Day 57 - plant 1 still going great, stretch over, building bud mass. Plant 2 also doing well, looks about a week behind #1, and the leaf discoloration on upper fan leaves hasn’t abated. I’ll look into that more this week. Day 58 - drunken “deer gnaw” defoliation of the canopy fan leaves. Day 60 - Houston, we have a problem. Vent fan isn’t venting. Will have to research and/or swap out. Humidity through the roof. Bad timing! Day 61 - fixed extraction fan. Knocked tube off of inlet somehow 🙄

Week 4 over for wa girl. Soil PH was off this week and the ppm levels was way too high after I tested my runoff. So this week was mainly about flushing and trying to get the medium back to ideal conditions. So far she’s recovered well and been cruising ever since. There are a lot of new undergrowth so I need to lightly defoliate and tuck in some leaves to allow even light distribution on the canopy. AC got worked on too so my temperatures have drastically changed. I could see stress on a few of my plants already. Really interesting plant though, the smell has started coming out and it’s lovely 😍 Let’s see how everything goes. Take care beautiful people

Growing was quiet hard as it just wouldnt respond will with training technique such as super cropping she hardly stretched when switched to flower and grew slow during veg but can not say till I do another run and do things different and as it was my.first time also growing from clones

This little girl started her journey on April 4th with germination into a water glass and finished up on June 27/20 – Day 78 from germination. She was a fun grow and was very resilient through the whole run. She spent most of her grow time in a 20/4 light schedule. She formed nice frost levels and stayed to a very nice and manageable height of roughly 20” tall without topping or bending her main stem. She was not as fussy about nutrient levels and took them well. She does like her medium on the dryer side though. Small little auto bush of OG Kush crossed with Indica genes😃 She would make a nice a plant to run while you are vegging out some photos for 6 or 8 weeks as she is not very big in size but will swell up and yield decent weight👍 She was grown in a 3 gallon fabric pot with coco coir and maybe 15% perlite. She was fed salt based nutrients……..so sorry but they are flushed out and that is what I am more comfortable with. Focus on the early growth with microbes, fungi and kelp!! She was fed the normal pattern with pH being held around the 5.4 to 5.8 range in feeding. Then as flower approached, I gave the pots a more consistent look at the runoff numbers and she was running 7.8pH coming out of her!!!!! WTF. She stayed in her pot that she was planted in and fought this issue all through the rest of her grow. The pH issues started surfacing around week 3….as we headed into flower of course. Scratching my head for weeks, I ultimately didn’t change anything other than really low pH feeding going in…….below 4 idea. For weeks she had 3.9 water going in and still getting 7.8 running off. I initially felt it was related to cheap fabric bags so I cut slits in the very bottom of the bags that stayed and tried transplanting other girls into plastic pots, which it can be fabric pot issues but I am not as convinced anymore for this run that there was an issue there, wasn’t sure about giving her Magnesium on top of Magnesium and therefore did I mess her up good on the inside early on in week 2 idea, out of options I changed back to RO water and that seems to have solved my issues……I was using tap water that was not filtered this run🤬 The pH was high so that was adjusted but with the ppm being at 185 to 200 range I chose not to buy a filter and just dechlorinated the water only. I was tired of lugging 5 gallon water bottles in and out of the basement😃 That is a difference from all other grows…..silly for not catching this by week 4! So…….back to lugging bottles in and out of the basement😂😂😂 She really started to take shape around weeks 7 and 8 and formed a beautiful little cannabis plant and grew to 20” tall and roughly 18” wide. Main focus with her was to just perform LST on side branches and let the top go…….I wanted to just let her go and see what would happen to her main cola for size and height……plus I don’t do that…….I always bend over the tops on my grows so this was a little different for myself. She grew very nice leaves and a lot of them. This pheno had a lot of leaves to her and that is fine……its not really my first choice in characteristics of a plant though..…..so much more work at trim time……Green Poison XL Auto, SWS71, was a dream to trim👍 as a comparison!! She didn’t fox tail very much she firmed up her buds towards the end. The resin production was a little slower coming out in her but by week 7/8 she was getting pretty impressive😋😋😋 White and sticky!! She smelt of woods with citrus notes…..works for me👌 There were no issues at all retaliated to pests or bugs……I threw in a couple sticky traps but there weren’t any to catch. She handled the high humidity in this run great and there were no signs of any powdery mildew👍👍👍 She is a very stable strain from Sweet Seeds! Day 63 was last feeding, flushed for almost two weeks. Rezin and Liquid Weight still given for one of the weeks but the last week was plane water. In hind-site I think I should have hit her with some Flawless Finish to help get that last bit out of her. She did feed on most of her nutrients but some of the lower leaves were still more green that I would