Dropped hours to 17 to get closer to the 15 we will have outside in a few weeks. A week of battles for this tent. Lotta pest activity. Bulb mites and Nematodes (never going to have regular perennial flowers and dahlia bulbs in the tent again), lessons learned. Active pest strategies tried: - listerine / water soak - Neem oil / water soak - Dr. Bronner soap / water soak - worm castings to boost balanced microbial life - insect Frass to provide chitin - diatomaceous earth top dress - mosquito Dunks prior to organic amendments to deal with any eggs/larvae in soil

Started 12/12 light cycle. Normal week. watering up to 1.5 L a day. co2 PPM @ 1250. Defoliated due to massive growth and to bring light to the tops.

Defoliated,.. tips of the big plant going purple and into the leaves, defo going to be a colourful one, little one staying green I think,.. look OK, maybe a little something going on with a little discolouration in some leaves but I think they look healthy,.. start of week 7 let'sss goooo 🤞👌👍

Planta hermosa, de estructura resistente y cogollos rocosos y repletos de resina. Resistente bien el entrenamiento LST y topping, pide bastante alimentos y te recomiendo lavar bien las raíces antes de cosechar si has usado fertilizantes. Los frutos desprenden una fragancia exquisita y muy dulce.

Day 42 doing good still tips burn not much only little and bottom leaves turning yellow and dropping off but she has enough leaves , think she’s gonna be ready about day 65 , I reckon she has been a quick grower , still drinking 2litres , buds arnt biggest propaly because of only using 100w ts, should of used my 300w , smells beautiful and some dence nugs are forming , I normally use big bud as a booster but trying out bio buzz.

Last Thursday was the start of the fourth week. I didn't update earlier because I was away on vacation. I asked a trusted friend to take care of the girl. As you can see, in the fourth week of the girl's life, it started to bloom. I continue without giving any nutrients. I have biobloom and top max from biobizz at home. Do you think I should use nutrients or should I let it go until the end without nutrients?

