Well where do I start; they have been growing like crazy and have noticed since I've started collecting rain water they are happier and starting to thank me. They are further along than I have expected unless I forgot a week 😅. But I am happy with how they are looking and can't wait to see their flowers 😊 happy growing's my fellow weedlings🌳🖖🥦.

Hella dear growmies! 😁 Our little Hella girl is sooo pretty, sigh!!! ❤️ I spray the babies with Fast Plants Spray every 3 days, dim down the LED until they are dry again.. 💦 It gives them a lot of attention and nutrients until they have grown a sufficient root system. DAY 9 Watered for the first time 💧 DAY 11 Watered with nematodes 🐛 just 100ml of water each plant because the soil was still damp. Thanks APTUS Holland for the amazing goodie pack, I'm already having lots of fun with the product line!! 😍💚 You guys rock! __________________________________________________________________________________ HELLA JELLY SATIVA (30% INDICA 70% SATIVA) | AVG. THC 26-30% | HIGHLY UNIFORM | EASY TO GROW, VIGOROUS HYBRID BLUE COTTON CANDY | STRAWBERRIES | GRAPES FLOWERING TIME 45 DAYS Want a productive, fast flowering strain with a high THC and covered in sparkly trichomes? Then this winner from our 2019 Phenotype Mega-Hunt is for you. A sativa strain with the growth habits of an Indica, Hella Jelly gives you faster flowering with sturdier structure, the best of both worlds! This fruity cotton candy terpene strain will delight extractors or look amazing in the jar. Effects are strong but not debilitating, plus test results found a bit of CBG and CBD for added intrigue. Hella Jelly is a great performer in all growing environments, but particularly ideal for a quick turn or climates with earlier fall weather. https://humboldtseedcompany.com/hellajelly/ ____________________________________________________________________________________________ Setup: 140x70x200 cm Spiderfarmer tent 2x Monkey 16W fans (not oscillating) 1x Secret Jardin 30W 1x box fan 50W oscillating (on lowest level) LED Full Spectrum 320W AGLEX AGL-320W-MA 5,6 kg foldable, dimmable 864 pieces Samsung LH301H 864umol/s 2,7umol/J full spectrum white + RED 660nm + IR 740nm wavelength range 380-780nm covering 3x4ft APTUS Holland - https://aptus-holland.com 💚 Green Buzz Nutrients https://greenbuzzliquids.com/ 💚 ❗ Use code GD42025 for generous 25% discount (for orders of minimum 75€) Biobizz Lightmix + coco + wormcastings + perlite Carbon Active Granulate Filter 125/360 cm³/h PrimaKlima exhaust EC 125-400/240 cm³/h

She completed the first week of flowering happily and she keeps stretching. Trailers net added to level the canopies.

WEEK 6/3F // D36/15F - D42/21F Das Wetter war in dieser Woche ein Traum. Es waren Tagsüber 25-30°C, 10-14 Stunden Sonne, kaum Wolken und kein Regen. Besser hätten es die Guava in dieser Woche nicht haben können. Nachdem ich im letzten Jahr schon dabei war von einigen Ladys einige Triebe wegzuschneiden weil sie durch das Nass/feuchte/neblige Wetter von Mehltau oder auch Schimmel in der späteren Blüte betroffen waren und ich letztendlich über die letzte Outdoorsaison bestimmt die Hälfte vom Outdoor-Grow in die Biotonne geworfen habe, bin ich zurzeit einfach nur happy wie die Outdoorsaison 2025 beginnt und verläuft. Gegossen wurde an Tag 38/17F, an Tag39/18F, an Tag40/19F und an Tag42/21F. An den Tagen gab es ca 1L. Der ph-Wert beim gießen wird aufgrund des hohen Anteils vom Cocos im Substrat (50/50) nicht höher 6.3. Höhe 80 cm

Just feeding ph d water now for the last 10 days hoping she will be done by next week, I think if she'd been on 18hrs from the get go she would have probably finished by now .

