I've reduced the EC to 1.4 this week, a bit lower than I initially planned for, but I decided to keep it like that, at least for the week. There isn't much going on, aside from the continuing fox-tailing on the NYC and BJ. I will probably chop the CBD very soon and maybe the SAD shortly after.

tried rapid 8 times nutrient tea and she act just fine

Hey fellow green thumbs! 🌿💚 The day has finally come—our Auto Northern Dragon Fuel from Super Sativa Seed Club has been harvested! After an exciting journey, we’re thrilled to share the details of this incredible plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our beautiful Auto Northern Dragon Fuel was harvested yesterday. After weeks of careful nurturing, the time was right to bring in this amazing plant. 🌿🌼 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Northern Dragon Fuel: • Bud Structure: Dense and sticky, with an impressive trichome coverage. The buds are beautifully formed, showcasing the robust genetics of this strain. • Aroma: Even in the drying phase, the rich and potent aroma is unmistakable. Expect a delightful scent that hints at the powerful experience to come. • Trichomes: A thick layer of trichomes covers the buds, promising a potent final product with a great flavor profile. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Northern Dragon Fuel: • Characteristics: Known for its robust structure and dense buds, this strain has shown remarkable resilience and impressive bud development throughout the grow. The final product promises to be potent and flavorful, thanks to the thick trichome coverage and rich aroma. • Harvest Expectations: High-quality buds with a strong aroma and potent effects. The slow drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ Drying the entire plant slowly helps retain more terpenes, which are responsible for the plant’s aroma and flavor. This method also helps preserve the potency and quality of the buds, resulting in a smoother and more enjoyable experience. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week’s harvest has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Northern Dragon Fuel at Day 75 has been a rewarding experience. With the plant now drying, we’re eagerly awaiting the final product. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a high-quality harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney

29.3.25: This week has flown by. Everything is looking good. I've been watering alternatively with Bud Explosion PK booster and Sea K(elp) by Greenleaf nutrients. Also, plain water I'm between feeding. I watered yesterday and had run off from 2 pots, so I will wait for them to dry out sufficiently before watering again. Trying to mitigate the risks of mildew and / or mould due to too much water / humidity. 31.3.25: I cleaned out the tent and disinfected it again. Had a bit of runoff, which had left a bit of residue on the floor. Today, I took all the photos and videos whilst cleaning the tent. The pots had sufficiently dried, so I will water with the Greenleaf nutrients. I watered with dechlorinated water PH'd between 6.2-6.4. 6.5 litres contained the following nutrients: ♡ 1/4 Tsp Mega Crop Part A. ♡ 1/2 Tsp Bud Explosion PK booster ♡ 1/4 Tsp Sea K(elp). (All by Greenleaf nutrients). Thanks for hanging out 🍃 ✌️ 💚 🙂

These two girls are starting nicely. Still nursing the third pot.. I’ll update on it later as well. ** Update ** The third girl popped on 9/8. She’s looking healthy as well

good !

9mar

whatever it is, it's a pity, but you can't fight with Nature :) as far as I can see from the drone flight, the girls are simply gone :D:D they are under water,.... it's a pity.... it rained a lot during the week, there is a river 300m away which flooded, here is the result: D I see this for the first time in 9 years .... well, nothing new automatic seeds, already thrown into the ground :) so I will wait for new girls :).

Beginning of week... The flushing has begun! I flushed with 1L of just pH'd filtered water.. Then flushed with 1L of distilled water.. Not pH'd.. Havent used FloraKleen yet, wanting to get the TDS down as much as possible, then using the FloraKleen to remove the leftover nutrients and whatnot.. Next day... Flushed with FloraKleen in distilled water pH'd to 6.3.. Runoff is now reading 50 PPM 6.3 pH.. She is doing great.. Can't wait to see what this strain is all about! Mid week.. Man, this plant smells so amazing! I can't wait to taste this girl! I've just been giving her refrigerated distilled water daily.. I'm gonna start using JUST rainwater pH'd to 6.2 - 6.3 once this gallon of distilled is used up lol.. So far, I've gotten the runoff TDS down to 30 PPM.. Perfection! Can only get better (...or stay the same.. That's fine too lol) from now till harvest.. I may do the 48 hours of darkness.. But that's next week.. Love this strain so much! End of week.. I don't think this strain is a colorful one.. Which is fine.. Quality is still there for sure! The smell is awesome! Milky/cloudy trichomes.. She should be ready for harvest in another 7 - 8 days! I can't wait to taste this girl! Just plain, low TDS, pH'd water till then. On to the (last) next week!...