Week 2 flowering day 3 🚀🚀

Yellow butterfly came to see me the other day; that was nice. Starting to show signs of stress on the odd leaf, localized isolated blips, blemishes, who said growing up was going to be easy! Smaller leaves have less surface area for stomata to occupy, so the stomata are packed more densely to maintain adequate gas exchange. Smaller leaves might have higher stomatal density to compensate for their smaller size, potentially maximizing carbon uptake and minimizing water loss. Environmental conditions like light intensity and water availability can influence stomatal density, and these factors can affect leaf size as well. Leaf development involves cell division and expansion, and stomatal differentiation is sensitive to these processes. In essence, the smaller leaf size can lead to a higher stomatal density due to the constraints of available space and the need to optimize gas exchange for photosynthesis and transpiration. In the long term, UV-B radiation can lead to more complex changes in stomatal morphology, including effects on both stomatal density and size, potentially impacting carbon sequestration and water use. In essence, UV-B can be a double-edged sword for stomata: It can induce stomatal closure and potentially reduce stomatal size, but it may also trigger an increase in stomatal density as a compensatory mechanism. It is generally more efficient for gas exchange to have smaller leaves with a higher stomatal density, rather than large leaves with lower stomatal density. This is because smaller stomata can facilitate faster gas exchange due to shorter diffusion pathways, even though they may have the same total pore area as fewer, larger stomata. Leaf size tends to decrease in colder climates to reduce heat loss, while larger leaves are more common in warmer, humid environments. Plants in arid regions often develop smaller leaves with a thicker cuticle and/or hairs to minimize water loss through transpiration. Conversely, plants in wet environments may have larger leaves and drip tips to facilitate water runoff. Leaf size and shape can vary based on light availability. For example, leaves in shaded areas may be larger and thinner to maximize light absorption. Leaf mass per area (LMA) can be higher in stressful environments with limited nutrients, indicating a greater investment in structural components for protection and critical resource conservation. Wind speed, humidity, and soil conditions can also influence leaf morphology, leading to variations in leaf shape, size, and surface characteristics. Small leaves: Reduce water loss in arid or cold climates. Environmental conditions significantly affect gene expression in plants. Plants are sessile organisms, meaning they cannot move to escape unfavorable conditions, so they rely on gene expression to adapt to their surroundings. Environmental factors like light, temperature, water, and nutrient availability can trigger changes in gene expression, allowing plants to respond to and survive in diverse environments. Depending on the environment a young seedling encounters, the developmental program following seed germination could be skotomorphogenesis in the dark or photomorphogenesis in the light. Light signals are interpreted by a repertoire of photoreceptors followed by sophisticated gene expression networks, eventually resulting in developmental changes. The expression and functions of photoreceptors and key signaling molecules are highly coordinated and regulated at multiple levels of the central dogma in molecular biology. Light activates gene expression through the actions of positive transcriptional regulators and the relaxation of chromatin by histone acetylation. Small regulatory RNAs help attenuate the expression of light-responsive genes. Alternative splicing, protein phosphorylation/dephosphorylation, the formation of diverse transcriptional complexes, and selective protein degradation all contribute to proteome diversity and change the functions of individual proteins. Photomorphogenesis, the light-driven developmental changes in plants, significantly impacts gene expression. It involves a cascade of events where light signals, perceived by photoreceptors, trigger changes in gene expression patterns, ultimately leading to the development of a plant in response to its light environment. Genes are expressed, not dictated! While having the potential to encode proteins, genes are not automatically and constantly active. Instead, their expression (the process of turning them into proteins) is carefully regulated by the cell, responding to internal and external signals. This means that genes can be "turned on" or "turned off," and the level of expression can be adjusted, depending on the cell's needs and the surrounding environment. In plants, genes are not simply "on" or "off" but rather their expression is carefully regulated based on various factors, including the cell type, developmental stage, and environmental conditions. This means that while all cells in a plant contain the same genetic information (the same genes), different cells will express different subsets of those genes at different times. This regulation is crucial for the proper functioning and development of the plant. When a green plant is exposed to red light, much of the red light is absorbed, but some is also reflected back. The reflected red light, along with any blue light reflected from other parts of the plant, can be perceived by our eyes as purple. Carotenoids absorb light in blue-green region of the visible spectrum, complementing chlorophyll's absorption in the red region. They safeguard the photosynthetic machinery from excessive light by activating singlet oxygen, an oxidant formed during photosynthesis. Carotenoids also quench triplet chlorophyll, which can negatively affect photosynthesis, and scavenge reactive oxygen species (ROS) that can damage cellular proteins. Additionally, carotenoid derivatives signal plant development and responses to environmental cues. They serve as precursors for the biosynthesis of phytohormones such as abscisic acid () and strigolactones (SLs). These pigments are responsible for the orange, red, and yellow hues of fruits and vegetables, while acting as free scavengers to protect plants during photosynthesis. Singlet oxygen (¹O₂) is an electronically excited state of molecular oxygen (O₂). Singlet oxygen is produced as a byproduct during photosynthesis, primarily within the photosystem II (PSII) reaction center and light-harvesting antenna complex. This occurs when excess energy from excited chlorophyll molecules is transferred to molecular oxygen. While singlet oxygen can cause oxidative damage, plants have mechanisms to manage its production and mitigate its harmful effects. Singlet oxygen (¹O₂) is considered a reactive oxygen species (ROS). It's a form of oxygen with higher energy and reactivity compared to the more common triplet oxygen found in its ground state. Singlet oxygen is generated both in biological systems, such as during photosynthesis in plants, and in cellular processes, and through chemical and photochemical reactions. While singlet oxygen is a ROS, it's important to note that it differs from other ROS like superoxide (O₂⁻), hydrogen peroxide (H₂O₂), and hydroxyl radicals (OH) in its formation, reactivity, and specific biological roles. Non-photochemical quenching (NPQ) protects plants from damage caused by reactive oxygen species (ROS) by dissipating excess light energy as heat. This process reduces the overexcitation of photosynthetic pigments, which can lead to the production of ROS, thus mitigating the potential for photodamage. Zeaxanthin, a carotenoid pigment, plays a crucial role in photoprotection in plants by both enhancing