Likes
21
Share
2024-05-17 And they are in Turbo- Mode. ( explosive grow) They were growing around 30 cm, i did some training on them. but you dont see it anymore, just the topping is to see you can watch them grow, literally i think next week we will see some flowers. and they will go outdoors ( probably) just waiting for the best time reeders Info: Fatso GMO F1 Auto, a feminized hybrid strain, emerges from the crossbreeding of two autoflowering varieties: Fatso Auto and Cotton Candy Auto. This California-derived cultivar leans slightly towards sativa, offering growers a straightforward cultivation experience coupled with impressive yields, robust THC levels, and a delightful palate featuring sweet, candy, and fuel undertones. Thriving both indoors and outdoors, Fatso GMO F1 Auto exhibits above-average resistance to mold, while still benefiting from adequate ventilation, particularly in environments with higher humidity levels. Its exceptional resistance to pests and pathogens ensures hassle-free cultivation. While indoor plants maintain a compact stature of around 100cm or less, outdoor specimens can stretch a bit taller, reaching heights of up to 130cm when grown in open ground. Completing its entire lifecycle within a maximum of 75 days from germination to harvest, Fatso GMO F1 Auto delivers yields considered average yet impressive for an autoflowering strain. The combination of high resin production and elevated terpene levels renders it an excellent choice for cannabis extract production. Its terpene profile presents a sweet and funky aroma with savory hints of Skunk complemented by pine and floral notes. On the palate, it delights with flavors reminiscent of sweet candy underscored by subtle fuel undertones. With THC levels reaching a high of 24% and minimal CBD content, Fatso GMO F1 Auto delivers a balanced and uplifting effect, appealing to enthusiasts seeking a satisfying and harmonious experience.
Likes
8
Share
This should be up to week 2-3 of flower, where the Mimosa x Orange Punch, which had the earlier Mutation, started herming on the mutated part, which i noticed a bit too late and it pollinated some of the other buds, i cut all of the affected bud sites of, in the end the furthest away runtz got pollinated but the others luckily barley did and only had like 5-10 seeds in total.
Likes
14
Share
Glad everything is growing good. Wish the best for the flowers which are growing great. Have been using alfala meal to produce a better smell and it sure is working great . Used defoliation method on bottom leaves to produce better airflow.
Likes
15
Share
Smell ♥️ but i will not grow this strain again
Likes
7
Share
Seeing the frosty goodness for the first time this week. I’m still giving the girls two caps of h2o2 to every gallon of water and so far it’s working as expected! They seem very healthy with no signs of pests or PM (knock on wood). I also forgot to mention that I flushed them once this week and couldn’t believe the amount of water a 5 gallon pot can handle! must be the coco.
Likes
6
Share
Day 36 and all is well both spliff strawberry made it through the high humidity and are still growing strong
Likes
34
Share
@Roberts
Follow
FBT 2308 is growing great in the Agrogardens nutrition, under the Medic Grow Mini Sun-2. She has gotten her roots pruned, and selective defoliation plus lst. Everything is looking really good for it at the moment. Thank you Medic Grow. Agrogardens, and Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
3
Share
@BLAZED
Follow
Week 17 (7-10 to 13-10) 7-10 Temps: 19.2 to 24.8 degrees Humidity: 61% to 70% Increased the light's intensity from 65% to 70%. 8-10 Temps: 20.3 to 25.6 degrees Humidity: 60% to 73% Watering: Both 500 ml. 9-10 Temps: 20.6 to 25.2 degrees Humidity: 60% to 69% Watering: Both 500 ml. Dry Weight #1: 3.6 kg. #2: 3.5 kg. 10-10 Temps: 19.7 to 24.8 degrees Humidity: 53% to 71% Today i did a heavy defoliation. (Schwazzing) 11-10 Temps: 19.1 to 24.9 degrees Humidity: 49% to 62% Watering: Both 500 ml. 12-10 Temps: 18.4 to 23.9 degrees Humidity: 50% to 61% Watering: Both 500 ml. Dry Weight #1: 3.3 kg. #2: 3.4 kg. 13-10 Temps: 18.3 to 24.2 degrees Humidity: 49% to 62%
Processing
Likes
10
Share
@GrowerGaz
Follow
Just water and calmag, then I have them a KNF soil soak . Some light defoliation.