have liked. She was cut down on day 77…..11 weeks is about what I suspect looking at her in week 7…….this was roughly 8 weeks flower time……makes sense😃 She grew for 75 days and then I decided what the heck…….she needs a hole in her stem to stress her out😃 I didn’t try breaking a branch but rather drilled a hold into the base of her stem……something new to try out. I think I will try more holes next time….max 3 I think……then I want to run a couple with cracking their stems and see if there is a difference👍 I feel more in control of a drill and its accuracy vs bending branches and they snap where they want to…….anyway it was worth a try!!!! Worst case, it made it easy to hang her as a whole plant to dry😃 This girl battled pH issues all her life and as a result the buds were not where I would have liked them. There were not fluffy…..but here were not as hard as I would like for rolling joints, so the whole girl went to concentrates She dried for 7 day as a whole plant, 2 days more in smaller branches, then 1 day curing in jars before dry ice sift. She yielded 74g of dry cured buds, 2.65 ounces. Not bad…..I don’t think her buds would have gotten a lot bigger but they certainly would have had more weight if they firmed up…..grower issue, not genetics. So…..lets make some rosin from this girl🤩 The yields on this and making her hash a perfect colour are not what this process is about…..let’s get that out of the way right away……this is about another way to enjoy and consume my cannabis for my own relaxation and medicinal needs. Taking pictures of rosin is always a challenge…..it is always dark in the pictures unless you are using a nice DSLR to let more light in. Rather than making bubble hash with water, I just used the bags to make a dry ice kief from the buds. Unfortunately I couldn’t get a block of dry ice and had to use these cubes…….don’t like these as much because there are too many surfaces beating your green plant material and your kief goes green before long when shaking. Could have done it with out ice all together…..nicer hash but lots left on the plant afterwards that way so yield is low. Used two bags in this extraction, the 220 as the bag for edibles and the 120 as the bag for pressing rosin to smoke…..dry ice hash rosin!! The yield on this from the 74g of bud was 22.4g kief. 220 bag was 12.6g and the 120 bag was 9.8g. Not great I guess but I didn’t want to keep going for 4 and 5 minutes with the bags…..these were roughly 2 minutes with the 220 being 3 minutes on the high side. You can certainly see that the 120 product is more golden in colour than the 220 but since I didn’t crazy, the 220 is still a very nice colour. Last step on this journey was then to take the kief and make our rosin. I pressed product using 37um bags with the temp set at 160 degrees. All were done the same for the most part……roughly 4 gram presses, the same temperature, and the time. The first presses were 90 to 120 seconds. If a second press was done on the pouch, then it was at the same temp but for only 40 to 50 seconds. The yield on this was just shy of 7 grams…….6.77g…..roughly 30% yield from Kief???,…..roughly 9.2% from flower???…….would have likely done better right from flower😂 😂 😂 it was fun, regardless of the yield😃 Tasty rosin!!!! Can’t beat rosin for getting the true tastes of the plants. These numbers are absolutely due to my abilities with extraction.......sure don’t judge the genetics based on my returns......she is a frosty plant and will give great returns!!!👍👍 Several pictures show that, I hope!! So that will wrap up this diary for Sweet Seeds Killer Kush Auto, SWS56. Certainly give this girl some consideration if you like OG Kush and also have space concerns in your grow. She is beautiful frosty little girl with a punch. Certainly get the usual woody and citrus notes from her rosin and she has a lasting high. She helps to get get you going and willing to finally start cleaning that corner of the room you have been avoiding…….watch out though…..distractions😃……next thing you know 40 minutes go by and you are staring at a box of DVD’s wondering what happened to CD’s…….cassette tapes (the art of the “mix tape”), 8 tracks, vinyl……ALBUM COVER ART Baby!!!!!! Then its either back for another rip, or get your crap done because the next rip leads into even less work getting done😃😃 Great job as usual @Sweet_Seeds !!! Looking forward to the next one……Cream 47 photoperiod……actually, already done germination and a new diary coming👍👍…..compare a 3 gal pot to a 5 gal pot, or a fabric vs air pot, and see what my yield differences are?? Thanks for the read and greatly appreciate the comments Growmies!!!!! Love spending time on a forum for growers to help fellow growers. Much grower love and thanks again for your time, opinions, and suggestions🙏🙏🙏 Cheers!!

beginning of week 5 of lowering

It was time for harvest. the video was taken outside - a little bit of real sunshine before the chop. With out a microscope it was particularly difficult working out the colours of the trichomes. So I guessed.

OOOOOH at this time i love all of you, growmie 😍 200gr of pure happiness, never before! 🙌 Buds are compact like rock, shine like diamond...it's unbelivable, looks perfect! At last, mold take me about 20g of buds 😩 But it is ok, the jar is overfull and i'm so happy XD Now let's wait for the right taste......for now is greatful! 😜 Thanks to Dutch Passion for this opportunity, i'm really proud!! 🙏 Thanks to all of you growmie, for your support 🙏 to the next adventure!

