Por ahora todo va bien, la Mandarin parece un poco estancada en el crecimiento respecto a la Nl5.

7/1 Day 92 from sprout, day 37 of flower. Worth mentioning I started counting day 1 of flower from the day I switched the lights to 12/12. I guess some people count days of flower differently than that, but that’s mine. Buds have been packing on the frost over the past few days and slowly getting fatter. I know I won’t be getting any massive buds just because I topped multiple times and have a good amount of lower bud sites growing but that’s perfectly fine with me. Generally it looks like I’ll be getting golf ball sized buds all around. I also noticed I had 1 top bud site that was getting a lot more light than the others. Well I happen to be able to move that bar around away from that bud site in order to better disperse the light and even out the PAR map a bit. So I slid that over which allowed me to safely stay under 1000 PAR at that top while increasing my light up to 75%. This should result in more light for the lower parts while staying essentially the same up top. 7/5 Day 96 from sprout, day 41 of flower. I gave the light a small nudge past 75% yesterday and I haven’t seen any light stress yet. I’ll keep nudging it higher until I see something, but I gotta be near the limit. Most of my top sites are sitting around 900 PAR, but I have two sites that spike up to around 1050 PAR. I do have two CO2 bags resting on top of my light but it’s impossible to know how much that helps, if at all. Growth has been great though; buds remain frosty and are slowly getting bigger still. The top half of the buds will be of respectable size, no monsters but good solid bud. I’ll still have some larf way down in the lower half though, an unfortunate consequence of the insane stretch and being unsure how much to hack off in that scenario. I debated trimming them all off now but I’m thinking at this point in flower I should just leave her alone and grow. 7/6 It’s possible I found my upper limit on light intensity. I started to see some faint yellow areas appear on some leaves and there’s an increase of dry crispy leaf tips. So at least for this grow I think I’ve established that 75% power is the max I can do. For now I’ve backed off the lights to the last hash mark before 75%, which has most tops sitting at around 750 PAR and a few others at 850 PAR for a max DLI of 36.7. I’ll probably go back up to 75% next week.

La plante grandit de jour en jour et ses bud commence a faire des superbes filament orangé ,aucune carence pour le moment... wait and see

4/15 Fighting a soil pH issue. Learned I made some crucial mistakes this entire grow that compounded week after week until a few days ago and I have complete lockout. I was feeding every watering (rookie mistake). I tested runoff and it was at 1800ppm and 3.5 EC, I have done lots of flushing and got soil to an acceptable level of 800ppm and 1.5-1.6 EC. But my soil pH is testing around 4 and will not come up. I have watered with baking soda and it up near 4.5-4.6 now but I have flushed so much over last 3 days I can't stress the plant anymore. Leaves on the bigger plant are rust spotted everywhere and dying off. I will prob lose plant disappointing since it's so far along. I will still yeild something from it but had this not happened this plant would have been great it's super stinky and sticky right now and buds are dense but would have really stacked on and produced had this not happened. Other plant is chugging along its got same soil issues but showing no signs of stress yet. 4/16 Soil pH is still super low on the sick plant and continues to decline, I watered both plants with baking soda water and was able to get the healthier plants soil to 5.8ph. In a last ditch effort to salvage the sick plant, I cut off the fabric pot and transplanted to a planter I had with double the soil capacity. There were no roots stuck to the walls of fabric pot, the base had some but overall I caused very little damage to root system. I watered again with baking soda water and it's now at 4.4ph the fresh soil I put in planter was 6.8 and immediately after watering the new soil tested down to 4. I'm hoping I can get some leaching of buildup from the old soil to the new and get it balanced quickly. I was able to get both plants soil testing around 5.8ph and out of the extreme acidity. There are some spots here and there that are testing a little lower. The healthier plant was showing the slightest spotting all over today, I watered it to about 20% runoff with calmag. Hopefully neither plant get any worse. 4/17 repotting the plant seemed to help tremendously, it really frosted up and seems to have resumed flowering. The other plant seems to be about a 7-10 days behind. 4/20 Bigger plant has really taken on a purple hue, pistils are appx 15-20% turned. Other plant seems to be 7-10 days behind, this is the plant that was over watered in the beginning and was stunted.