Wow, what a week. Finally installed my Inkbird humidity controller and look at the results. Massive difference having the VPD on point at 25°C and 60% RH. A video at the end shows my setup. Did a bit more supercropping this week and more defoliation to keep all tops at the same level, this will make the Scrog setup alot easier. Please like this and comment any questions or thoughts. Peace out guys. Charlie

Next Week in our Outdoor Grow is here. The LA Kush Cake is topped as you now, and now she/he get defintly even more bushy what we wanted to. The "Main" Stem is now 4,9cm wide. The Plant complete is 1,5m in heigh. There coming a lot of side brenches what is actually hard to bend down. But doable... It would be defintly better when we have more Sunlight, but the Weather is like we know it from Germany "pure shit". So come on... Lets just hope it will be a small Tree then ;-) Thanks to the whole Zamnesia Team for this Strain

It's becoming a fucking bush! 😁😁😁

Well growmies ive been looking forward to the FastBud Tester 2307 , the more she went into flower the more the frost would build up , and that's when the terps came out 👉 Sweet , fruity 👈 Buds are tight and full of frost 👈 Couldn't of asked for better Genetics 😉 The smell coming from this girl during the entire grow was just dreamy 👈. Of course I have no clue to what she is but I like it...... Maybe FASTBUDS attempt at a Watermelon 🍉 Strain???? Amazing Job FASTBUDS 👏 I would definitely recommend once they release this one 👍 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 All Weeks NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9 👌👌

Plants started growing very fast. 20 hours light a day and 140 ml water for 2 plants so 35 ml each plant. (70ml -35ml one plant- morning, and 70ml -35ml one plant evening). From Monday I will start giving 200ml water 100ml in the morning and then the rest in the evening. Ventilation almost 24 hours, They are getting bushy and the color looks healthy green. I am excited. Purple Punch ( the right one) does not have the smell but the Gelato Cookie D'ohpe started smelling from the 3rd week, it is not strong, it is smooth, enjoyable. I still use trigger spray but I stopped triggering directly on the plant to avoid any fungee or toxicity, I just keep the soil moist. I surrounded them with kitchen foil around the lamp to have a more effective light. It reflects the light and the light goes everywhere. This step has been done because I have only the 60w LED each plant so I try to provide the maximum strength this way, and by keeping close distance also. The lamp is not hot so it ain't gonna burn the plant I had checked it before. I just purchased today a 600w LED because these plants look so good so I wanna provide the best circumstances for them. 4th-week 4th day I a just waiting for my delivery my 600 W grow LED light will come. From today I started watering with 50ml each plant 2 times a day so all together 200ml a day. Plus I always use trigger spray for the soil to be kept wet. They are looking better and better. Nice color and bushy appearance. Wonderful. I realized some holes on the Gelato Cookie D'ohpe's leaf but there is no insect I was checking. I do not really know the reason for that. Tonight I will set up the new 600 W LED so I am changing the current 120W. Big Step forward! It is not that easy that I thought, the lamp is great but the temperature raised up a lot, so needed to buy a fan also and the humidity went down. It is not easy to find the proper solution to be acceptable, good temperature and humidity at the same time. So I decided to program a 6/2 schedule, so 6 hours light on and the fan always with 15 min more, and 2 hours off so I do provide 18 hours light and 6 hours darkness but it is divided. The plants can rest after every six hours and use the energy they received. Last day of the 4th week, LST has been done with the Gelato Cookie D'ohpe, both are growing rapidly, let's see what the 5th week brings! End of he week Gelato Cookie D'ohpe is 25cm, Purple Punch is 20cm😇

Que pasa familia, estoy de vuelto ya tenemos la 3 semana y ya se acerca el trasplante a macetas definitivas. He quitado una planta que era la más pechera total… no pensaba sacarla adelante y seguramente quite alguna más. Hasta ahora no alimente nada con nutrientes solo agua, pronto con el trasplante empezaré abonar algo con Advanced nutrients , puede que algunas las plante en 7 litros y otras en 11 , y pondré al final 2 armarios de esta variedad. Nada nuevo todo va bien sin contar la pocha que quite que es porque no alcanzaba las demás y de genética pues no me gustaba mucho fue propia elección no porque estuviese mal. Os dejo unas imágenes y nos vemos otra vez la semana que viene, buenos humooos 💨💨💨