Likes
Comments
Share
@Borberad
Follow
Woche 3 Das Fundament wird gelegt und Umtopfen steht an. Die Schoki ist in der dritten Woche ihres Lebens. Die ersten Seitentriebie bilden sich und die Pflanze ist gesund gewachsen mitlerweile hat sie 3 Nodien. Und ist über ihren Cube hinausgewachsen und hat diesen kräftig durchwurzelt. Somit wird jetzt in den 3l Stofftopf umgepflanzt. Danach gibt es zum ersten Mal die standart Düngedosis, angepasst an das Pflanzenbild 2,5 -5ml Hesi TNT für ordentlich Nährstoffe im Wachstum, 5 ml/l Hesi Root für eine kräftige Wurzelentwicklung und 2 ml/l Calmag, um unser Osmosewasser aufzuhärten. Der DLI wurde auf im Laufe der Woche auf 40 erhöht. * Zustand der Pflanze: Die ersten "echten" Blätter sind vollständig entwickelt und wie durch die EasyCubes zeigt sich wie eine kräftige Wurzelbildung. * Wichtige Ereignisse: Beginn der Nährstoffgabe. Anhebung des DLI. Umtopfen in 3L Stofftopf * Düngung & Messwerte: * Gießwasser: pH ca. 6,0. Leitwert ca.1,4 - 2 S. * Drain: Wir messen sporadisch, um die Abweichung von +/- 500 S einzuhalten. * Anpassungen: Wir sind überrascht wie gut sich die Pflannze im Easys Plug System entwickelt hat.
Likes
13
Share
apenas 1 das que estavam na tela de SCROG conseguiu sustentar até essa semana mesmo com problema de PH do solo, as outras 3 tive que colher na semana passada, a descoloração das folhas já começando a indicar que o fim está próximo, pouquíssimos tricomas ambar, cheiro maravilhoso!
Likes
24
Share
@Mastr
Follow
This strain my favourite I love her orange smell and lots resin on sugar leaves lots off them I let her grow atleast another week or more and still feed her with nutrient maybe start flush next week will update every other day new pic or videos thanks everyone Update I think she is bruce banner coz she slow flowering and take over 11 week to grow witch is and also smell and bud shape Today I seen most steam bend down and they need support so I try my best I will feed her till day 84 then I give her just ph water for week and hopefully around day 90 she is ready Day 83 top leaves start getting yellow 💛 so it's good thing plant go to last week off flowering
Likes
27
Share
@w33dhawk
Follow
Hi ho ihr growmies! Die Woche ist viel Arbeit gewesen ich stehe beinahe täglich knapp 2 Std vorm Zelt und webe die Triebe ein und halte die Blätter unterm netzt hier und da fliegt auch mal ein Blatt raus an Stellen wo einfach viel zu viel Laub aufeinander trifft. Ansonsten gibt es nicht viel zu Berichten sie bekommt immer noch nur Wasser (nicht ph angepasst, aber abgestanden). Es wird langsam voll im netzt daher wird es auch immer komplizierter ein zu weben, habe die Damen absolut unterschätzt vom stretch her ich hoffe das das alles hin haut da ich davon ausgehe das sie sich diese Woche noch stark ausdehnen wird bevor der stretch vorüber geht. Ach ja und bevor ich es vergesse ich guck mal das ich nächste Woche an mehreren Tagen mal Bilder mache hab es diese Woche einfach nicht gepackt euch noch ne schöne Woche. Cu ihr growmies!
Likes
16
Share
Week 10 flushing plant this week and next week before harvest!! Fast Buds White Widow has been really easy to grow the plant is strong genetically and can handle some stress and recover if your a beginner I highly suggest you give this lady a try. She smells sweet, looks beautiful with her purple hues in her buds and the trichomes just glistening from every angle even the leaves remind you of fall as she's in her final stage. I hope this motivates and encourages others to grow their own medication!!!
Processing
Likes
25
Share
@Xanthur
Follow
This week stretching is done. One of them had a late growth spurt, and is now only 16 inches below the light. It doesn't feel too hot. Leaf temps are 78 right under the light. I'll leave it unless it starts to show signs of stress. You can clearly see her in the pics and video. I have a problem with controlling smell. My house has an entryway that is open to the basement but separated from the main floor, so the entryway smells like the basement. I know what you are thinking... But it is not flower smell. It smells too clean! The massive fan and filter are running at high power to control humidity, and that makes the whole basement smell not normal. Other than that, the tent is on autopilot for now. Not much work needed other than adding 5-10 gallons of plain water every day.