non-photochemical quenching (NPQ) and scavenging reactive oxygen species (ROS). In high-light conditions, zeaxanthin is synthesized from violaxanthin through the xanthophyll cycle, and this zeaxanthin then facilitates heat dissipation of excess light energy (NPQ) and quenches harmful ROS. The Issue of Singlet Oxygen!! ROS Formation: Blue light, with its higher energy photons, can promote the formation of reactive oxygen species (ROS), including singlet oxygen, within the plant. Potential Damage: High levels of ROS can damage cellular components, including proteins, lipids, and DNA, potentially impacting plant health and productivity. Balancing Act: A balanced spectrum of light, including both blue and red light, is crucial for mitigating the harmful effects of excessive blue light and promoting optimal plant growth and stress tolerance. The Importance of Red Light: Red light (especially far-red) can help to mitigate the negative effects of excessive blue light by: Balancing the Photoreceptor Response: Red light can influence the activity of photoreceptors like phytochrome, which are involved in regulating plant responses to different light wavelengths. Enhancing Antioxidant Production: Red and blue light can stimulate the production of antioxidants, which help to neutralize ROS and protect the plant from oxidative damage. Optimizing Photosynthesis: Red light is efficiently used in photosynthesis, and its combination with blue light can lead to increased photosynthetic efficiency and biomass production. In controlled environments like greenhouses and vertical farms, optimizing the ratio of blue and red light is a key strategy for promoting healthy plant growth and yield. Understanding the interplay between blue light signaling, ROS production, and antioxidant defense mechanisms can inform breeding programs and biotechnological interventions aimed at improving plant stress resistance. In summary, while blue light is essential for plant development and photosynthesis, it's crucial to balance it with other light wavelengths, particularly red light, to prevent excessive ROS formation and promote overall plant health. Oxidative damage in plants occurs when there's an imbalance between the production of reactive oxygen species (ROS) and the plant's ability to neutralize them, leading to cellular damage. This imbalance, known as oxidative stress, can result from various environmental stressors, affecting plant growth, development, and overall productivity. Causes of Oxidative Damage: Abiotic stresses: These include extreme temperatures (heat and cold), drought, salinity, heavy metal toxicity, and excessive light. Biotic stresses: Pathogen attacks and insect infestations can also trigger oxidative stress. Metabolic processes: Normal cellular activities, particularly in chloroplasts, mitochondria, and peroxisomes, can generate ROS as byproducts. Certain chlorophyll biosynthesis intermediates can produce singlet oxygen (1O2), a potent ROS, leading to oxidative damage. ROS can damage lipids (lipid peroxidation), proteins, carbohydrates, and nucleic acids (DNA). Oxidative stress can compromise the integrity of cell membranes, affecting their function and permeability. Oxidative damage can interfere with essential cellular functions, including photosynthesis, respiration, and signal transduction. In severe cases, oxidative stress can trigger programmed cell death (apoptosis). Oxidative damage can lead to stunted growth, reduced biomass, and lower crop yields. Plants have evolved intricate antioxidant defense systems to counteract oxidative stress. These include: Enzymes like superoxide dismutase (SOD), catalase (CAT), and various peroxidases scavenge ROS and neutralize their damaging effects. Antioxidant molecules like glutathione, ascorbic acid (vitamin C), C60 fullerene, and carotenoids directly neutralize ROS. Developing plant varieties with gene expression focused on enhanced antioxidant capacity and stress tolerance is crucial. Optimizing irrigation, fertilization, and other management practices can help minimize stress and oxidative damage. Applying antioxidant compounds or elicitors can help plants cope with oxidative stress. Introducing genes for enhanced antioxidant enzymes or stress-related proteins over generations. Phytohormones, also known as plant hormones, are a group of naturally occurring organic compounds that regulate plant growth, development, and various physiological processes. The five major classes of phytohormones are: auxins, gibberellins, cytokinins, ethylene, and abscisic acid. In addition to these, other phytohormones like brassinosteroids, jasmonates, and salicylates also play significant roles. Here's a breakdown of the key phytohormones: Auxins: Primarily involved in cell elongation, root initiation, and apical dominance. Gibberellins: Promote stem elongation, seed germination, and flowering. Cytokinins: Stimulate cell division and differentiation, and delay leaf senescence. Ethylene: Regulates fruit ripening, leaf abscission, and senescence. Abscisic acid (ABA): Plays a role in seed dormancy, stomatal closure, and stress responses. Brassinosteroids: Involved in cell elongation, division, and stress responses. Jasmonates: Regulate plant defense against pathogens and herbivores, as well as other processes. Salicylic acid: Plays a role in plant defense against pathogens. 1. Red and Far-Red Light (Phytochromes): Red light: Primarily activates the phytochrome system, converting it to its active form (Pfr), which promotes processes like stem elongation and flowering. Far-red light: Inhibits the phytochrome system by converting the active Pfr form back to the inactive Pr form. This can trigger shade avoidance responses and inhibit germination. Phytohormones: Red and far-red light regulate phytohormones like auxin and gibberellins, which are involved in stem elongation and other growth processes. 2. Blue Light (Cryptochromes and Phototropins): Blue light: Activates cryptochromes and phototropins, which are involved in various processes like stomatal opening, seedling de-etiolation, and phototropism (growth towards light). Phytohormones: Blue light affects auxin levels, influencing stem growth, and also impacts other phytohormones involved in these processes. Example: Blue light can promote vegetative growth and can interact with red light to promote flowering. 3. UV-B Light (UV-B Receptors): UV-B light: Perceived by UVR8 receptors, it can affect plant growth and development and has roles in stress responses, like UV protection. Phytohormones: UV-B light can influence phytohormones involved in stress responses, potentially affecting growth and development. 4. Other Colors: Green light: Plants are generally less sensitive to green light, as chlorophyll reflects it. Other wavelengths: While less studied, other wavelengths can also influence plant growth and development through interactions with different photoreceptors and phytohormones. Key Points: Cross-Signaling: Plants often experience a mix of light wavelengths, leading to complex interactions between different photoreceptors and phytohormones. Species Variability: The precise effects of light color on phytohormones can vary between different plant species. Hormonal Interactions: Phytohormones don't act in isolation; their interactions and interplay with other phytohormones and environmental signals are critical for plant responses. The spectral ratio of light (the composition of different colors of light) significantly influences a plant's hormonal balance. Different wavelengths of light are perceived by specific photoreceptors in plants, which in turn regulate the production and activity of various plant hormones (phytohormones). These hormones then control a wide range of developmental processes.

