Into the first week of veg and it seems to be good so far. Had a mini issue with my hygrometer fell on my seedling knocking it over. I supported it and continue feeding, hope it will recover. These pics and 3days since incident. Thanks for looking and cheers Happy growing

Plants are doing and looking beautiful. Plants look like they fully recovered from the previous weeks mishaps.. Buds are developing nicely at this point And every day I notice them slightly bigger .. I'm noticing the smell get stronger day by day as well Keeping temp at 76-78 and humidity at 45% At the end of week 3 I will run 7L of pure r20 ph@6 through the autopot system , to let any accumulated salts from the hoses and roots flush out . The plants should use up 7L in about 2 days and then I will continue with my regular feedings probably on day 3 of week 4 Also the weather has been getting warmer the last few days and after adding the 2 new lights the temps are getting higher in my tent .. Added 8inch Vortex inline fan to bring fresh air from outside on a controller that shuts on or off depending on temp

She’s back in the tent for a bit with the 4 new girls. Soon will be back into the cupboard once it’s all set up.

Hey everyone 🤗. Today they were planted in their 11 L pots 😀. Now the root growth can really accelerate. When repotting, a total of 3 g per liter of Green House Powder Feeding Bio Grow was added to the Canna Coco 😊. That's enough for 8-10 weeks :-). I'm curious what they are doing this week and I wish you all a lot of fun with the update :-). Stay healthy and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

She's in week two of flower, going good.

Going

The plant is drinking over 3 gallons of water every day. I’ve lowered the PPM’s to 600. Everything seems to be ok now. I will try to change the reservoir water every 5 days from now on. She started to smell amazing! Very lemony 🍋 P.S. Lowerd the TDS to 550 PPM on day 46. Also just realized that I stressed my plan with to much light. I moved the light at 13” and dimmed to 95% ... I will continue to dim it 2% every day...

11/10/21 new week for Captain future Single photos will be updated soon She bit slower then the rest but getting there topping has bin done and everything going great so far plants loving the new FC-4800 so as i 🤩 absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter. Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation.

Another week already... Well the girls are dialed in perfect, the room is really getting a wonderful smell, and buds are filling in everywhere. Its been 16 days since I switched the time and put the girls into Bloom, and they are filling in like crazy. Not much else to say but that everytime I grow any seeds from Original sensible seeds they grow big and wonderful. Cant wait to try these girls, Banana Sherbert. Until next week, smoke a fatty, help out your fellow grower.

Day 75 she’s in the dark ice flushing looking beautiful as ever. She smells Devine. I can’t wait for her to finish up so she can get the chop. Her trichomes look so good I can’t even start with her. Beautiful looking lady.

1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂 1/18 11:58AM. BRAM STOKERS TRAILER PARK DRACULA........I SHOULD BE WORKING ON THE PLANTS BUT THIS IS REALLY GOOD. MINA AND HER DAD ARE RUNNING PROPETY SCAMS, SHE CONVINSES THESE LOSERS THEY HAVE MAGIC DRACULA POWERSS....AND WE STEAL THEIR TRAILLER. REINFEILD RANDY , JULIANFIGURES IT OUT AND BLACKMAILS BOTH OF THEM. AND MUSICAL GUEST KISS!! A GREAT HALLOWEEN EPISONDE.... OH I FORGOT I AM SUPOSSSED TO BE GRWOING PIT.

