produce much more weight/density. I'm not one to harp on density. I'm more about the flavor/effect.