Processing
Likes
11
Share
Really small dense nuggs don’t kno y she tend to have small dense nuggs cud be genetics due to the watermelon zkittles but the terps on her crzy and wen u squeeze the nuggs 🍬🍉🎂 Can’t till see her fatting Up
Likes
5
Share
@gerrypom
Follow
just finished the stretching phase, now is time to flowering
Likes
25
Share
Plant was transplamted in to 5.5L pot.
Likes
19
Share
Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D50/F11 - 12/10/23 🛠️ EC 1.3 (stable) pH 5.5 (raised) -- pure water 🌊 RES Changed 💦💦💦 💼 Made some LST on the little one. No more work on the bigger 🧠 I'm going to change the water within today and run it for 12-24h and then put only bloom nutes 🚀 ________________________________ 📅 D51/F12 - 13/10/23 🛠️ EC 1.3 (by set up) pH 5.5 🌊 New water, calmag, bloom A and B and B52 💼 Removed all LST constraints on the big one. Some spouts removed from the little one. Some defolation 🧠 All training was removed now I will let her grow normally 🚀 ________________________________ 📅 D52/F13 - 14/10/23 🛠️ EC 1.0 (falling) pH 6 (rising) -- EC 1.3 pH 6.1 🌊 No water added. Added Big Bud and Bud candy to raise EC until 1.3 💼 LST and defolation on the little one. Made Timelapse video. 🧠 She's eating a lot: very good 🚀 The little one is sprouting out the first petals ________________________________ 📅 D53/F14 - 15/10/23 🛠️ EC 1.1 (falling) pH 5.2 (falling) -- EC 1.45 pH 5.4 🌊 Water decresed a lot. Added 4L and Bloom A-B - Calmag and a little of Rhino Skin (silica) 💼 LST on the little one, some defolation on the big 🧠 I would like to have only nice big fat buds, so I need to work on this goal 🚀 ________________________________ 📅 D54/F15 - 16/10/23 🛠️ EC 1.5 (rising) pH 4.7 (falling) -- EC 1.4 pH 5.4 🌊 Water decresed a lot. Added 6L Bloom A-B and lot of Calmag 💼 Only a little defolation 🧠 Next time, no calmag at all 🚀 By mistake I added a lot of calmag so to balance I have to add lot of water and now the pot is completly full. Keep in mind there is a lot of Calmag in it ________________________________ 📅 D55/F16 - 17/10/23 🛠️ EC 1.5 (stable) pH 5.2 (rising) -- EC 1.2 pH 5.4 🌊 Added pure water and a little of silica (Rhino skin) 💼 🧠 🚀 Some leafes tips are burning, so I'm going to go back to 1,2, trying to have a good pH range ________________________________ 📅 D56/F17 - 18/10/23 🛠️ EC 1.2 (stable) pH 5.7 (rising) 🌊 No water neither nutes added 💼 Little defolation 🧠 Maybe the Thrips from Granada come out and infected Marlene. I will spray also her tonigh 🚀 Some symptoms of insects like leaves bitten
Likes
13
Share
@NicoKh
Follow
Was a little bit challenging for me, due to the outdated nutrients table, mostly on the Flowering period, also little thing like i have to fill more the pots, also with this kind a strain and also with cuts instead of seeds, may be is better to don't do the topping and don't loose time and energy on the vegetative period. At the same time, more or less about the 8th week of flowering it starts to appear something like Alternalia or Overfeed of Phosphor still don't sure. All this issues have impact the grow in terms of the size of the branches and the whole plant, the size of the buds and the hardness. In strictly terms about the strain, the quality is out of mind, amount of resin is crazy, just have to improve my skills and get bigger crops
Processing
Likes
11
Share
What a difference a week makes. Feeding every watering (every 3rd day) Fox Farm Trio and seaweed. Running hot in the tent! 87 degrees during the day. Cooler weather is on the way. Anyone using CO2? I think to grow in the summer I’m going to have to use it. Most of the plants have shown a calmag deficiency but so far so good
Likes
4
Share
Привет Садоводы и огородники !!! Прошла неделя и цветки высохли и получились очень хорошие эффект погружения и расслабления с кучей мыслей цветки очень плотные с трудом крошатся и очень липкая смола только не понял до конца ее запах (не понятный) ,но пахнет очень приятно правда получилось не очень много но качество очень очень а ее подруга гидропоника продолжает цвести сегодня я поменял раствор на новый и это будет последняя неделя и еще неделя на Ripen