As of this week I can see she's finally recovered after all the stress I put her through (HST, topping, LST) On August 1, watered it 1300ml, ph of the solution was 6.44, I added rhino skin 1ml and 1.3ml each- cal mag, bio root and biothrive grow. Had some run off but she sucked it all in, in less than 5 minutes I barely had time to measure the ph of the run off which was 6.72. Planning on transplanting it this week to a 5 or 7 gallon pot, she's currently in a 1 gallon pot. August 2, watered it 1L, ph 6.46. Added 1ml each- rhino skin, cal mag, bio root and biothrive grow. 6.77ph of the run off, (barely had any, she sucked it all in right away) August 3rd transplanted her to a 5 gallon pot and watered it 1500ml water ph 6.45 Added 1.5 ml each- rhino skin, cal mag, biothrive grow and bio root. No runoff. August 5th, watered it 1800ml water added 1.5ml each- rhino skin cal mag, bio root and 1.8ml biothrive grow August 6, watered it 3L water, 6.45ph Added rhino skin 3ml, cal mag 2.5ml, bio root 3ml, biothrive grow 3.5ml No run off

I topped every bud site on every plant, both indoors & outdoors. This one's staying nice & short for me. I can't wait to smell her beautiful aroma when she is in flowering.

Sorprendente questa gorilla 🦍 cookies 🍪 tra poco la testo e vi dirò com'è...,. Sicuramente gustosa e forte...

Going nice;))))

Defoliation on day 45, smells like tangerines

New week for the Chocobang 🎶🎶Look at chocolate salted buds stick in your bong and smoke it 🎶🎶 I think the Chocobang needs couple days more then the rest but it's going great there at a size that adding extra nutrients is waste and only making flushing take longer so starting to lower all nutrients and preparing for last week exited times Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Week 2

Reviewing the plants i noted some small dots on the leaves which looked like typical bites from mites, so i sprayed some spidermite and we placed around 6 spical ulti-mite bags to prevent any further damage, lets hope it dont get worse but i think I've detected them just on time 😁 For the rest the plants are looking good, the buds are getting bigger and more thc is being produced 😁 we still have around 4 weeks to go 😅

Time to flush this plant!! Harvest approaching soon.

week intel: its time for second pruning they grew up too fast and need second pruning as below : first i remove big fan leaves and only leaves then let them rest for 1 day then the second part of pruning will get done that is removing branches based on these conditions: 1-if the branch is very low and never can make it to the top , 2- if branch is in shade even after pruning fan leaves , 3- if there are too many branches at the small space then non of them will get resources so if there is no space for branch then , they must get remove. everything is perfect! stresses : pruning big fan leaves and lower branches + a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 884 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 325 ppm - 0.6 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 213 ppm - 0.4 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : no more stresses from now on till the end and from next week i'll reduce the amount of nitrogen and calcium to below half to the end.

New week for the 3th grow It's getting along very nicely must say one is looking better then the other and it's mix bags of sizes to worry about but other then that no troublesome issues what so every Next week going to lower the nutrients and be going into overdrive for next 2 weeks and probably be flushing some after 3 weeks Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Buenas a tod@s!!, bueno pasamos la segunda semana de floración de las lemon cookies kush, de momento no tengo problema excepto algunas hojas amarillas, le baje la dosis de los productos e intento mantener una temperatura y humedad y pH adecuado, hay días y días, de momento respondieron muy bien y están creciendo rápido y muy bien.. ya vamos viendo q tal desarrolla más adelante.... Buen finde para tod@s y buenos humos... 🇦🇷🤝🏻🇪🇦👍🏻💨💨💨

La otra vez no puede terminar con el diario porque trabajaba,pero hora voy a hacer crecer esta bebe 🍀🌱con mucho cariño !!!! Tengo ganas de ver el color Rosa tiene que ser muy buena 🤤🤪🤪🤪😜🤩

Oct.7 day 68 buds are still stacking and getting harder every day & trichomes on all plants are now milky except for Trainwreck #2 which has turned into a long flowering sativa. Powdery mildew has gotten a little out of control on most of the potted girls so I started the long & tedious task of harvesting 1 plant per day starting with Blue Fire #1. Being a one-man operation I’m not looking forward to all the work that lies ahead however judging by the look and smell of these babies, should be well worth it in the end. Oct.8 day 69 cut down all the main colas on Blue Fire #2 & Strawberry Banana #2. Giving the lower branches a few more days to finish then chop chop and into the freezer. 😜😁👌 Oct.10 day 71 cut down all the main colas on Godfather OG #2 and keeping the rest for fresh frozen water hash. Also started trimming Godfather OG #1 eight days after she was harvested. First time drying in the garage which is detached from the house and is not insulated. Average temps in there this week were low 50's-60's F and 55-70% humidity. My concern was temps being too low and the fluctuating humidity. So far after eight days of hang drying in the garage with 2 small fans lighty blowing directly on the colas, God father OG #1 was dry and ready for final trim. That worked out better than I hoped. 🙌 Oct.11 day 72 Trainwreck #2 got chopped whole and is hanging. I would normally trim it up quite a bit before hang drying but I need a break today. Oct.12 day 73 Strawberry Banana #1 finally got chopped today. I shot a video of it in time lapse which compresses my five hour chop time to about one minute. That concludes the harvest of all my outdoor girls this season. Stay tuned for more photos, final weights and reviews. ...till next time Thanks for stopping by See ya and stay safe

left the girls to settle into their new environment. Have been watering every 4 days or so, not much rain this week. Plants are looking good and showing some signs of leaf growth which means the roots have already branched out. Chitosal as a root drench is supposed to help with drought tolerance and salt stress, no salt stress here as we are organic. Next week things to do: 1) spread and re-stake plants. 2) create a top amendment feeding and watering bowl under each plant with some chicken wire.

