Processing
Likes
Comments
Share
@
Follow
Likes
14
Share
Day 74 of flower, all the colas are beginning to topple over due to how dense n chunky they are.the sample nug takin at 9 weeks was excellent super gassy skunky LOUD! Pretty sure im gonna take them within the next few days.
Likes
3
Share
Today was plant care day -defoliation of all plants -huge watering 4L ( usually only 2L) -general check up / applied some more LST for better air flow The LSD has such a nice smell with some of the most beautiful purple buds i’ve grown yet! Atm my favourite at the tent
Likes
5
Share
@Bluemels
Follow
Tag 68: Noch eine Woche bis zur Ernte. Zum Glück. Die Blätter sehen auch echt nicht mehr gut aus. Vermutlich war ich beim ph wert einstellen noch zur vorsichtig, und er war noch etwas zu hoch?!? Ich traue mich immer nicht soviel von Säure zum senken rein zu machen 😬
Likes
6
Share
@sa2_gr
Follow
Heu guys ! Plants start to pre flower, everything is going good, few nutriments fails but overall it's pretty much ok Pretty sad about the Zake and the Shimo in the front that pretty much had no stretch 😓 Cant complain since im working from seeds ! See ya next week ✌️
Likes
15
Share
Looking good. A bit fuller. No major changes, slow and steady. I’ve been really excited to grow these ever since they arrived as freebies with one of my seedsman orders. One is getting big enough I might even add a few bendy things to open her up a bit more and hopefully add a few more bud sites over the next few weeks. 🌱 👊🏻
Likes
27
Share
~ FASTBUDS TESTER #2205 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked both seeds for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged which usually takes roughly 24 hours. These seeds however didn't follow the rules and took their fine time to pop out their tap roots. 12/3- Today their tap roots were about 1/4 to 3/8" so at 11 am I transferred them into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By 10pm the #1 seed had her cotyledon leaves opened ...waiting on the #2. 🧐 I was concerned that one of the seeds may fail as she took so long to germinate so I soaked two more as an insurance policy. Naturally, BOTH of the second set of seeds popped their tap roots within 24 hours. One of the first round seeds failed to germinate which left me with three viable seeds, one in a pellet already and two showing tap roots. I planted both of the second round seeds into the same peat pellet that I had previously soaked. 12/5- Well this is Day ONE for the #1 FBT #2205 and I anticipate seeing one or both of the second round poking their heads out real soon! I'll keep them in the covered/heated Jiffy tray until I see their roots beginning to emerge from the peat pellet, then I'll transfer them gently into their respective fabric pots. The #1 will be going into the 4g Gronest pot from FastBuds and the #2 will reside in a 3g pot by Wraxly, which I'm trying out for the first time. 12/7- Yesterday I checked the #1 tester and she had roots starting to emerge from her pellet so tomorrow I'll transfer her into her 4g Gronest pot. The second round seeds finally made an appearance and I decided to yank the smaller of the two keeping me from having to stress them when I separated them.... this will be Day One for the #2! She looks really healthy and I'm confident that she should be ready to transfer into her fabric pot in the next couple of days! 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙
Likes
84
Share
EM#1: I can hardly believe that she weighed less than WW#1..she towered over her and her buds were as big..just not as dense I guess. Her main cola was a little over a foot and weighed 110g wet. I guess she just had a higher leaf-to-calyx ratio and leaves weigh a lot less... She was a desirable EM pheno..dense, stocky, sturdy branches, very resinous...just a little too leafy. Her total dry weight was 77g. Update 9/2: 11 days of curing and it's starting to really wreak when I open the jar. Very pungent..hints of ammonia in the jar and has that sweet skunky smell when incinerated. I set fire to it today and thoroughly enjoyed the experience. It's got that same earthy taste I remember from when it was first dry, but with "herbal" tones on the aftertaste. The buzz is a really intense head high for about 5 minutes, then levels out to a good body stone. I like it. A lot. EM#4: My tablet died and I was unable to get any photos of her being harvested. Her big bent main cola weighed 115g wet and was about a foot long if you straightened it out.. All the extra branching caused by the failed FIM and super-cropping really paid off. This plant smells AWESOME...very exotic/spicy. Smells great, tastes great, excellent buzz... she was just too tall and lanky and a pain to deal with.. Her total dry weight was 101g. Update: 8/28 - I'm determined not to smoke any more of her until next week and she's better cured....well...maybe just a little....no, not until next week...well, maybe tomorrow... Update 9/2: I smoked some more today and wasn't as thrilled with it as the first time..maybe because I had just smoked some EM#1 ;-) EM#2: She is dead and drying! Her main cola was a bit shorter than EM#1's, 11 inches, but was fatter and weighed 121g, wet. One of her other colas weighed 100g. She's very similar to EM#1 (kinda leafy), so I expect her to really lose a lot of water weight. I'm guessing she'll weigh around 85g dry...time will tell. Update 9/4: Total dry weight: 91g It's only been curing for 2 days, but had to sample it. Bam! This plant was my favorite tasting EM of the crop thus far. Same great taste as EM#4, but even more pungent. I smoked about 6 quick bong rips and got a nice uplifting head buzz for an hour that leveled off to a good mellow body buzz for another hour or so. EM#3: update 9/2: She might actually finish in about 10 days or so. Plenty of time to hit her again with cha ching, terpinator, and bud candy... update 9/10: HARVESTED! This plant took more than 4 man-hours to manicure and took three 18" drying baskets. So many buds. I will be amazed if she comes in any less than 150g of dried bud which would be amazing, but considering her space requirements and duration of bloom, probably not worth it...smell, taste, and effect could still sway my opinion.. update 9/14: Total dry weight: 224g!!! (Half-pounder!) 74g of that was lower-grade bud which I'll use to make confections and e-liquid. Took a couple bong rips..she got me stoned, but she needs to cure. Still a little green-tasting.
