The Grow Awards 2026 🏆
Likes
Comments
Share
@WeyWey
Follow
Had a nice harvest, and I look forward to try the strain
Likes
9
Share
12/5 Gotta say I am loving how great she is growing all the new growth is coming in perfect.. I made some organic tea out od the Foxfarms Acid lovers dry fertilizer and gave her about 2 and a half cups.. Shes a little small by all accounts but you never know what might happen
Likes
14
Share
Nothing much to report. She’s settled in and working on full flower. Cleaned a couple low hanging leaves, no more snipping past week 3. Up to every other day watering, roughly a liter. She’s been a breeze so far. Till next week.
Likes
52
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Likes
20
Share
Pretty happy with the grow and the harvest, the drying went well also! Each grow highlights changes for the next and this has been no different! I'll be making more training adjustments in the next runs to try and refine the vertical scrog and get to the point where it's a wall 1 bud thick! I know it will get there in the end it's just like relearning how to do a horizontal scrog! I just need to predict the way the plant will respond when the light is from the sides! Bravery and brutality during pruning I think is the key! 😂✌️💚
Likes
15
Share
These lady's have formed very nice buds even have a few show purple 😍 this strain has been very good can't wait to see war other color pop off right it's the start of 6th week flower
Likes
24
Share
SWISS DREAM ROSE 🌹 CBD AUTO KANNABIA SEEDS Week #10 Overall Week #7 Flower This week she continues to shine ✨️ 😎 her buds are a beautiful purple color then you see the sparkle of the trichomes against her purple buds that have white and orange hairs throughout. Once again another example of the great genetics from KANNABIA SEEDS!! Honestly just blessed to be growing CBD organic medical marijuana. Thank you to KANNABIA for all the support 🙏!! Additional thank you to FOOP!!
Likes
9
Share
Week 21 for Black Lebanon by SSSC Shes been doing alright no real issues no pests/ no bud rot. Now just to watch her bulk up her flower size. Not watering the plants whatsoever with this weather. Weather has been terrible just storms after storms of heavy rain 😐 dark clouds not much sun, we still have more rain coming with highest of 21 degrees...😒
Likes
20
Share
@DrGanj
Follow
Tapering nutes off for the flush. Also added a small amount of Barley as a top dress to help her finish off.
Likes
93
Share
@Ferenc
Follow
Week 10, so from today I stopped watering the Gelato Cookie D'ohpe and on Saturday no more light as well. Sunday is harvest day finally. Not much changed, I raised up the water with 25ml so the Purple Punch gets 200ml 2 x a day. That's all, since last week I started giving 13 hours darkness and 11 hours light and from Monday will be 12/12 after I harvested the Gelato Cookie D'ohpe and I can use the tent only for her. Fertilization will happen on the same days. Sunday fun day, Gelato Cookie D'ohpe is harvested. Purple Punch left alone. From tomorrow I will switch the light schedule 12/12. End of the week Purple Punch is 43 cm.
Likes
107
Share
@Roberts
Follow
This is the end of strawberry cheesecake auto. Was a quarter pound plus grow barely. 114.4 grams dry off 1 plant. Was a overall good grow. Does not like warmth or humidity. Thanks again seedsman 🤜🤛 Thank you grow diaries community for the support. I really appreciate the likes, and follows of my profile and grows. A extra thanks to all my YouTube subscribers.
Likes
28
Share
Likes
4
Share
Booommm! Llegó la hora tan esperada Farmers nuestras flores llenas de resina acabandose de formar, la verdad que estas genéticas ayudan mucho al desarollo del cultivo espero que os guste!! Salut y força al canut!!!
Likes
11
Share
Trying flawless finish for the first time, hoping it will help with this rushed flowering stage. Really unfortunate to have to cut this one short, but some things in life are out of our control... Anyway, harvest is currently curing. Check out the results and leave a like/comment cos I'm always looking for constructive criticism! Lets gooo
Likes
174
Share
@DreamIT
Follow
😬😆UnCoNvEnTiOnAl GrOwTh 😆😬 ____________________________________________________________________________________________ 🤪 3.3 ... 🤪 4.3 Yo, I didn't forget about you. The life part where plants did not have the upper hand over cultivation in the last periods, but it is returning everything to normal and I can concentrate on work left behind. New photos soon to resume where I had "abandoned". There were no big news on these particular plants, the bonsai grew by devices and were recently adjusted due to lack of time. I took more than 40 clones from the two monstercropping two-style bonsai that I mandated in bloom last week. The Honey Cream in the 0.5 jar has become very high, I made a lollipopping and a defoliation in the second week of flowering and today I will provide for further cleaning before watering. The mini bonsai in Hesi Boost flask suffers a little, but it is due to the fact that a so big plant should not be in a little small vessel, otherwise, as you can see, suffer, but it's just my fault (as you can notice XD ) If you have come this far attracted by boobs, leave a like and a comment 🤣💚💚💚🦄 🤪 5.3 🤪 6.3 🤪 7.3 🤪 8.3 🤪 9.3 ______________________________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 🍊💚 Red Mandarine F1 🍊💚🌱🍭 Sweet Seeds 🍭🌱 📋 Details 📋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 55% Indica / 45% Sativa 🎄 Genetics ▪️ Red Poison Auto (SWS39) хCalifornia Orange x Skunk hybrid) 🚜Harvest ▪️ 400 - 500 g / m² 🌷Flowering ▪️ 49 - 63 days ✨THC ▪️ 16% ✅CBD ▪️ 0,2% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ N/D 🎂Release Year ▪️ 2019 ___________________________________________________________________________________________ 👀📷🥇 Follow the best photos on Instagram 🥇📷👀 https://www.instagram.com/dreamit420/ 🔻🔻🔻Leave a comment with your opinions if you pass by here🔻🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟
Likes
10
Share
@Eauderay
Follow
I think I was mistaken about her parentage, the more she develops and the more I see some Blimburn S1 I found in my Blimburn cookie stash I grew a year back, I can see my old diary on here and it is a match. So cool when you can see your past grow and not just rely on your memory 😁 Very strong and resistant to all 😁... But light bleaching so I had to higher up those voost leds, they are super duper and so far perfect but I need to find and fine tune the perfect goldy lock zone in my grow room for my plants😉😂, you know not too hot and not too cold 🙄😀 She smells sweet, lemon mixed with vanilla, skunk and feels greasy.