Preperations for bloom

Hi dear smokers and growers!! 😎 Chilling Racoons here 😏 We will show you one of the new genetics of Royal Queen Seeds, the Milky Way F1 Automatic! 🤩 F1 seeds have unparalleled uniformity, impressive resistance to disease, great productivity and flavours and effects that will inspire you to grow these seeds again and again. So we are sure to grow big and stable plants, we have only to cure them well!! We are excited to try the Royal Queen Fertilizers like the tablets and the easy boost! They will give a big kick to our plants 🤩 🤩 🤩 We posted some of the RQS Ferts and Merchandising, look at the stuff, I am happy like a child 🤤 Royal Queen Seeds is one of the biggest seed bank in the world, in addition to a wide variety of high quality seeds, on their site you will find many accessories for growers and smokers. Take a look to our friends! https://www.royalqueenseeds.com ✅ 🌱#1 WEEK VEGETATIVE🌱 💉🔍Fertilization schedule:🔍💉 📅 EASY BOOST MIXED TO THE SOIL 50g/pot Both seeds germinated in 48H, after the root came out, we immediately planted the seed in the soil. We are growing MILKY WAY AUTO #1 in a 11L Plastic Pot and the MILKY WAY AUTO #2 in 15L Smart Pot. Seeds are directly planted in the final pot to avoid transplant stress. We planted these seeds in different pots to see if there are difference in growing and yield. Germination rate: 100%, Royal Queen, what a pleasure to grow their seeds. 🧐 🤓 Milky Way F1 data sheet 🧐 🤓 Variety: F1 Hybrid auto Genetic Background: Blue Mammoth x Blue Dream x Sin Tra Bajo Auto THC: Very high Yield: XXL Height: 55 - 75 cm Flowering time: 42 - 45 days Harvest: 70 - 75 days after germination Major terpenes: Farnesene, Myrcene, Pinene Effect: Creative, Euphoric, Physically Relaxing Flavor: Chocolate, Citrus, Pungent, Skunk Climate: Short Summers 💸💸💸💸💸 Buy Milky Way F1: https://www.royalqueenseeds.com/uk/f1-hybrid-cannabis-seeds/617-milky-way-f1.html _____________________________________________________________________ OUR GERMINATION METHOD STEP BY STEP We germinate all seeds in cotton pads because in my opinion is the best way, I'll tell you why. You should use cotton pads because it is one of the fastest way to germinate seeds, it is also one of the more reliable way because with these few steps, you could have a 99% of success if seeds are fresh (we store our seeds in a dark and sealed container in the fridge and they last years!). This is a NOOB-FRIENDLY technique BUT you have to respect some little and easy steps: 1️⃣take one cotton pad, spray it 5 times with water; 2️⃣dispose seeds in the sprayed cotton pad, remember to leave minimum 1cm of space between seeds, 3️⃣take a new cotton pad, spray it 3 times with water, face the wet side down and put it on the seeds of the first cotton pad; 4️⃣spray the dry side 3 times. 5️⃣put your "sandwich/es" in a sealed dark container of a sufficient size to store them, I use a plastic container (glass or plastic are equal) with about this size: 15x30cm .It contains about 8 "sandwitches". 6️⃣store the container in a dark place with a temperature from 17°C (23/24 °C are optimal)and more. REMEMBER: More light they see and colder is the place,slower will be the germination and lower will be the germination ratio. *(If your seeds are old, not good stored and with a low germination ratio, I suggest you to use Seed Booster. Old seeds and maybe stored in a very hot place for a long time may will be death and may will not never germinate). Generally a normal cotton pad is good for 3 seeds. If you follow these steps, you will hardly have problem of non-germinating seeds. I tried all methods (except rockwool cube) and in the last two years (and I germinated a lot of seeds) I can tell this is the fastest and reliable way. I loved to use paper towel but with this method is very easy to put too much water... I really hope that this "rule" will help all growers to improve their skills. ENJOY. _______________________________________________________________________ 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was incredibly fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA 💊💉💊FEEDINGS TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for an excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. -BIOBIZZ: CAL-MAG, great product to correct deficiencies without Nitrogen! ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