Likes
24
Share
@420SYL
Follow
The plants recovered well, and the buds are swelling 💪🌳 I changed my pH pen and switched to AC Infinity 👌 The trichomes on both SM&Q2 are already nicely milky with quite a few amber ones, so I think today was their last watering. I’ll harvest them in 2–3 days!
Likes
424
Share
Hello, schönen Sonntag euch mal wieder =D 🌞 🌿 Wochenupdate Die Woche lief erstaunlicherweise echt ruhig =) Wir bewegen uns langsam, aber sicher aufs Ende zu. Den Mädels geht es wieder gut, yaay :D 💚 Anfang der Woche habe ich mich dazu entschieden, einen großen Wasserwechsel durchzuführen. Ich habe hier wirklich eine Weile mit mir gehadert, ob ich diesen Schritt gehen soll oder nicht 😅 Vor kurzem waren ja erst die pH-Probleme, unter denen sie zeitweise sichtbar gelitten haben.. Noch mehr Stress zu erzeugen war für mich keine Option . Allerdings hat mich der Gedanke gequält, dass ich durch die pH-Turbulenzen und die dadurch super unregelmäßigen Top-ups – um den Wert bis zum Eintreffen von pH Plus überhaupt wieder nach oben zu schieben – nicht mehr genau nachvollziehen konnte, wie mein Reservoir tatsächlich dasteht. Am Ende habe ich mich dazu entschieden, das System für die letzten Wochen oder Tage, je nachdem wie viel Zeit sie durch die vergangenen Probleme noch brauchen, zu etwa 3/4 zu resetten und nochmal sauber einzustellen =) Daraufhin ist mir nochmal der pH weggedriftet für 2 Tage, aber diesmal konnte ich das gut mit pH Plus auffangen. Für die nächste Runde wird auf jeden Fall Kaliumkarbonat mit eingeplant, um solche Späße von Anfang an zu vermeiden =)📊 Hab hier mein Wasser ein bisschen unterschätzt .. :D Rückblickend war die Entscheidung zum Wechsel genau richtig. Alles läuft wieder sauber und stabil, die Mädels sind happy und ich auch =D 🌱 Aktuell gebe ich nur noch täglich fünf Liter Wasser mit – Calcium, Magnesium, pH auf Res – hinzu. Damit fahre ich die Lösung langsam runter und halte den Wasserstand 📉 🌸 Pflanzenstatus & Training Blueberry Cupcake reift langsam aus =) Ich denke, sie wird als Erste soweit sein. Sie ist schön gefrostet ❄️, hat nochmal etwas zugelegt an Volumen und ihr Geruch hat sich gesetzt 🍇 Wirklich angenehm klar nach Blaubeere, nichts mehr Stechendes. Ihre Buds sehen auch einfach lecker aus 🤤 Bei ihr habe ich auch schon mit den ersten Trichom-Checks begonnen 😊 Purpz ist auch wieder da :D 💜 Sie hat wie BBCC noch etwas an Volumen gemacht und geht vermutlich ebenfalls langsam in den Endspurt. Ich bin echt gespannt, ob sie sich noch etwas verfärben wird in den nächsten Tagen, nach den Strapazen. Sonst auch wirklich schöne Buds bisher =) Den Geruch kann ich gar nicht mehr definieren 🤔 Süßlich, aber nicht penetrant vielleicht :D Auf jeden Fall nicht schlecht 😊 Hier checke ich aktuell auch schon langsam Trichome. Notorious sieht aktuell nicht schön aus, was leider zu erwarten war und klar auf meine Kappe geht ..🙃 Trotzdem, und das feiere ich wirklich, stackt sie noch leicht nach und macht wieder einen aktiven Eindruck🔥 Ihre kushige Erdnote ist noch vorhanden, und auch sonst macht sie bis auf die abgerauchten Blätter einen soliden Eindruck 😊 Mal schauen, wann sie so weit ist. Guzzlerz ist an Notorious optisch auf jeden Fall vorbeigezogen, sie hat schön zugelegt 🌿 Ich finde trotzdem irgendwie, dass sie aussieht, als würde sie am längsten brauchen =D 😅 Ihren Schimmer hat sie, finde ich, immer noch behalten 😊 Und auch hier freut es mich, dass das noch etwas geworden ist =D Nächste Woche wird sicher gut🔥 ⚙️ System Jetzt wieder Top-up-Logik weiterfahren 🔄 VPD: 1,20 kPa CO₂: 700–800 ppm EC: 1.400–1.500 µS/cm PPFD: 1.000 µmol/m²/s Danke mal wieder für die Zeit 😊 Wie immer eine schöne Woche und gesunde Plants euch 🌿
Likes
3
Share
@Lazuli
Follow
I could have pushed the plant one week longer but im on a scedule
Likes
24
Share
@Doofy
Follow
She looks ok 👍 Looks like beginning fase of amber, not yet, but still, very close!
