Very good. Decresing the humidity to 45 %

Wow..week 8. Shouldn't she be flowering by now? She's doing a lot better, her leaves are green again and she's growing. I'm proud of her. added some co2 to the tent, I'm curious to see what happens. Day 60.... I'm bringing back her to life. 😊. Day 63 I believe she's alive with all that green

Nearing close to the end. Really regret not using the scrog net as they’re struggling to hold themselves up as they go through their final swellings on the buds. Smell has changed and has a candy sweet at the moment starting to come througH

-------------------------------------------- ~DUTCH PASSION OUTLAW AMNESIA~ -------------------------------------------- Outlaw Amnesia is a top quality old-school Amnesia Haze dominant Sativa that will appeal to both beginners and connoisseur growers alike. She is 80/20 Sativa/Indica with around 20% THC and is a cross of our Super Haze with a very special clone of Amnesia. The high is powerful and fast with a clear uplifting sativa high and a strong Haze accent. The taste is fresh, sour, strong and old-school Hazy. Outlaw will stretch more than most, she can triple in height during bloom, and grows well with the SCROG method. Although she can be harvested as early as 9 weeks, a full 12 week flower period may be required for best taste, yield and high. She grows well in all grow mediums with perhaps the best yields in hydro where yields of up to 500g/m2 are possible, classifying this as a high production variety. *description credit to Dutch Passion OUTLAW AMNESIA (DUTCH PASSION) FEMINIZED DATA SHEET Breeder: Dutch Passion Genetics: 20% Indica / 80% Sativa Parents: Super Haze x Amnesia Flowering Time: 11-12 weeks THC: 20% Yield (Indoor): 450-500 gr/m² Height (Indoor): 50cm Available as: Feminized seeds Flowering Type: Photo-period Sex: Feminized *Specified by breeder when grown under ideal circumstances -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- THE SETUP: ~Planted into Jiffy Peat Pellets that were hydrated with de-chlorinated water with SuperThrive added then ph'd to 6.0 @ 80℉ ~Grown 100% organic in 10g fabric pots with Mother Earth 70/30 Coco/Perlite medium amended with 2tbs/g of Down To Earth 4-4-4 / 2 cups/g of Earthworm Castings / 1tbs/g of Dr. Earth Flower Girl 3-9-4, 1tbs/g of Dr. Earth Bat Guano, 3/4 cup of Down To Earth Azomite and 1 tsp/g Down To Earth Fish Bone Meal. ~24hr light cycle during Germination / 19/5 light cycle for Vegetation and 12/12 for Flower ~Straight water ph'd @ 6.2-6.8 when needed and weekly Compost Tea's. __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ WEEKLY UPDATES: 9/27- Week Seven of flower here we go! She's looking good to go with her flowers stacking and her trichome production continuing to coat her flowers! Today she was given 1.5g of de-chlorinated water which was ph'd to 6.2 @ 72℉ which I gave her half through her drip pan (bottom chuggin), the remainder trough the medium. I also gave her pot a 1/4 turn. 9/29- Yesterday I didn't water her, only turned her pot and checked her over... Wow! She's really ramping up the trichomes making her flowers look like their sugar coated! 🤩 I watered her today with 1.5g of de-chlorinated water with 1 tsp/g of unsulfured molasses added which was then ph'd to 6.4 @ 72℉. The molasses will give the microbial colony some additional food as well as supplying micro-nutrients to the plant. I finished out the daily maintenance giving her a check over and turning her pot 1/4 turn to ensure she gets light to every inch of her. 10/1- Yesterday was a 'no water' day as her pot was still fairly heavy to lift. Today she was watered with her usual of 1.5g of de-chlorinated water which was ph'd to 6.2 @ 72℉. Her flowering continues to impress me with her trichome production covering her flowers with 'frost' she's a sight for sore eye's! 😍 She's looking to be on track for a 11-12 week finish and will be an epic cultivar when she's done! 10/3- With Week Seven coming to a close we've got 4-5 weeks to go for this lady finish and she's right on track, looking like a Rock Star! 🤩 I watered heavy yesterday and added 1 tsp/g of Unsulfured Molasses to the 1.5g of de-chlorinated water which was then ph'd to 6.6 @ 72℉. Her pot had some weight to it when I checked today so I'll skip watering her until tomorrow. I finished up today by checking her over and giving her pot a turn. ~Thanks for stopping in! This epic run will be wrapping up in the coming weeks...Stay lifted and be Blessed! 😎🙏~

