Really happy with the results!

Very fast germination on these 3 ladies. They've been planted into pellets and placed on my heat mat. Three days later and and 3 plants have emerged from the soil 🙌 All surfaces cleaned using The Hydro Company's Clean X Plants potted up and fed their first feeds with thehydroco nutrients. They will be staying on my heat mat and under my LED light until there ready for the tent 💖🌱

Week 6 on flush now sticky wasbi as been growing good got a bit of nut burn but they are on flush now and the smell is stronge and nuggets feel dence and soild @growerchoice @SHOGUN dragon force 4ml/l for 1 week then pure water for 1 week

We've made it to day 28! - 17/12/20 The girls seem to be happy and healthy today. I won't be feeding/watering them as the pots are still heavy from yesterdays feed. A few of the girls have started to show sex & the smell has picked up a little bit(inside the tent), so I'm hoping to see some flowering begin this week sometime. (I've been using my iPhone as my only DSLR lens is useless for focusing on certain depths, but I hate the colour I get using the iPhone... I may be switching back to DSLR unless I can find a better camera app.) update - day 29 (18/12/20) Short update today. Fed the girls today and will probably be feeding/watering every day from here on out, we'll see though. veg growth has really taken off by now, I'm hoping to see some flowering this week. update - day 30 (19/12/20) I fed the girls today. I need to find a better way to hand water, the plants are so short and bushy its a pain getting in between all the branches. I wish i left my drip feed system up and running, I will definitely refine it and use it next run. Update - day 31 (20/12/20) Fed the girl's straight water today. I'm going to purchase the pieces I need tomorrow to reconfigure my drip feed system & hopefully have it running by mid-week! Update - day 32 I attempted to set up my drip feed system today but the plants are too thick around the base to place the halo around :( I will have to wait until next season to set it up, oh well, I guess its hand watering for the next 5-10 weeks Fingers crossed these girls start to flower ASAP. I fed the girls today, everything is looking good so far. I also moved the plants around to try to make hand watering easier, I had issues trying to water the whole pot instead of just one spot due to plants/branches being in the way. Update - Day 34 - 23/12/20 It definitely seems ill be watering the girls every day from here on out. All the girls look fairly happy and healthy, they're getting a bit big for the 5x5 they're in. It looks like flowering has begun on 2 of the girls, hoping to see some more progress on the others in the next few days. Thanks for stopping by! 🙏

Man, that Skunk Apple runtz plant is giving me some trouble. It's still really small and hasn't grown much at all. I think I might've messed up a little because the leaves are looking kinda rough. Hopefully it can bounce back. Well, it's Christmas again. This year feels a little different, though. Maybe it's the snow blanketing everything, or the way the tree lights up the whole living room. Either way, it's cozy and warm, even when it's freezing outside. I'm really looking forward to seeing what Santa brings. I hope I get that new video game I've been wanting. But most of all, I can't wait to spend time with my family. We always have so much fun This past week was a good one for the plants. They started the first week of their stretch, and they've already grown a decent amount. I can really see them filling out. It's cool to watch them grow so fast. I can't wait to see how big they get by the end I always get a little worried at this stage, like they're not gonna get as big as I want them to. But then I remember how they always end up surprising me. By the end, they're always perfect.

so far so good. struggling a bit with low humidity, waiting for some parts to repair an old humidifier.

another activity in gloomy autumn evenings:) I think it will be interesting and difficult growth at the same time :) because the space is very minimal :) good luck to everyone:).

The girls have survived another week ❤️ I did a light defoliation and have been monitoring the RH closely. We have had a very damp week here, and the RH kept climbing and had my fan working hard. They are starting to plump up and fill in 😋. They have also started to slow their drinking habits, instead of watering every three days, it has moved to every 4 now. Just a couple of weeks left, I think I will be harvesting these over Christmas 🎄, and will have some great bud ready for the new year! 🎉🎊🍾

She came out amazing. Super frosty. I got exactly 2 ounce off of her I wish I vegged her out a few more weeks and got a few more branches. Every still branch was stacked! I love useing this site really helps me keep track of my grow and what I’ve done!

The plants are slowly going to flowering stage, the tallest is about 43cm the other 2x35cm and 1x22cm. I have got this “RAW” microbes for the flowering stage but I am not sure if I can or should use it, any advice is appreciated.

