So this is the end of week 2 flower and these girls are now be entering week 3 with all being fine and healthy these girls are on the stretch 🌱 Ni issues as of yet allthough I did have too move these girls too another property for safety and they have handled the move well with no issues. Drinking alot now in their coco especially the wedding cheesecake girl where as the 2 orange sherbet at the back are very happy slowly plodding along, on the stretch too as can see. Scrog did help but as moved these girls it's a few inches tighter so more colpacked but will be lollipopping and defoliating all the scraggly lower bits through this week 3. Starting too get that hint of smell now too definatley from the orange sherbet I can tel 😍 Stay blessed see you next week 💚

I will continue to update once they are dry and ready for cure . I have cut down in jar everything the wait was 114 grams please consider that when it comes to my weight I wait until the main stem breaks with a loud crunch and the buds are really dry to the touch reason for it I have a very busy life and at the end of the day this is just a hobby so I cannot be opening those jars many times a day at most one in the morning and one in the night so I want to avoid mold on them so I push in a Boveda pack to keep them nice . I will update with flavours and other details once I try it I've I have been smoking a different strain that I will review today . After 4 weeks curing in jars the smoke it is very smooth very nice taste like tropical citrusy with a hint of skunk buds are very smelly and hybrid density to them very enjoyable to have . thank you for reading have a happy grow

Smells like Blueberry...so fruity

Solo un riego mas con abono y hago lavado de raíces..:D

Day 64 (2020-07-12): Watered at 5.8 PH Day 67 (2020-07-15): Starting flush of CBD Crack. Water only @ 5.8 PH. Continuing to feed G14 for another week. 5.8 PH. Day 70 (2020-07-18: Continuing flush of CBD crack, water only at 5.8. G14 gets the same MC dose @ 5.8

Kings Juice and CBD compassion are developing a nice odour. The Kuchi Diesel is developing a nice diesel scent with a shrubbery type branching, buds all over. The milky dreams is growing some popcorn buds full of trichomes. Jack Lemonade is nice long buds full of trichomes. The moweeto has a particular indica aspect in the leaves grows like a hemp plant and has nice bud development. Gorilla CBD is developing like a shrub, with bud sites all over.

My beautiful prince's is looking even better now that she's not having to deal with those freaking fungus gnats that were eating all the roots of my plant, I've got rid of them just by watering with a nematode called steinernema feltiae if you're having or have had the same infestation just apply predator nematodes like steinernema feltiae guys!

Day 15, having a right week of it!!! Thought I was on top of the chlorosis (Thinking Ca/Mg issue) and then I start getting issues that make the plants look like they're getting N Toxicity!!! Now, in all fairness, by fixing the Ca/Mg issue, I may have created an N issue - My CalMag does appear to have N in it - @Shogun any helpful ideas here for me please??? :) What getting me is plants are drinking (Not massive amounts, but they are drinking), EC is staying stable and have standard pH drift of about 0.1/day towards neutral, this should be bang on. Roots are good as they're popping through bottom of the root pouch/air pruner pots (These are 12L each so a number of roots are over 6inches long this would mean) and growing into the run off water (I may mod my Wilma and make it a psuedo bubbler too but then this may cause all sorts of issues with my expected water volumes, etc.!!!). Wondering if anyone on here has had issues with either wind burn (From a 7" oscillating fan) or seen low humidity issues in veg that could maybe help? I am going to grab a humidifier for the tent (Should be here Wednesday) to see if that helps (Liberally spraying the place with pH adjusted water, added open water sources to the tent, etc.). Also, with the roots popping through, may grab some Sensizym to clean up dead root material & fulvic to ensure no salt build up round the roots. As I am stumped by what I am seeing (Things seem to contradict each other), I ran 2L of pH adjusted water through each plant on Sunday 30th and held of feeding to ensure salt build-up wasn't happening in the clay, round the roots. This has topped the tank back off to around 50L, brought my CF down to 10 (1ec) and I dropped feeds to 3 per day (15mins after lights on for 15mins, 1 in the middle of the cycle and 1x15 near lights off). The fact there was no EC upping with such a small amount of water, again makes me think the "Nute Burn" isn't caused by the feeding and possibly by humidity (or lack there off - it can get down to 35% in there). I know it goes against all the SOP's, but in general, the air coming out of my tent is cool; It does go into the main room where the tent is, but is a large cabin and has the door open most of the day with kids running in and out of the other room (I have a security gate to keep them out!!! :P Also, the airflow crosses my ballast, keeping it cold to the touch); until the humidifier arrives, can i recirc the air back into the tent to up the humidity? I have a dehumidifier in the room (On but set to 90) to check the humidity in the main room and it is creeping up (Was at 63% there when I was re-doing LST while tent was at 44%). My lights on period is 4pm to 10am but don't want to turn the fan off as the tent is beside a SW facing wall so is getting heat for a couple of hours before Sundown (around 9pm now). Or, would it do much damage to change to 6pm to noon for lights on? Don't want more of a shock to their system as they've settled into 18/6 from a 24hr under CFL at seedling. Again, anyone who sees this and may be able to help, please do! Day 19 and 21 added