Really happy with this week good growth the gorilla cookie's is a week older then the mystery auto

Grow Diary – Day 79 (Flowering Day 59) Strain: Sour Frootz by Karma Genetics Plants: 4 clones Training: HST + SCROG Nutrients: Flushing – pH-adjusted water only Lighting: LED at 50% intensity Date: May 30 Status: Final flush in progress – harvest slightly delayed Today marks Flowering Day 59, and the Sour Frootz are now well into the ripening phase. For the past three days, only pH-adjusted water has been given, initiating the flush phase. At this point, the nutrients in the soil are nearly depleted, and the plants are naturally drawing on internal reserves—visible through gradual leaf yellowing and fade. The plants are approaching ideal harvest maturity. The delay in harvest by a few days allows more amber to develop and maximizes terpene maturity without compromising overall quality. Lighting Conditions: • The LED is currently running at 50% power to gently finish the ripening process while minimizing light stress and preserving essential oils during these final days. Plant Observations: • Buds are hard, resinous, and aromatic • Strong sour/citrus funk intensifies with every day • Natural senescence is occurring – older fan leaves fading evenly • No nutrient deficiencies or toxicity present • Humidity stable around 50%, airflow is optimal • No signs of mold or late-stage issues Outlook: Harvest is likely to occur within the next 3–5 days, depending on final trichome checks and desired effect. You’re in the home stretch now, with flavor and resin peaking. Continuing to monitor closely for optimal harvest timing is key from here.