Trop Cherry #8 x BeeJayz hasn’t been topped, I transplanted the girls this week from a 1 gallon pot to a 3 gallon pot. Trop Cherry was in a plastic pot but now in a fabric pot. Plants seem to be growing well.

War überschaubar für diese Bedingungen im Keller Die letzte Big Berry habe ich tatsächlich erst letzte Woche geerntet, habe PK13/14 von Canna rein gekippt, da sind die Knospen nochmal explodiert 🤣

Welcome back everyone, As you can see are almost all seedlings growing. Some where still in the soil. Might happend when giving water(seedlings can turn or get deeper), checked it out and they are alive and well. All pictures are from day 4. The humidifier had been added, so I had to adjust the room. I spotted a corner of the room that gets dryer faster. I adjust the fan for now and see what happens. Corners are always hard to get perfect. Sometimes the light, air, watering doesn't come there properly. Seedlings don't need much nutrients, neighter do autoflowers. with normal soil I would recommend to only give water for 1-2 weeks, since it holds nutrients in it as well. But since I'm using Cocos for this grow, I might have to add some basic nutrients in the upcomming week. For this week I gave/give only water turns and Startbooster/rhyzotonic turns. Update day 5: - Lowerd the lights to avoid stretching, they are now at 75cm distance from lamp to pots. I want them at 40-50 cm, but I don't want to rush it. - Added another layer of cocos to avoid the soil from drying up therefore the roots from dying. This will happen because of lowering the lamps down, the soil will get exposed more to heat. As you can see, the humidifier is doing his thing haha. Pictures and videos where taken without the lights + fans on. because of that, it will look like this. Still fun thought. Arround 7 seeds didn't reach the surface yet, lets hope they make there way up soon. Enjoy!

Day 22 and 23: Going easy breezy so far!! I released some ladybugs in my tents on these Chocolate Mint OG's 21st day. So far so good lol. Last night when I watered I gave a little real growers recharge to help with the recent transplant (it definitely gave them a boost!) Its mid summer here in MI and 84+ temps 😬 keeping the house and tents cool has been a challenge to say the least. Thankfully all my plants are in Veg and seem to like the heat. Except the Choc Mint.they are showing mild heat stress on the top fan leaves(at least that's my guess) Tent temps have been around 86 down to 84 daytime. I lowered them so they are 24" from the lights 🤞 hopefully that helps. Other than that, no problems. And some generally happy plants! The recharge and soil combo burned them a very little bit as well. Day 25&26 Nothing too eventful. I watered #2 on day 25. With some real growers recharge. The stuff is awesome! No nutrients needed if you have good soil! Day 26: snip 2 fan leaves from #2(the topped one) she was getting a little bushy. And tucked the other fans under to promote some lower branch growth. #1 I'm letting roll totally natural unless I clean up lower canopy to prevent pests. Day 27: Plants are doing great! #1 is really getting tall and # 2 is staying short and squat because of the training. We are letting #1 go naturally. Today's update is we added some LST wire to #2 to pull down her lowest branches My equipment and gear: 2x4 vivosun Es300 lighting Vivosun oscillating tent fan Honeywell Hurricane fan 6" exhaust outside 15,000 BTU air conditioner 8,500 BTU in tent air conditioning Some sick ass Genetics 😁

CANADA DAY UPDATE🇨🇦 THE TRAGICALLY HIP🤘🥁🎸🇨🇦 MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

Day 84..today I cut..

AMS Supreme is doing really good with the Athena Nutrition, under the Mars Hydro FC4800 light. She is stacking nicely , and starting to develop a aroma. She is due for a solution change very soon. She has been drinking a lot, she should be a nice harvest if she stays on current path. Nothing else to report at this time. Thank you Athena, Mars Hydro, and Amsterdam marijuana seeds. 🤜🤛🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Realized when I setup the soil that I forgot to give it a good soak and allow to sit for 24 hours. It's just straight out of the bag and I feel like I'm not watering them enough.

Le piante stanno benissimo ed hanno già iniziato a fare il classico stretch di inizio fioritura, l'unica cosa che mi preoccupa è la grande densità di foglie, penso che tra una o due settimane farò una gran defogliazione.

Really big monster with big yield powder. Beauty green colors. She is very leafy so I recommend some defoliation. I will upload more details when it will be cured. Also I will upload smoke review and dry weigh.