All good. Time to flush maybe?

Wow the smell! ghost train smells like a citrusy diesel and the pineapple is getting more of an acidic fruity aroma. they are finally starting to put on some size closing in on the end of week 4 flower, next week i will step up the nutes. I defoliared the bottom 50% of the plant now that it seems to have finished stretching, and removed any big fan leaves blocking the better bud sites. i couldn’t ask for a better first grow so far!

week 3 is a tough rn not gonna lie shes yellowing extremely fast and shes begging me for potassium. i was just giving her 2 tsps to 3 gallons of water. as of today (jan 8 2022) i gave her a feed of 1 and 1/4 bloom and 1/4 veg nutes to try to fight the yellowing. i honestly dont know if that was the right thing to do most threads i read just said to add some nitrogen but idk if dyna gros bloom and grow are meant to be mixed. especially this late in flower. either way its too late i already gave it to her i guess now all i can do is wait and see what happens. you can see how fast the yellowing is happening too.

🚀 4 clones de Blueberry Pie F1 Fast seleccionados por @stacksfarmz - https://www.instagram.com/stacksfarmz/ 🚀 Breeding by @seedsmangenetics - https://www.seedsman.com/eu-en/blueberry-pie-f1-fast-feminised-seeds-sman-blpi-fast-fem 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp

9 weeks 5 days

Everything is looking good. Gave these girls a shot of recharge and fish shit. Prepping there new homes and getting ready to transplant.

This week went real great , one has been getting flushed and the rest we will start flush Tomorrow! These ladies are doin so amazing! Hope you all enjoy !! Stay tuned for next week! Cheers an happy holidays!

Beim Training ist mir der Stamm unten eingerissen.. denke aber der Kabelbinder macht das schon :D sollte nicht weiter schlimm sein.

Overall, I am extremely happy with the genetics of the Auto Euforia and the general success of the grow. I always like to reflect on mistakes I have made, so let me lay them out here: I overlit the plant during veg, contributing to it's bushy nature. It grew well but this would be a waste of electricity if I was growing more commercially. During the last week of flower, my region of Ontario was hit with tons of rain and humidity. I took some steps to increase circulation of dehumidified air, but lowering 95rh to 65-70rh is still insufficient and I lost some control of the environment. The awful result was the start of mold in some select areas, particularly in the fattest buds and where leaves were cut away and petioles remained. This issue is not due to Dutch Passions great genetics, and is entirely due to a combination of an unseasonable environment and my own overconfidence. This mold was never clearly apparent on the outside of the buds, but I found it will trichomes scouting under magnification. This forced me to speed up the harvest and drying process. It also means that I have had to carefully grade the buds into those safe for smoking and vaping, those mold free but needing a second examination (will be rosin pressed), and those close enough to spots of mold to be only for for edibles. Any moldy bud was of course cut away and will be disposed of. Nevertheless, I have many ounces of fantastic buds, and will be making some nice pressed rosin based 510 cartridges. I will edit the harvest post with more information after the cure, and showing the various processing I will be doing. Happy growing! 🌱

THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Big