This first week was setup preparation for grow an finally planting seeds in soil. I have had a lot of success with pre-soaking seeds in 50/50 hydrogen peroxide distilled water for 24 hours. Then planting directly in soil in the size pot they are staying in due to autos not liking transplant. Seeds were soaked for 24 hours and planted 1/4 inch deep in Fox Farms Happy Frog Top dressed with Ocean Forest in 5 gallon Fabric Dirt Pots I left them in the dark for 3 days then turned lights on 18/6 cycle five days later plants are starting to pop up Gorilla glue and Grapefruit are the first to start. Day 6 all seeds but one grapefruit germinated I expect by end of day today or tomorrow it will pop up started spraying seedlings with liquid seaweed diluted in a spray bottle. Trying to get more light having shipping trouble. Last grapefruit finally popped up day 7.

Auto Purple Hulk Auto by MSNL Outside 👉Sponsored Grow👈 W3V3 7/6- 7/12 I decided to grow Purple Hulk outside as MSNL indicated that it has a higher resistance to humidity than White LSD so I’m switching my plan. Cayenne came to inspect to see if the plant was big enough to go outside. In making the determination he snipped the tips and Ripley came and gave manger approval. I’ve changed the grow from inside to outside so hopefully the statistics reflect the change. I am giving water only for this grow unless deficiencies are noted since Supersoil is in my base mix. I will add Green Sensation during the flower phase. As always, thank you all for stopping by, for the likes and most of all growers, love and support. Stay green, growers love 💚🌿 💫Natrona💫

Ladies, gentlemen, and all the wonderful beings following this journey, I am thrilled to announce that we have reached the highly anticipated harvest week for our beautiful PCRs. This has been an incredible journey, and now it's time to reap the rewards of our hard work and dedication. The PCRs are nothing short of perfection. Their frost-covered buds are a sight to behold, glistening like they've been kissed by winter's breath. The trichomes are abundant and sparkling, making these ladies look absolutely stunning. The aroma is intoxicating, a true testament to their strong genetics and the care they've received. Upon taking them out of the tent, I was amazed by their strength and resilience. Despite my best efforts to make them dance, these ladies stood tall and proud, requiring no support at all. This just goes to show the exceptional quality and sturdiness of the PCR strain. Aptus Holland's Enzym+. This product is a game-changer, breaking down dead root material and turning it into usable nutrients, ensuring our soil remains rich and fertile for future grows. Speaking of which, I do plan to reuse the soil, thanks to the amazing benefits of Enzym+. This enzyme product not only helps with nutrient uptake but also keeps the soil ecosystem healthy and thriving. Here's the final stats for this week: TDS: 130 PH: 6.8 Temp: 21°C A huge shout-out to Aptus Holland for their incredible products that have consistently supported my plants' growth and health. Also, a massive thank you to Art Genetix for creating the phenomenal PCR strain that has brought so much joy to this grow. To all my fellow growers, followers, and the entire community, your support and encouragement mean the world to me. This journey wouldn't be the same without you. As we move forward, let's continue to spread love, positivity, and the joy of cultivating these amazing plants. Stay tuned for the final results and more updates as we dry and cure these beautiful buds. Until then, keep growing, stay positive, and never stop believing in the magic of cultivation. Peace, love, and happy growing! Genetics - P.C.R. @Art_Genetix_Team https://artgenetix.world/ Nutricion @aptusholland https://aptus-holland.com/ LED Power @Lumatek and @viparspectra As always thank you all for stopping by , for the love and for it all, i fell blessed to have you all with me for one more love journey Thank you Thank you Thank you , you guys are great and have been amazing , thank you for everything ! #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dogdoctorofficial #growerslove
 With true love comes happiness , Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so ! Friendly reminder all you see here is pure research and for educational purposes only Growers Love To you All Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT5-DOG 15% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off Have a fantastic week!