Week 7 veg! In today's video we top all the plants except 2, and put up some LST on some of them. The last time I fed them was when they received their transplant. Unfortunately one of the plants did not make it, it was the one with the severely burnt fan leaves. Hope everyone's doing well. Cheers!-G.I.JOSE

Week 4 of flower 👍🏾

New start of a week FLOWERING From 120cm to 55 cm i gots it all 🤣 It's my 3rd full grow and can definitely see the extra nutrients doing there job they are at beginning of week 3 and the hedgehog 🦔🦔🦔🦔 are exploding and the pineapple dream edition and the banana punch are already giving a light aroma I definitely got more of the lower Bud side gone there still some there but hey i say in every diaries i am here to learn to fuck up and to understand and only get better in understanding all aspects of the growing this beautiful plant . And what like and what i don't like . More photos Tru the week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Doesn't everyone like American Pie

Week 7 Flower We've finally started flush 💦 on Day 43. I still run EM1 at 1ml/ltr as it goes a long way once activated/stretched. It's always going to be a benefit to keep any microbes you can in the coco. You can also use Mammoth P throughout flush, but due to its price I just stick to EM1 in flush. There's plenty of other microbes that can be used too. I flush around twice the pots' volume at 6pH. But before flooding the pot I slowly pour water through the centre of the pot, around the stem, in order to take a true reading of the ppm and pH of the run off. If the ppm/ec reads a lot higher than your average feeding throughout bloom, then there's been issues such as a lockout, incorrect pH, over feeding etc. This wasn't the case, as this girls' was at the right level. If the pH is too high or low, I adjust the pH of the rest of the water that'll be flushed to try to fix it. Again, this wasn't the case with this girl as she had a perfect pH 👌👍 Just before all of the water has gone through the pot, I take one last reading from her last bit of run off. The ppm should be down to no more than 100ppm for the first flush (+starting ppm of water if using tap water). After the first flush the ppm value of the run off will quickly go all the way down to 0, or at least below 50ppm (+tap water ppm). I use tap water that is between 150-190ppm, but I'm looking to switch to RO as soon as I can. I still get a very good flush, but I think using RO water will be the next step in getting a more thorough flush as it won't contain even the small amount of nutrients and metals that tap water contains (along with any harmful chemicals). Always remember to bubble or let the water sit for 24-48hrs before feeding to your plants. That goes for all feedings in every stage of growth if using tap water. Because I keep fairly low temps in the Den she's starting to turn a beautiful dark purple. Her buds are still swelling and smelling like a nice gassy OG, with hints of citrus/tropical fruits. I'm really looking forward to taking this girl down, but after at least another week! Thanks for following and happy growing! 🐺

So impressed with all these amazing colors and terpenes cant wait to smoke! Feeding💪 10/3 Water32L+Rootdrip10ml+Calmag@150ppm Ph6.1 Ebb Repel 9.30/10 Refresh 11.30/14 Average runoff ph6.4 ec2.8 Clone Repel 10.05/10.25/10.50/11.05 Refresh 12.30 10/4 Water34L+Rootdrip10ml+Fultilt50g+ Ec0.8 ph6.2 Ebb Repel 10.15/10.48(3min) Refresh 12.30/14.30 Average runoff ec2.4 ph6.4 Clone Repel 10.30/10.45/11.20/11.50 Refresh 14/14.30/15.30 Average runoff ec3.3 ph6.3 10/5 Water32L+Purpinator60ml+Calmag170- 240ppm ph6.1 ppm240 Ebb Repel 10.2/10.32 Refresh 12/13.30 Average runoff ec2.4 ph6.4 Clone Repel 10.2/10.30/10.50/11.05 Refresh 13/14/14.30 Runoff ec2.6 ph6.4 Keeper 400ml 10/6 Water32L+Rootdrip10ml+Fulltilt36g+calmag ec0.8 ph6.2 Ebb Repel 10.10/11 Refresh 12.30/14 Average runoff ec2.2 ph6.4 Clone Repel 10.10/10.30/11 Refresh 12.30/14.15/15 Average runoff ec2.6 ph6.4 Keeper 300ml 10/7 Water35L+calmag@150ppm+Purpinator80ml 0.3ec ph6.1 Ebb Repel 11.05/11.48(3min) Refresh 13.20/14.50 Average runoff ec2.2 ph6.4 Clone Repel 11.15/11.35/11.53/12.33 Refresh 14.20/15.20 Average runoff ec2.5 ph6.4 10/8 Water35L+Rootdrip+Fulltilt40g ec0.8 ph6.2 Ebb Repel 11.38(3min)/12.20 Refresh 13.30 /15 Average runoff 2.3ec ph6.4 Clone Repel 11.35/11.55/12.10/12.40 Refresh 14/16 Average runoff ec2.4 ph6.3 10/9 Water35L+Rootdrip30ml ppm40 ph6.1 Ebb Repel 9.05(3min)/9.55 Refresh 11.35/13.35 Average runoff2.1ec ph6.3 Clone Repel 9.35/10.10/10.35/11 Refresh 12.35/14.30 Keeper 400ml per [email protected]

