Moin 😎, Woche 11 ist vorbei und die Damen gehen so langsam in Rente. Und zumindest die Papaya sieht auch schon so aus. 👻 Ich reduziere jetzt schrittweise die Wasserzufuhr und die Lichtstärke. Hatte bis jetzt so um die 1000 PPFD in der Mitte und 850 an den Rändern und ich gehe zurück bis auf 600 PPFD in den nächsten 10 Tagen. Weiß nicht, ob sie noch viel länger brauchen werden. Trichome sind 70% milchig und 30% klar. Auf den Zuckerblättern schon das eine oder andere Bernsteinfarbene. Ich habe mir einen 150L Weinkühlschrank zugelegt (siehe Video) den versorge ich erstmal provisorisch mit einer Umluft und eventuell schon einer RH gesteuerten Abluft und dann werde ich Buds zum Testen schonmal reinlegen. Ich möchte Next Level Qualität und beim Grow kann ich kaum noch was rausholen. Jetzt muss die Trocknung optimiert werden. Als Tipp kann ich euch schonmal mitgeben, dass ihr am besten beim Trocknen einen VPD von 0.9kPa aufrecht erhaltet. Egal wie die Temperaturen erstmal sind. Der VPD ist auch bei der Trocknung verdammt wichtig. Vielen Dank für euren Besuch und bis demnächst (und bald zur Ernte) Terp 💪👽

Another great week of growth, I've noticed she has pretty much stopped growing any larger fan leaves so I havent needed to defoliate. The smell in the space is strong now and she is producing lovely sweet buds that are dense and sticky. Reduced her nute intake and have introduced DRAGON FORCE.

if i grew this again i'd make a mother plant, take clones and veg for short time and flip sooner then I did this round. Although people say lec 315 can be 18 inches from canopy (exactly where the platinum yeti was when finished stretching) the trichomes were just milkying up at day 66 of flower prob can run this one a little longer then i did to increase yield a bit more to allow buds to fatten out more and go more to amber trichomes. Smell: Gas ⛽ on jar opening. Ground up has Vanilla 🍪 perfume Taste: Movie theatre butter 🍿 fuel⛽ baked buttery vanilla cookies 🍪 Medical Effects: night time smoke! crazy couch lock, very sedating, helped me sleep😴 strong pain reliever. narcotic type high, slows thoughts down to clear focus calm. I felt glued to my chair more then any strain I've ever tried before.  Great stress reliever Notes: refer to this one as the "purple pheno" One of the most attractive smelling strains I've ever come across👃👀 when you smell it you want to smoke it. after smoking it you want to smoke more of it... but its pretty potent so this one is likely to end your night once you start on it!😎👌💨😴😴 yielded 23 grams of flower dry #3 green pheno- Smell: Lime with subtle skunk & burnt rubber Taste: Lime peels and burnt rubber Medical Effects: Very Sedating, stress reducer. slows thoughts down Notes: stayed green entire grow, yield 22.4 grams dry flower

Hey guys! Another week and another update! At the end of this week I decided to finally start with the main lining and I won't lie... I was extremely nervous haha 😱 but I believe I did it well, without any major issue! I also decided to move the small 4th plant into a new home and it seems she will like the extra space! This week I also didn't feed my babies as I over watered them 😞 but they still showed some great progress! So I suppose it wasn't that bad! 😊 Soon I'll update the next week, which is also ready and has even more timelapses! Thanks everyone! :D

First week of flowering. The plant will stretch, so i adjusted the LED dimmer to 100%. Did a good defoliation too. Doing good, very healthy.

About 3 week into flower packing in tons of frost it amazing smooth sailing can wait to see this finished product

Great 50/50 hybrid, terp profile is a creamy gas with phunky rancid fruitypine kush tones, fruity coffee tones, Doughy, Candy GMO Dried for 15 days in dark dry tent at 58RH 67F | Dry hand trim | Curing in Grove bag

Finally into the big tent. The plants are looking a bit unhappy but fingers crossed it’s temporary until they adjust to their new home. Also back to using my 550w x 2 LEDs. Hps can cause swings in temperature and the plants love these LEDs better. Will top these once they have recovered from transplanting. Still only using root juice as using allmix soil.

