5/13/22 - 5/20/22 5/14/22 Today my Poison Zkittlez got her Zamaldaberry room mate to move out so that she would have more space. She is trying to fill this 4x4. I did some defoliation and leaf tucking today to help open up those inner branches. 5/16/22 Today my girl got some defoliation and her resivore topped off at 3 gallons needed after 3 days. She is doing great and her flowers are getting beautiful 😍 5/20/22 Today marks the last day of week 3 of flower for my Poison Zkittlez. Topped off her resivore 3 gal. Did some minor defoliation of some inner leaves.

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

They completed last week of Veg and they are looking happy. Decreasing Humidity gradually to increase VPD(1.4~). This week, I have also added a trellis net to scrog them a bit. It’s maybe too early to say but they seem to like the worm humus so far. Humidity is fluctuating between 56-60%. Temp is 22-26 Celsius. VPD is relatively constant around 1.30 except for very rainy days. I am switching to 12:12 tomorrow. Note: Changed spots of Blueberry Muffin and Dripz

Buena variedad y pega fuerte se siente como si te derritieses es una sensación muy buena 😎pero me gusto mucho cultivarla este cultivo esta a base de pura agua con nada de PK ni NPK. OG Kush Auto excelente trabajo

Runtz from Zamnesia has been a strong grower along the way. When it was in veg it started with a little slow growth but this plant has a lot of euro genetics in it and it seems it would have loved higher light intensity durring veg so it would have stacked better. The buds are an interesting structure that’s why I think the plant was meant to be stacked the nugs army nice round balls there weird shaped like they were meant to be closer together to make long colas. There is potential with this plant just would need some more grows to dial it in to be grown at its pote

I MADE TOPPING AT THE BEGINNING OF THE 3RD WEEK

Día 41 (03/06) Riego 750 ml sólo H2O pH 6.2 Día 42 (04/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Día 43 (05/06) Riego 750 ml sólo H2O pH 6.2 ANDF se ha convertido en una bestia de 1 metro de altura (96 cm)! 😍 Día 44 (06/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l +TopBooster 0,2 ml/l - pH 6.2 Día 45 (07/06) Riego 750 ml sólo H2O pH 6.2 Día 46 (08/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Día 47 (09/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 ANDF parece que ha detenido el strecht en 98 cm. Impresionante 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

looking good. up potted and rocking. waiting till I get my first clones so I can flower these girls.

Start of week 7 (day 42 of flower) 9/13/25 Fed with nutrients: 9/17/25

👉Alrighty Then👈 This plant finished out just around 90 days from seed 👉Puffed a bunch of it , and its good 👍 nice terp profile👌 However she was super leafy...... which sucked , and a small producer ..... Lucky she had bite , which is why I bumped her numbers up 😳 6 out of 10 I may give this one a try way down the road , just to see if it was a bad pheno .... Can't say at this time if I would recommend, but she's worth a try from those terps alone ..... Persian Pie from Greenhouseseeds Full Gas from Greenhouseseeds Babba Kush from Greenhouseseeds Rainbow Melon from Fastbuds Papaya Sherbet from Fastbuds Weddingcheesecake FF From Fastbuds Purple Oreoz F1 From Seedsman Slurricane From Premium Cultivars Soil by Promix Nutrients by Cronks This was a crap ton fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈

New week for Anesia Hyper glue Anesia Hyper glue is doing great topping is done and doing some last LST on them preparing them for flowering soon cannot wait 19/10/2 made 360 video today enjoy🤣 20/10/21 Thinking of switching to flowering soon don't want them to grow to big in 8L pots 21/10/21 Decided to order some 11L pots to transfer them in so before flowering i probably transfer them so roots can grow some more also gone try Mycorrhiza Mix with transfer More photos Tru the week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.

Week 13 9th week of flower. Light settings 12/12 on at 9.00am off 9.00pm Light power= 100% 240w Radiator settings LIghts on Turn on if temp drops below 21.5c Turn off if temp goes above 21.5c Lights off Turn on if temp drops below 18.0c Turn off if temp goes above 18.0c Extractor settings temperature 23c with 1c steps Humidity 35% with 2% steps Max speed 10 Min speed 4 VPD aim 1.0-1.4 DLI aim 35-40 Wednesday 19/4/23 Day 85 (Day 57 flower) Massive defoliation. Thursday 20/4/23 Day 86 (Day 58 flower) Nothing Friday 21/4/23 Day 87 (Day 59 flower) Flawless 2ml/L Ec=0.4 Ph=7.1/7.1 5 drop Ph D Ph 6.3/6.0 Autofeed 8 runs (2,3,5,10,15,15,15,15 total 80 mins) Flawless Ec=0.4 Ph=6.3/6.0 2L left Roughly 2L each. #1 0.1L runoff Autofeed 8 runs (2,3,5,10,15,15,15,15 total 80 mins) Water Ec=0.2 Ph=6.3/6.0 2L left Roughly 2L each. #1 0.1L runoff Saturday 22/4/23 Day 88 (Day 60 flower) Sunday 23/4/23 Day 89 (Day 61 flower) Cut scrog net and moved plants about. Monday 24/4/23 Day 90 (Day 62 flower) Raised plant #1 Tuesday 25/4/23 Day 91 (Day 63 flower) Manual water 2.0L This is the last weekly update for the grow as they are all being chopped sometime next week. The next update will be the harvest update in a few weeks time once its dried and had a 2 weeks cure. #1 Wedding Cheesecake FF is ready for the chop. She is very sticky, trichomes are just about where I want them to be. She is smelling absolutely gorgeous. Power used for week Light (2.69+2.68+2.68+2.68+2.69+2.69+2.68)=18.79Kw Extractor (0.58+0.58+0.58+0.58+0.58+0.58+0.58)=4.06Kw Fans (0.92+0.95+0.97+0.94+0.90+0.93+0.92)=6.53Kw Dehumidifier (++++++)=Kw Radiator (1.39+1.45+1.38+1.45+0+0+0)=5.67Kw Water pump. (0+0+0.03+0+0+0+0)=0.03Kw Total for the week=Kw Back in a few weeks with harvest and smoke review. Thanks for stopping by.

On day 1 the reservoirs PH is 6.3. The rez is 483 ppm. The girls are looking good and nitrogen toxicity seems to have stopped. On day 2 the reservoirs PH was adjusted from 6.1 to 6.3. The rez is 477 ppm. Trichomes seem to be 10% cloudy so I still have a bit to go i'm thinking 9 weeks should be a good bet! On day 3 the reservoirs PH was adjusted from 6.4 to 6.1. The rez is 500 ppm. On day 4 the reservoirs PH is 6.2. The rez is 503 ppm. I lowered the ppfd so my tallest received 900 ppfd and an average of 543 ppfd. On day 5 the reservoirs PH is 6.2. The rez is 519 ppm. I removed some of the extra fan leaves blocking bud sites. On day 6 I changed out the reservoir with only tap water and adjusted the PH from 6.7 to 6.1 with a ppm of 249. The trichomes are maturing and I plan on harvesting on week 8 day 4 of flower. On day 7 the reservoirs PH was adjusted from 6.5 to 6.0. The rez ppm is 250.

After weeks of limp stem and no roots she has finally shown great progress. Fans leaves are expanding and her stem in hella strong

Just started this one off... Not much to say so far. This is a coco grow. I started off with an amended Coco using Gaia Green 4-4-4 and power bloom 2-8-4.

Pousse extrêmement vite