Week 1 of the latest cycle and starting out with some new hardware and an expanded grow print👍. We’re running 4 autos via a recirculating Dutch bucket system. First time on a dutchy so it’s gonna be interesting to see how it stacks up against DWC. I’ll give a full rundown on the system I’ve cobbled together on the next update. So far - all seedlings have germ’d without issue using the standard p-towel method. Why more people don’t use this method on GD is beyond me. It’s so reliable that some breeders even warranty your seeds if you use this method and more than 1 seed fails to crack. We’ve got little sprouts coming up now and it’s all just waiting for those first couple fan leaves to come out and those roots to run to the bottom of each bucket. They’ve been placed in root riot cubes (essentially a version of rapid rooters) like most of our runs and I’d recommend their use with all autos. Time and stress on young autos is key so they need the absolute best start you can give them👌. End of week update - looks like we got 4 quality little seedlings here👍. Alls good other than battling a ph issue for most of the week. Keeps spiking overnight for no real reason - hopefully it’ll even out and isn’t the early sign of a major problem🤞. Background The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎

7/3 Hot as fuck today. Japanese beetles were around. I killed a few. I'm going to have to go over and keep an eye on things. It reached 90° today for the majority of the day. I watered around 1pm as I noticed most of the bags were very light. I'm glad I held off on the BT. I've dealt with jpn beetles before so hopfully that won't be an issue. Things are getting big. It won't let me upload any pictures or the video I did. I may upload it to past week. Went back over at night and and plants looked dropy but it was after 7pm and they were just going to sleep. 7/4 Didn't take photos this morning. Found some jpn beetles. That's the damage I've been seeing. I went back over last night to hunt them but I only got two. There weren't any others. No biggie. I'll put some pics up from today after I get back 7/5 Didn't get a chance to check the plants out today. My intuition tingled around 1pm and I had just gotten home and I ran over to check them. They displayed minor signs of heat stress as seen in the pics (due to the super high humidity and 90° weather) and the bags were light. A few were REALLY light. I could see they needed water. I WATERED 4 1/2 GALLONS TO THE GARDEN. DO TO THE HIGH TENPS AND WINDS IVE HAD TO WATER THE LAST THREE DAYS IN A ROW. IVE SLOWLY STRARTED INCREASING VOLUME. I don't want to water until I get a shit ton of run off because I want to keep the nutes in my soil as long as possible. As you can see things are going great. Minor pests but notjing major. They're growing at a very rapid pace. I'll need to add another layer of supports soon and begin to LST some of these girls. I've got one seedling in a 10 gal and I'm pretty sure it's a feminized red runtz but it's in preflower and looks and SHOULD be a female but I haven't seen the white hair yet. Looks like a female preflower though. I do have one auto though in a 5 gallon tjats doing good too. I have a bunch of pics but the internet is too slow. I'll upload tomorrow. Started pouring around 6. 7/6 Poured sheet rain all night. After it had Bern super fucking hot and I watered my plants with 4 1/2 gallons. Oh well. If I didn't water we wouldn't have gotten the rain. The fabric bags makes watering easier. The wind will dry out the medium. We do have some rain in the forecast. A pallet fell over and knocked my 5 gal bucket with tje auto into a 10 gal seedling but it held the pallet up and didn't damage anything. Out of all the ways it coyldve landed it landed just right to not hurt anything. Everything is super healthy. I do have some random pest damage but it's minimal. I'll decide whether to use a spray or not. Didn't take pictures this morning. Was pressed for time. 7/7 Super hot even at 8a.m. Rained the majority of the day yesterday. Plants are getting HUGE. I'm going to have to build a second round of supports and should probably start some LSTing. They seem to like growing natural how they are (besides the original topping and FIMed. You can tell these are ALL very high % indicas. I'm seeing pistols spitting out everywhere. Event horizon and sherb cake seem to be in the lead. The seedlings have realky taken off. The one I put in the 50 has fan leaves the size of my hands. 7/8 Wow it has been extremely hot. It's going to be in the 90's again today. Checked my plants and it seems the GMOs seem to be using more water. Those bags were a little lighter. Seeing how there is no rain in for a few days I had to water. WATERED 3 1/2 GALLONS. LAST SEEDLING FINALLY SHOWED AS A FEMALE. 7/9 Bags are still heavy. Found ONE jpn beetle this morning. Plants seem to be bigger everytime I look.starying the stretch and spitting out some pistols. I took some pics of the pistles. I'll update 7/10 should've started a new week but I didn't. I'll make next week six days. Plants are starting ro stretch. Minor random pest damage but woth the heat they need lots of water. Noticed a couple dead interior leaves so I should probably go through everything and defoliate. I need to add another layer of supports as well.