Similar conditions as last week, but the plant is getting bigger, so is drinking more, I was finally able to feed the plant 2 times in one week. This week I also introduced a foliar spray. I applied the foliar spray 1h after the lights turned off, next time I need to give it a bit earlier, right after the lights turn off. I also used Mycorrhizae this week as well I feel that the initial problems that I had been solved, the plant is growing at a normal pace now. DAY 30 - Water PH - 5.80 PPM- 531 Solution Temp - 22 Watering Volume - 2L DAY 33 - Nutes PH - 6.02 PPM- 1600 Solution Temp - 21 Watering Volume - 1.2L Foliar Spray PH - 5.21 PPM- 1450 Solution Temp - 21 Watering Volume - 100 ml

Hey guys, The week went pretty smoothly and flowers are starting building up. I'll soon introduce Bloombastic for 10 days, increasing from 0.5 to 1.5 ml per liter. Other than that, this phenotype are bringing out some gorgeous color, and they are starting to smell. Now she's finally alone in the tent so I hope she will build up a little more. For now, thats all lads. Stay tuned, stay high!

Fertilizers: Plagron Power roots, Pure zym, Alga bloom, PK13-14.

First one of the 3 adopted by dad later look like its getting to harvest. I am so pleased with my autos. I know that there are f one so that means that there are finicky and need to be grown by skilled people.But I feel like there's a high ceiling for my bred strains!

Taking the top fan leaves so the sides can catch up to the main stem. Will repot next week.

Day 14 Flowering: hi all. We have had another very happy week growing with these ladies from Zamnesia. The size and shapes that they are now formed into look so like cabbages with nice thick , green and bushy branching in all of the pots now. Training has been a battle with them pulling the legs overnight and needing re staking further out to keep them flatter. The canopy itself is forming up nice now with the strongest tips being the ones hitting the top now. Once stretch has done, I will be defoliating to feed the lowers that are dying to get involved with the thick supporting secondary branches everywhere. All 3 of the Amnesia haze are thick leaved, monster fanned and chunky stemmed beasts. I am glad I trained them lower as the growth could have easily become a concern in heights for sure. The huge cabbages that have been created now are perfect for a strip out soon to get light to the stems as much as possible #1 Amnesia haze f.i.m girl is by far the thickest Bush. She does have a really nice crown on her too with some serious side growth fighting out of the shadows and creating their own mini plants it seems. It will be good to get to what is her actual contenders as she is so thick with growth , it is hard to tell how many mains will be joining the fun. #2 Is also a great size to work with and will produce some nice yield #3 is a similar size to #1 and has been easy to work with too they have been lifting the pegs easily as they grow each day now so I will be using wire soon to secure them for the final push. Both of the Girl scouts cookies are very productive with growing tips. #1 is a slightly different pheno i think and has a slight darker green to her too. Growing in a nice thicket so far but has been pegged along the way too. Her sister #2 is totally different in her structure with an absolute flurry of bud sites dude to the training out of her throughout. She is like a mini manifold of sorts with all that usual popcorn rubbish being able to share more light. I dont expect huge colas with this and from her general limb thickness but i think she will be filled with decent medium sized nugs. They do both need a defol soon to really give all the nodes a chance go shine. I am planning to do some this week and the last bits at around 21 f. All told they are really looking like a great yield already so with a little more training before I let them get on with it , could be the best run yet !! UPDATE###### Day 15 and i did a defol today. This will allow all those growing tips to find the light. Next few days will be interesting as they recover and get busy.

Day 49 - Still giving the ladies just PH water with no nutrients trying to see if I can fix whatever is wrong with them😅 All in all the White Widow & Orange Sherbet plants I took individual pictures of are growing great & should have a pretty nice yield! Thank you for following & make sure to check back for daily updates! Happy growing friends!🌱✌️🏼

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This week I Supercrop all the plants and spred them out over both lights. One more week of Veg and they are ready to explode Check me out on Instagram @growmorestressless

15.07.25 day 50