Likes
7
Share
She is getting tall I and next week the buds will get fat. So far she is looking very nice and growing like a dream 🤩
Likes
3
Share
Inizio conta dei giorni.. questo è il secondo giorno...provo questa nuova apricot. Ma sono quasi sicuro che sarà più che buona 🙏💪forza fast buds
Likes
5
Share
@Tidzs
Follow
28/11/2022 - Inizio della seconda settimana, ho preparato una soluzione abbastanza tenera partendo da una base osmotica, dato circa 0,5l per pianta appena accese le luci. 30/11/2022 - Eseguito topping su tutte le piante, forse un piccolo azzardo sua Cookie Kush che era rimasta un pochino indietro. Vediamo come va! 01/12/2022 - Le piante sembrano aver reagito bene al topping, oggi ho dato un "abbondante" irrigata a tutte le piante, circa 1 litro per vaso e un pò meno nei tre vasi più piccoli.
Likes
10
Share
Likes
2
Share
11/03 - Mother moved into her own 17 gallon tote - running lights on dome and in tote - super topped - running high humidity and high temps - nute feeds are the same - tied down all 4 coles thus far. 11/06 - tote dome is holding up nicely - transplanting into 7 gallons and 2x2 tent swap. 11/09 - Opened up the lid more to give her space to blow out from the sides - Blitz humidity for about a week (90%) - Temps running 89F - Clean water feed for the week.
Likes
2
Share
Dieser Strain überrascht mich, er zeigte bisher keinen Schimmelbefall, im Gegensatz zu den anderen Autoflowers. Aber soeben doch beim fotografieren eine kleine Stelle entdeckt und entfernt. Die Buds wirken fest und harzig, der Duft ist stark geworden. Damit es so bleibt, steht auch sie im Direktwind des Venitlators du die Wasserversorgung wurde minimiert. Wenn sie es bis zur Ernte in ca. zwei Wochen schafft, ist eine gute Ernte für Outdoor zu erwarten. Aber bis dahin kann noch viel passieren. Vielen Dank für euren Besuch!
Likes
21
Share
@NG420
Follow
Fattys are growing and seem to be thirstier.Used foliar spray to help the leaves and also started tucking. When the plant was topped pistils were seen for first time.
Likes
8
Share
I really can’t believe it’s 63 days from my baby’s showed there first set of “ true “ leaves :) .. It’s been a pretty straight forward grow no complications, well so far haha , but working in soil and feeding organically with biobizz it’s rare to get any problems . And off course Good genetics from a trustworthy breeder always helps keep problems at a minimum as well . All the girls in my growroom ( I say room it’s a cupboard) are loving the new leds but the C4 from Fastbuds is out preforming In speed , size , smell and at the minute yield :) , the closest to her would be another fastbuds lady the Gelato that’s been slugging away in the corner And seems to be one to watch .. Anyway at a guess I would say another few days a week at most and I will harvesting the C4 Matic :)
Likes
5
Share
@Panda207
Follow
Even growth between all plants, plants were enjoying the extra humidity
Likes
91
Share
@MrCOCO
Follow
The girls grew up again and are already 110 cm tall. I don't see any problems ... I did supercroping and they are fine too ... We keep going ...🍃🍃🍃
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
8
Share
@pzwags420
Follow
On day 1 I adjusted the PH of my reservoir from 6.3 to 6.1. On day 2 the PH was 6.0. On day 3 the buds are really bulking up :) and the reservoir is at 6.0. On day 4 I applied a BTI drench Ph of 6.0. This should be the final application for any remaining fungus gnats. The reservoir's PH is also 6.0. On day 5 I had to PH up my reservoir to 6.2. When I get to the last half of my reservoir the PH seems to dive down instead of up. On day 6 the reservoir PH is 6.3. On day 7 I adjusted the PH of the reservoir to 6.1 and did my final defoliation before harvest. I have one cola that may have gotten pollen somehow... I cant find any male pollen sacks anywhere on my plants so it's kind of a mystery at the moment. Only time will tell and all my other colas seem unaffected.
Likes
2
Share
@Mr_Prawn
Follow
Fotos con 6 semanas y 2 días a 12 horas, esto son 44 días, la primera ya murió y durante la siguiente semana han ido muriendo, a 28/5 quedan 3 que dejaré hacerse un poco mas. El olor en general de las que corté era mejor de lo habitual, había mas plantas con olor fuerte que otras veces.