Everything going well with this strain no problems and growth is very fast, they bounce back after any defoliation. Day 41 - Gave them a haircut today and a good Biosys tea feed till run of will leave now till start of next week Planning to add a drip irrigation feed system this week to make this a little easier. 🤞 Will update next Sunday now end of week 6 as will be busy adjusting and implementing the irrigation feed.

So time flew by these last couple weeks and the girlies finished nicely. I harvested last night and they doin their thing under the cover of darkness. They all had some amazing color when trimming. I can’t wait to see how colorful they become. The 🦍 Glue pistils started with almost an orange sherbet like color and were almost like a strawberry milkshake color when I trimmed. Once again the only disappointment was me 😔, for many reasons. They outperformed my expectations yet again. I’m amazed still, that even if you find your girls face down in the dirt, you still gonna bag something……which is always better than nothing 💯 #ResilientDNA #HellaResistant #StickyIcky #Pungent #Fruity #Gas #FastBuds #AdvancedSeeds Will update with photos, weights etc. most likely Sunday night/Monday. Usually takes 4-5 days in my environment however I’m having a Little issue at the moment. I’ma little warm and a little extra moisture in the air than I like. Stay tuned 😮‍💨

Week 1 of flower!!! im excited and nervous at the same time. I was going to Veg for another week but there were a couple factors that made me want to flip. Last week I did a final transplant into my 7gal pots, 2 days later I start to see pistils. I am a new grower and was like oh crap did I just force her into flowering and gonna herm them since im still on 18-6 light schedule??? I am in a couple discords that are growing communities so i posted some pics and confirmed they are in fact pistils. This is my first grow and not only was I excited to start flowering but also scared im going to ruin them if I dont flip so I did. From more research this is called pre flower and I could have stayed in veg from what I have found but flipped anyways and please correct me if im wrong as Im still learning. The pics you see are day 3 wk1 of flower, I flipped the lights to 12-12 on night 2-29. The girls are already starting to stretch. IM really hoping that my little sour diesel dwarf stretches to meet the Purp and northern lights canopy or else I am going to need to find something to prop her up to meet them. As you can see in the pics I added my trellis netting. My plan was to hopefully get these girls to stretch enough and start filling in the squares. My goal is to fill every square with a flower site. It might be a bit ambitious but still gonna try. This is 2 fold, 1 allow spacing to open up the inner canopy and allow light into the depths of these girls to encourage those lower sites to reach the top. 2 support for the flowers as they mature. Yea they looking alittle bushy and I know I should defoliate but my thought was to wait until the stretch is done then do my full lollipop and remove alot of those fan leaves blocking bud sites and also get better air flow in there. My plan for nutrients is to top dress with my gaia green 4-4-4. power bloom 2-8-4 and worm castings every 2-3 weeks depending on how they take to it. I just hope this is enough. So here's to week 1 of flower!!! any tips, advise or suggestions are welcome and thank you for looking!

This plant has been very enjoyable to grow and the smell of it is incredibly Pleasant I will update when the plants are drying and ready for curing it will take approximately between 7 and 14 days because I wait until the main stem snaps with a crunchy sound. Day 5 of drying and they are still far away from ready but they're starting to show a nice Colours now . the smell it's becoming very powerful even without curing I know many Growers cut them down when the smaller branch are snapping off easy but I wait until the main stem I bend and a crunch very dry sound come out of it because I don't like to deal with mold and I have a very busy life can be opening curing jars every few hours everyday that's why a good Boveda packs and a good drying are my best friends. These are the weights for the two plants that one that was bigger #1 is 51.12 grams the second plant #2 was 36.17 grams . They smell very nice like a kiwi skunk smell to it . The high are strong and last about hour and a half to two hours. For a regular smoker I will classified as day stuff on the Stoney side. With a high THC probably what is advertised on their website . This is very good for somebody who wants to have a quick grow of very good stuff or somebody who lacks space but doesn't want to sacrifice quality. The fact that I couldn't get a large yield out of it was a bomber for me I really like plants that are capable of producing a large yield. Taste 10 out of 10 Aroma 10 out of 10 High 8 out of 10 . day. strong THC. Yield 6 out of 10. Easy to grow strain. Possible to crop in 65 days from seed at 20h lights on.32 Centigrades and 45%humidity. Thank you for reading I will continue to update have a happy grow.