My o my, what can I say... These ladies are gorgeous! Along with adding in the 2000W along side my 600W, I cut out the grow solution in my nutes contrary to the instructions and my ladies are booming! We'll see how the rest of the week continues! I started a majority bloom with some added glucose for my feed to help with bud weight but they are really packing on. Hopefully next week will be my last week of feeding as trichrome production increases and I can start my 2 week flush!

Buds look ready although going to give an extra week as I prefer more amber, very solid and smell is incredible

last week vega, cut the lower steams into clones, do defloration and go to bloom)

As u can see not all reached the surface so ill be replacing these with Diesel from Soma and Dos Si dos from Zamnesia.

So this is the last week before harvest, the trichomes are gettin milky and this time i will cut a little bit earlier. It is rainy and humid outside, it's good to finish now. Gave her Flash Clean for 3 days now, flushing. in 3 days the reservoir will be empty and the last 3 days she wont get any water . Set the PPFD to 600 to save the terpenes. After some start problems she turned out better, my first time in Autopots and pure coco. A lot of buds, i think 180 Dry. The top are already smokeable, i did a partial harvest. Smoke Report will follow Thanks to Terra Aquatica for the fertilizers and FastBuds for the seeds!

.

The smell is super delicious! Its really has those diesel lemon sweet&sour plus garlic like strong terps. Wow! Im starting to flush now.

Tag 33 - 03.01.2025 Die Orange President zeigt leider einige Mängel. Ich vermute, dass es sich um ein Problem mit Cal/Mag (Calcium und Magnesium) handelt, eventuell auch um einen Stickstoffmangel. Seit kurzem wird der pH-Wert des Wassers angepasst, und bei jedem Gießgang gebe ich Plant BoOoM SiCaMag hinzu. Vielleicht hat jemand von euch Profis noch eine Idee, was die Ursache sein könnte und wie ich am besten vorgehen sollte. Ich freue mich über eure Tipps! 😊

Getting there... cant wait for Spring Walls are up and painted, floor is laid, electrical all done, exhaust outlets mounted. Ive started to install the trim - I decided to put a grey stain instead of boring paint on the floor trim boards. Looks really solid against the dark bamboo floors. I used two gallons and two coats of flat pure white paint for walls and ceiling. Should give me a reflectivity somewhere around 80%. Some may ask why not opt for mylar? I just dont like the look. I dont care too much for reflectivity, as I will be well above the required watts/sqft with the light setup I will be using. I mounted an electrical receptacle in the ceiling, I thought it may come in handy for cord management. Im going to mount the 3 x meanwell drivers outside of the grow room and run some extra long cables to them. This is to keep heat out of the room, any little bit helps. Will be running a 8inch fan with about 750 CFM in order to properly vent the room. Intake will be a door vent and the negative pressure the fan provides. Odor is not too much of a concern, but may as well add a carbon filter. Tables to be built this week after trim is installed Week 1 Spend - $2080 Week 2 Spend - $350 (mostly on hardware store visits) Total so far - $2430

FBA2505 is in the mist of bulking. She has about 2 weeks left. She has some nice purple colas on her. She has a piney, sweet, citrus smell. This plant has been through hell. From root rot to a bad ph pen was my latest discovery. She is turning out good for the issues I had. Thank you Fast Buds, Medic Grow, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

The stretch is definitely in effect! The pistols are pistoling and the bud sites are popping up and flourishing with the help of a bit of lst, All signs are looking good to a successful grow / yield hopefully, Not drinking as much as I thought she would but I’m sure that’ll come, Root ball size is starting to fill out the fabric pot, Week by week now 🤤😴🤤

Such a beautiful week with the girls. I moved them in a larger tent(120x120x200), they deserve it :) The buds are taking nice shape, it felt like it took for ages since I flipped them. The Criticals were more vigorous, but now the GZs seem to be catching up :D They turned a bit dark green, so I will go back to 750ppm. Next week I will focus the time-lapse on the GZs, as I feel they are more trendy.

🗓️ Week 17: 3/23 - 3/29 📆 Week 7 of 12/12 🌄 The plant is starting to go into senescence and presenting some beautiful colors as she begins to fade. 💡 Received new lighting courtesy of Growers Choice. They sent me the ROI-E420 with the Master Controller. First impression is amazing. Looks and feels like very high quality build. The spectrum seems more blue than the 3000k lm301H Kingbrite bars I have been using. The bars are thinner and packed with a lot of diodes, so they do run a little hotter than the KB at full power. I adjusted and now running them at 90%. For now the Kingbrite bars are being used as side lighting dimmed to about 30-35% depending on Grow room temps.

Inizialmente non volevo mettere la rete, e forse era meglio che non la mettevo, perché per metterla mi sono fatto prendere dal panico e ho spezzato molte apicali dato che ancora erano appena formate e molto deboli. Qualcosa du brutto doveva pur sempre a, ma va bene lo stesso fa parte dell'esperienza.

Just trying to keep her happy at this point.

Eccoci alla fine!!! Pianta dall’odore spaziale nel pulirla mi ha sballato! Super compatta e molto molto resinosa 💚 Sicuramente verrà riprovata in vaso più grande in quanto ha davvero un potenziale immenso, gradita veramente molto! Grazie a tutti per il supporto ❤️🔥🌲 E grazie a @Exotic_Seed per la collaborazione ❤️