LJ4Q23 Flower 10 
HARVEST WEEK _______________________________ Environment Targets (Flower 10 - Harvest) - Scotoperiod: [ 13, h] # Contiguous dark hours daily - TemperatureMax: [ 78, °F] - RH: [57, %] - VPD: [ 1.2, mS] - LightIntensityMax: [ 750, µMol/m2/s] - LightDistance: [ 16.5, “] Fertigation Plan: - RLA Hydro Chart, EC 1.3 - 0.8 - Primer A: [ 6, ml, gal] - Primer B: [ 6, ml, gal] - Silica Skin: [ 2, ml, gal] - Resin Bloom: [ 2, ml, gal] Penultimate 3 Days (before Harvest) - RLA Resin Bloom, EC: 0.8 __ Wed Jan 31, 2024 LJ4Q 64:F:9:1 EC: 1.3 - [x] Runoff Amount: [ 550, ml] - [x] Runoff EC: [ 3.3, mS] __ Thu Feb 1, 2024 LJ4Q 65:F:9:2 - [x] Runoff Amount: [ 650, ml] - [x] Runoff EC: [ 3.2 , mS] __ Fri Feb 2, 2024 LJ4Q 66:F:9:3 Refresh/Dilute Reservoir, EC: [ 1.1, mS] - IF Refresh - Resin Bloom Only @ [ 8, ml, gal] - [x] EC Reservoir, Dark: EC: [ 1.3, mS] - [x] Add 1 Gal, w/ Resin Bloom [ 8, ml, gal], Reservoir EC: [ 1.1, mS] - [x] Runoff Amount: [ 800, ml] - [x] Runoff EC: [ 3.2, mS] __ Sat Feb 3, 2024 LJ4Q 67:F:9:4 - [x] Reduce Feed Duration from 4 Minutes to 3 Minutes (775 ml Runoff is a tad high, yes?) - [x] Trichome Check - Are we Ready to Harvest Tuesday? - [x] Runoff Amount: [ 775, ml] - [x] Runoff EC: [ 2.9, mS] # First Day with Runoff EC Coming Down . . . __ Sun Feb 4, 2024 LJ4Q 68:F:9:5 - [x] Runoff Amount: [ 550 , ml] - [x] Runoff EC: [2.9 , mS] - [x] Dilute Reservoir to EC: [ 0.8, mS] # Resin Bloom: [ 8, ml, gal], EC: 1.0 __ Mon Feb 5, 2024 LJ4Q 69:F:9:6 Add another gallon w/ 8 ml Resin Bloom Only . . . EC Solution: [ ?, mS] EC Reservoir: [ 0.9, mS] - [x] Runoff Amount: [ 75 , ml] - [x] Runoff EC: [ 4.5, mS] __ Tue Feb 6, 2024 # HARVEST DAY 70 !!!! LJ4Q 70:F:9:7

🌿Week 4: Defoliation & SCROG Setup Week 4 was all about structure and airflow. The canopy was getting bushy fast, with a ton of inner growth, so we went in for a solid defoliation session across the board. Lower fans, overlapping leaves, and shaded internodes were cleaned up to let light penetrate deeper into the canopy and reduce potential humidity traps. Right after that, we finally dropped the SCROG net, stretched out gently across the canopy to guide the branches horizontally and prep for flower stacking. Some of these phenos are already reaching for the sky, so the timing felt just right. Captured a full-time-lapse clip of the defoliation + netting process. It’s super satisfying watching the chaos turn into clean lines. Nature meets intention. Feed Bloom since 20/6 22/6 Defoliation 🌱 Plant Response: After defol, they bounced back fast. Tops are perky, leaves are praying, and stretch is continuing in a controlled way. The structure’s more open now — better airflow, better light distribution, better everything.

Esta semana empiezan a entrar en la sala de floración. Las primeras en entrar han sido unas shishkaberry´s, 2 zkittlez y una grapefruitmalawi. También hay un macho shishkaberry.

Mephisto and bighead going into darkness for 48-72 hrs. Then the chop. Big bomb is the last one standing in the 5x4 will begin flushing soon

Sapphire scout og bred by Humbold this phenotype surprise me a lot, frosty resins the amazing bud shape and dense. Intense flavor and aroma of pines,flower. Sadly humboldt not available in seedcity now so I purchase ripper seed to grow next season instead. Enjoy growing mate🎉

Again, a week has passed. I repotted the plants into their final 15L/4 gallons shoes with Plagron All-Mix. Plants are looking fine, not perfect, but okay. It feels like they are a bit overwatered and/or very slightly overfed because of the All-Mix. For now, I reduce the watering by 50%. Furthermore, I did a FIM on another Jack Herer (#3). The first FIM I did on JH#1 is looking to work out perfectly, as I can see the development of four new stems (check out the pictures). Great! The SP 3000's intensity was increased to full power, it's very bright. I am happy with the quality of the light. It does what it was built for and does it very well. Temperature and humidity stats are looking perfectly so far. I hope it stays like that, the days are getting warmer as summer comes our way. But my ventilation is currently running on intensity level 1/5, so we still have some room for maneuver. In addition, I will get a second oscillating clipfan soon. Next week I plan to FIM plants that have not been FIMed yet and let them recover. By then, most of the stress for the plants should be over and I can let them grow in peace. Stay tuned!

Starting to get pom poms nice and early and throwing out tons of frost..had to raise light and dim to 75% was hitting 1300ppfd without co2. No good. Adjusted to aprox. 900-950 ppfd. Stretch is over woo-hooooo🙌