Day 71👋🌱 Started flushing. Giving ph controlled water at 6.2/6.5, I check TDS to water owerflowing from pot, bringing it to 50ppm from 400. Now I’ll start checking trichomes every three days, I’d like a 60% white and 40% amber. Day 72👋🌱🌱 Hi all growers, how is going? Second flush, baut maybe the real first one😎, i gave 10 lt of ph controled water (6.5) and was checking ppm from water coming out. i gave water unitl it reach 400 ppm, my water is 200 ppm, i hope i'll bring it to 50 ppm for next flush in 3 days. This lady is so fat, and tasty already i can smell chocolate and pinus, i'm sure they're going to fatten up 😋😉 Day 77🌱🌱🌱 🌱🌱🌱🌱 Keep washing it with ph controlled water, water now looks cleanest and buds are really blooming now, leaves are loosing color in favour to buds, i think i've got ther 6.7 days left to this lady cut. Let's see!!!! Let’se go!😋

Early skunk 2 and 4 stretched a lot this week while early skunk 3 didn't as much. ES 3 development seems to be faster then 2's and 4's however is not gaining as much height and shoot structure as 2&4's. Noticed little burning on ES4 leaves closer to ventilator. La fanta CBD evolved a little this week, noticed by pistils finally developing on a fast rate. 17/10 Fed them with liquid quillaia extract, biosymphony (psb) and little lmx to the water reservoir. Last one in order to slow down algae dev on reservoir.

A lot of rain and wind, continuously. Temps have dropped as well. I’m reading another week or two to chop this plants. Sativa dominant hybrids did the best, the Fastberry and the banana purple punch did not really develop as the other two. In specifics the cbd crack developed sizable buds, and the blue dream as well, the flowers are not as developed tight and dense as in the indoor grow. A bit of fox-tailing nothing too expressive. Minimal work, as per the setup chosen, an no extra nutes this week.

This week flushing the wedding cake i thought that was the problem was an excess of nutrients, but instead the water was quite clean, around 1100ppm at the first drain, after several flushes water is now on 600ppm.. It seems that the others are starting to have the same deficiency that hit wedding # 2 .. now I'm treating them with 0.5ml of cal-mag adding it to the other nutrients for once a week (except wedding # 2) I will wait for the soil to dry out, to give her only clean water since the final harvest is not long. ⚠️ UPDATE DAY 45 ⚠️ Yesterday flush for dos si dos and today flush for (wedding cake 1) they are having a nutrient lockout too..😪 The (wedding cake 1) is clearly healthier than her sister (wedding cake 2) by looking at her color, but unfortunately she had excessive PPM / EC too.. So i did the same procedure by using only tap water, but this time added only 0,5ml of cal-mag. Water was at 6.5 ph until I got a better runoff, it went from 5.7 to 6.0 PH and from 1800 to 700-600ppm 😬 I have never thought of overdoing nutrients so much.. I will certainly learn a lot from these mistakes 🙌🏻

Flowering nicely, starting to stack a little already. Did a 50% defoliation and removal today. going to remove some more popcorns and climate blockers tommorow. There are allot of tops. I have to train myself on training plants better to dial in how many cola tops i want and get them at the same height. Not a strong smell coming off but when you smeel the fingers , Ooohhh its so smooth ans sweet. This is looking like its going to be a big year for the tent. I am liking the Canna nutes. Delay after delay on dripper setup i am now puttin three more valves in for flushing off flush water reservoir, just waiting for parts and assembly. Home Assistant is fantastic at controlling entire setup! Lets roll with it.

Hi guys! My ladies are streching like crazyStarted to produce flowers.So far is everything goimg ok.Have to remove som lower leves,becouse they started to get yelow.

Nothing much going on here. No LST. Didn’t really takeoff many new leaves. I didn’t check up on the plants for a whole 24 hours. I didn’t notice when I last watered that I had missed a plant as you see in the first video. It went back up in about 6 hours like nothing ever happened to her. When growing many plants it’s very easy to forget to water one or two. That’s why it’s important to water all single file from row to row , starting from the top plant to the bottom plant, all the way though the last sections. Learned the hard way lol

Waiting to get it up to speed for ScrOGging. Quite impressed by the roots, loving the Dynomyco. I also lowered the light a bit.. it should be getting about 20 DLI at the moment.

Well she all done, now it's just time to dry her out and get her trimmed and cured. Was a great grow, can never complain when you max out your tent lol. High humidity last 2&3 weeks at night, up around 70% even with the tent walls sucking in hard and fan at full speed. Didn't see any issues while cleaning them up for dry (knock on wood), but did have to move my humidifier to be directly beside the tent with its dry air outflow blowing into the tent intake to get the environment down to 60% for drying. Can't wait to take a taste before curing in 7-14 days once dry is done

Encore 4 semaines avant la ligne d'arrivée.