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Clones are ready to become monsters, roots are exploring the fabric pots, while tops are growing vertically and creating new nodes everyday. I think it's almost time to trigger the flip, I'm limited with heights and these babies will probably stretch a bit. One more veg week and we'll jump into the flowering stage!

What up Fam, weekly update on these lovely ladies, going into week 9. They've handled this heat wave we're having like the Champs they are, not even skipping a beat Growing. The tent is definitely smelling mesmerizing and the flowers are looking spot on. All in all Happy Growing

Neue Woche weiter geht es heute am 21.09 habe ich umgetopft in den finalen 11L Topf. 22.09 3 pflanzen wurden heute getoppt und die Zillions wird wahrscheinlich in 3 tagen getoppt.

Hey hey my fellow growers, I hope everyone had an excellent week! It is great to be back here at the beginning of week six, let’s get into it! Last week I had misspoke- I said I was going to train 5 of the 6 plants I have going from fastbuds, this was false…. What I meant is all 6… Yes at the time I had only INTENDED on messing with 5 but the last one, the way it was structured with the self top, it was practically BEGGING me to get in there and play with it- and I ask you this- who would I be to deny that little strawberry pie the simple pleasure of a little training? So train I did… Nothing crazy, but actually for all six plants (despite my best efforts, best being debatable) to not go overboard- I have been going in a doing a little bit of training and taking a leaf off here and there if it’s blocking any potential bud sites. I am trying to be really careful and not do too much at once and upset any of them- but at the same time, after stunting them a bit with the taproot incident (which I will keep referring to until I learn from that mistake) I want to do what I can to maximize yield after tripping up a bit in the beginning. We will see how it goes, but for now, everything seems to be doing well and responding well to the bit of training I have been doing. Right now I am seeing a range of sizes among the bunch- the forbidden runtz are both shorter and squatier coming in at about 5.5 inches in height each and I notice everything is spaced a bit tighter on these so I have had some difficulty spreading them out but not to any problematic extent, just in comparison with the rest- Next we have the strawberry pie- the smaller one coming in at 5.5inches, is the one that I was speaking about that had topped itself. It seems to be doing well and handling the training just fine. However the other one, that one is much bigger and is about 8.5 inches tall. It wasn’t until I busted out the ruler that I saw that this was the second biggest plant of the fast buds. That leaves the largest which of course was the gorilla cookies! The smaller of the two is coming in at 8 inches and the larger one coming in at 9.5! They are both tied down and doing great, showing growth each day after being trained and having select leaves removed. We are getting closer and closer to flower I hope to have a bit more time with them but that is totally in their hands, so we will see what happens- the game plan now for me at this point is to keep doing what I’ve been doing- trying to balance on a delicate line. As far as other news… I am doing dishes the other day- I have my phone propped up with YouTube on and dude grows playing (my preferred way to do dishes) I hear the dude mention a giveaway they are doing that I had submitted an entry for recently so my ears had perked up…👀 I saw they had the contest page pulled up and on display and I thought to myself, wouldn’t it be cool if I got to see my picture right now, sure enough- I hear them start talking about my pictures! I in no way won (at this point, my fingers are crossed though haha) and I realize that this is debatably anticlimactic however, I listen to these guys everyday at work so I was stoked! I still am! There are lots of good giveaways going on right now, all the amazing contests going on on this site, Instagram wherever! You have to be in it to win it folks and often it doesn’t take much to enter- I wish you all luck if you participate in any holiday contests and I hope you all have a fantastic holiday week and I will catch you all here at the same time in the same place hopefully with some new goodies and we can continue this fastbuds journey! Growers love and happy holidays everybody!!! 💚🤙🌱

Believe or not, this baby just started flowering, I think my decision to defoliate will bare results, like how lamb’s breath turns out. She’s the last to flower but she’s one of the first plants I planted, it took longer than I expected to start flowering,

Had alot of fun with these realized my dumbass could only use my plant for two plants but everything is a learning process i really wanna lrean how to get fat ass nuggs any help is welcome

Yo! Week 3 is rolling along, and things are looking pretty sweet! The plant is vibing well with the Canna Terra nutrients. I’ve been sticking to that medium dosage, and honestly, you can see the difference in just three days—those leaves are popping! I've also kicked off some low-stress training this week. Just gently bending and tying things down to give it a nice shape. Can't wait to see how it all turns out! Excited for what’s next on this green journey! 🌱✌️

Germination was very simple, paper towel for 40 hours. I always use a few sprinkles of Mycorrhizal Inoculant to boost the first stage of the growth when they are moved to the cups.Every 6 hours i check for water and humidity.