Likes
31
Share
@MrJones
Follow
MrJones VIPARSPECTRA XS1000 LED 📜 SUMMARY - I have been given the opportunity to run the next generation of LED lights by VIPERSPECTAR, the XS1000! I set up a Stealth Cabnient and moved 3 Cream Manderain Auto XL.s under these lights, the cabinet set up is automated with WIFI light controllers, and INKBIRD Temperature and Humidity Controllers, I am very excited about this opportunity! Specs and Discount Codes Listed Below. 🔹🔹🔹🔹🔹🔹WEEKLY GOALS 🔹🔹🔹🔹🔹🔹 🌞Environment - 80F and 50%Humidity - using Humidfyer as needed. 💧 Feeding - Feeding with FOOP Canna Organic Nutrient Line 🍃Training / Keeping Stems Stable and Strait 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡 Vegetation & Flower (new) Viparspectra XS-1000 Release on March 15th. 🔹🔹🔹🔹PLANT UPDATES🔹🔹🔹🔹🔹 🌱 Plant #1 - Week 4 this plant is stretching sideways and is about 14 inches wide not. 🌱 Plant #2 - Week 4 this plant is stretching sideways and is about 14 inches wide not. 🌱 Plant #3 - Week 4 this plant is stretching sideways and is about 14 inches wide not. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️Monday 03.15.21 / Rge gurls are recovering well from their topping and training! ▶️Tuesday 03.16.21 / Feed with 30 ounces of FOOP, the girls are doing extremely well! ▶️Wednesday 03.17.21/ Admiring their growth - keep adjusting their tie-downs, the plants are about 14 inches wide - across and about 7 inches tall - there are so many bud sites being produced here and the plant is about to go into flower, I am hoping for amazing results. ▶️Thursday 03.18.21 / Fed tonight with about 30 ounces of FOOP Nutrients - I just can't say enough good things about this product so far! ▶️Friday 03.19.21 / The sister plants of thee ladies are in flower, these girls are entering into flower a little slower due to more aggressive training, but decided to switch them over to the Bloom Regiment! They're kicking ass! ▶️Saturday 03.20.21 / Fed with about 30 ounces of Bloom / FOOP ▶️Sunday 03.21.21 / Fed with about 30 ounces of Bloom / FOOP 🔹🔹VIPARSPECTRA XS1000 LED🔹🔹 Amazon US: XS1000 10% off: in10MrJones http://yx-8.cn/0y-6 XS1500 5% off: in15MrJones http://yx-8.cn/0yA XS2000 5% off: in20MrJones http://yx-8.cn/0y2Y XS4000 5% off: in40MrJones http://yx-8.cn/0y5k Amazon Canada XS1000 10% off it10MrJones https://amzn.to/38udUVe XS1500 5% off: it15MrJones https://amzn.to/3esVUyr XS2000 5% off: it20MrJones https://amzn.to/3l5zAfg XS4000 5% off: it40MrJones https://amzn.to/3l7k5Uj
Likes
20
Share
@usere
Follow
Harvest time, the flowers seem ready. The seeds were given as gifts and this was my first scrog. Given the high summer temperatures I thought I wouldn't even finish, I'm satisfied in the end. a couple of weeks to dry everything and then the fun begins.
Likes
20
Share
@Rob96
Follow
Starting to see leaves browning buds still all fine doing well, going to keep eye on it and see how it goes next few days and try to find proper route of issue, overall still please as buds all seem totally fine
Likes
19
Share
@Changman
Follow
What an awesome week its been aside from some heat and light stress the ladies are recovering and loving life