Ich habe meinen Ladies eine neue Wohnung gesponsert. Von 5.6L auf 11,0L. Ich glaube, das wird ihnen gefallen. In den nächsten Tagen schicke ich sie dann in die Blüte. Ansonsten ist alles gut. Einige Klone für einen Freund habe ich noch versucht..... bin gespannt, ob die gewurzelt haben.

J'ai fait du HST sur les plus grandes branches des ztrawberry pour essayer d'équilibrer la hauteur. Bonne idée ? De toute façon c'est fait, on verra bien. Jusqu'à présent j'utilisais des engrais biobizz ouvert depuis 3 ans. ça n'a pas trop mal marché après tout. Mais j'ai investi dans des engrais de green house feeding, je vais utiliser ça maintenant. ( 0.6g/l poudre hybride + 0.4g/l booster pk) ------------------------------------------------------------------- Grow Room: trafika urban hydroponics 100x100x200 cm Lamp: kit trafika urban hydroponics ballast & lampe HPS : 250-600w Extractor & carbon filter : Mars hydro 6 inch 402 CFM ( power 3/10 ) Soil : 20% perlite, 20% vermiculite, 60% universal soil Average daily temperature & humidity : 20 à 29°C 35 à 60% Average nigth temperature & humidity : 12 à 17°C & 50 à 70 %

Day 16 - Changed from 3 gallon to 5 gallon bucket. PPM in new bucket was 300. No other notes noted.

Thanks for stopping by growfessors, Green Crack and LSD are coming along, lots of bud development, for these hungry ladies. Slowly removing the dying leaves.

Pineapple express auto 17weeks

Got a dehumidifier it’s reading different from what mine controller 69 is saying but I have it set at 40% it’s the lowest so it’s going pull humidity regardless right now it’s about 53% which is okay would like it to get down to the 40’s I also changed the light schedule today to 20/4 the humidity raises at in my tent when lights are out so I figured change it to 20/4 instead of the 18/6 I’ve been running so if humidity does go over it won’t be for as long as before hopefully this works just trying to avoid any mold situation So far the Amneisa Haze 2 is at stretching she’s going be big I can but the haze 2 is done seems to just be flowering the sour diesel is looking good as well so far I’m happy with its looking like left town for two days and the auto watering pots worked!

Last 2 weeks only plain water on blue medi kush. Flushing other girls for a week now and this should be their final week of life but dinafems grape and og kush are still shooting white hairs or they are just turning them to orange very slow. I got the runoff ppm on all girls down to 200(my tap water), want the smoke to be as clean as possible.

Major issues with calcium def for no reason and a weird re veg, and the utter lack of mould resistance. Plant was tall and buds are huge and dense, let's hope the taste is phenomenal.

The 3rd week was a big one all plants finished stretch period and it was becoming a little wild for a second. I moved 4 of the bigger girls into their own room with their own 1000w LED plus a shared 250w HPS in the center. I will be tying down branches to get flat canopy then each of the 4 will be pushed more towards the center for better light coverage do not mind the setup its not fully there but will be finished before the end of the week. In the main grow room there is a single 1000w HPS cool tube running at 100%. To remove the 4 bigger plants I had to cut the entire trellis off the canopy but will be placing a new layer this week as well. As for nutrients feedings well clearly from the size of these girls you can tell they have been eating. In about 2 weeks I will defoliate one last time and then its them vs. the world til havest. Happy Growing!

1st week of 12/12 light going beautifully. They are doing really well. Although I still experienced root issues. I think this spot is cursed :P

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) A seed germinated via skotomorphogenesis (in the dark) will generally develop faster in its initial stages to reach light, though it will be etiolated (elongated and weak) and will switch to slower, more robust photomorphogenesis (light development) once it emerges into light. While skotomorphogenesis is a rapid, growth-oriented process for soil escape, it's a temporary phase; photomorphogenesis is a more sustainable development program that prepares the seedling for photosynthesis. 18/6 with the 6 being IR instead of darkness, keeping temps overnight a neat 77F-80F. PPFD overnight 1.8. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches 50% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over, this creates a strong pressure differential which will work wonders on your grow. replicating high and low pressure fronts in nature, critical for oxygen diffusion, but more importantly, full control of your RH%. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, resulting in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow slower to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.