D29 - The start of the fifth week of vegetation. All is relatively uneventful, and all I'm doing is tightening the LST wires each day. Since transplanting the girls last week, the girls are quietly doing their thing, and I have yet to turn on the Blumat system. The soil was quite most when transplanting, plus I keep the humidity high to deter thrips. I had (have?) thrips in my other tent and want to avoid them getting into this one. D31 - Last night I finished hooking up the Blumat system, but I didn't turn it on as the soil moisture was still sufficient. I really should say that I thought I didn't turn it on, but when I opened the tent today, #1 was completely flooded, with a good 2-3 cm of water in the tray. It turned out that the shut-off valve was slightly off-center, and that was enough to allow water to trickle through. Ugh. Now I have to wait even longer until I can turn on the system. Not a huge deal as long as it is functioning in a week since I'm planning a short trip for Easter. D33 - LST D35 - The last day of the final week of vegetation as the girls have started to go into flower. I did additional LST and some minor defoliation to eliminate some random leaves. Finally, I turned on the infrared diodes in my grow-light but will hold off another couple of weeks before i turn on the UV diodes.

Valió la pena totalmente, muy agradable al fumar 😍

Questa settimana ho dovuto scalare le ore di luce purtroppo visto che in box ho due fotoperiodiche , nel complesso la #2 sta andando alla grande mentre la #1 si è ripresa da poco da quasi sicuramente uno stress che ho causato io alle radici , la #2 mi sta mostrando i segni di un inizio di fioritura, spero vadi tutto bene buona visione :)

This week was all about watching Tricombes... Her buds are fattening up nicely, especially since she has received no training really.. She is smelling my balcony up with hints of sexyness everywhere.. She has been an absolute pleasure to grow outdoors.. Only issue this week was humidity..It's really difficult to control outdoors...that has been my only challenge.. I brought her in for a few pics.. And this is what she has turned out to ❤️💚❤️💚

Day 75, close to the end !! Still flushing and getting ready for harvest ! In approx 6 days, I'll harvest my first one, the rest a bit later, not ready yet. So I got a second hand furniture that I turned into a drying box to start drying while the rest is still growing. I'm so excited for the harvest !! It has to be soon cause I'm running out of weed ! I won't wait the curing to be done to start smoking it lol. A huge thanks to all the growers who helped or commented me, I learnt so much on this website, please feel free to ask for help, I'm not an expert but I'll always try to help the community :) Good luck to all !

Day 38: I am getting the big 50L fabric pots primed and set with the eco-thrive Living Organic Soil . I am a few days over the update so the photo/video is from day 36. I am in the process of rebuilding too so time has been a luxury.

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

Hola Farmers! Una semana mas y ya colocaremos las mayas metodo scrog.. y pasamos a flora, aprovechando para fulmigar con preveentores, Espero que os guste familia!!

The girl seems to be ok. She's going into flowering mode in a few days from now. I let her recover from defolation first.

Hello growmies, All is well and going well so can't say anymore then that really lol pics speak for themselves u know lol

Hello! We are in week 7 now. Girls going so well, they looks so happy :) They get more light from yesterday I hang mh ts 600 so all together is 50k lumens now :) So proud of them atm and hopefully will be like that until the end :) how do you like my grow? Let me know what you thinking :) thanks for your attention! Take care guys! Update Day 45 i found a little dark points on some od the leafs. I recive its cal and mag deficiency. I check soil pH was 5.9 🙈 i rise it up to 6.5 and waiting for results:)

Semaine très tranquille, j'arrose toujours tout les 5 jours environ et en ajoutant 1 fois sur 2 sur BioEnhancer. Intensité de FC3000: 50% Ventilation : extracteur 6 pouce mars hydro power 2/10 ( on 24h/24h) + 1 ventilateur oscillant ( on 12h/24h) 🍊👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍊 Venez me voir sur Instagram ✌️👨‍🚀 https://www.instagram.com/hou_stone420/