Считаю начало цветения. В целом всё ОК. Запах стал гораздо сильнее. 4-ый день цветения. За два дня резко вытянулась и сегодня пришлось очень много гнуть под сетку. В итоге было сломано две серьёзные колы - очень жаль 😢. Немного порезал листья и срезал несколько мелких веток, что сильно не доросли до сетки. Воткнул их в кокос на клонирование, так как выкидывать было жалко. Что-то мне подсказывает, что они все, зараза, прорастут... Хер знает чего с ними потом делать🙈. На некоторых почках, там где активно светит ультрафиолет уже заметен сахар. А ещё вездесущий кот заметен на них😡 Влажность опять адская. Это показатель, что вентиляция не справляется. Ближе к понедельнику ещё порежу нижние листья и те, что закрывают что-нибудь, дабы улучшить воздухообмен и снизить влажность.

Week 2 *****DIVINE SEEDS ***** *****FRACTAL***** Sponsored grow Week 2 Germination April 6. Week 1 water only Week 2 water only This week 14-20 consisted of plain ph 6.6-6.9 water only. I gave a capful in the morning and evening. Transplanted to final 5 gallon air pot using fox farm amended soil. At 2 weeks, they have a good root structure established. Pics on 14, 16,18 &20 Until the plants are big enough to go outside, I will be using my AC Infinity tent and equipment. Once outside, I will be watering with well water and recharge and any additional fertilizers or amendments will be determined at that time. Thank You @DivineSeeds for the opportunity to grow and try what looks like a winner on all profiles. Thanks for the likes and comments, I appreciate all the plant love💚. Have fun & love what you grow 💚 Sending love and light 💫 💫Natrona 💫 FRACTAL Fractal is an especially psychedelic strain that Divine Seeds developed for esoteric and mystical experiences, meditation and creativity. A potent and vivid landrace variety from Southern India was crossed with a sticky leaning Indica (mostly Afghani), then Skunk #1 joined this company. Their progeny underwent multiple selection experiments, until its massive built, resin concentration and hypnotizing powers reached an ultimate level. The result is now known as Fractal – resinous, spicy and productive. Best choice for commercial growing: a compromise between bigger yields and fast ripening! A great source of hashish that has something incense-like to its musky smell. Indoors expect 170 сm height, out of doors plants grow up to 200 сm. Fractal fits for all types of growing environment: grow boxes, hydroponic or aeroponic setups, outdoor plantations, balconies, terraces and green houses. For more weight it is recommended to train Fractal plants to broaden their structure and limit their vertical growth. For that purpose use ScroG or SoG, LST, FIM or topping, supercropping or mainlining – there are no limitations for the strain itself, but certainly low-stress methods are recommended to smaller samples. Fractal has an inherent immunity to molds and insect pests, but since its colas are thick, protect your plants from stale air. Also during rainy weeks your plantation may need to be covered. Ready for outdoor harvesting in October. Big and dense buds the color of olive, hunter green heavily coated with crystals. Whole Fractal buds smell hashy and earthy, while cedar and fruity hints are noticeable on breaking. Measure your portion carefully: the potency is above average! With Fractal you experience an overall stoning that either keeps you put or slows your motion down, also vertigo is possible. However, in moderate dosage the impact is described as a pleasant sensation of well-being and placidity. Perfect for spending a night by a bonfire without talking, therefore is more often enjoyed as a solo smoke. Efficiently relieves muscle spasms and seizures, inflammations, combats insomnia and increases your appetite. Up to 3 hours of altered state of mind can be expected. Best consumed at night time. Pots: 5gallon Air pots Soil Fox Farm Happy Frog Amended with worm castings, dolomite lime and mychorihiza Seeds provided by Divine Seeds Divine Seeds breeding company The link to Fractal Feminized Seeds Fractal - Divine Seeds breeding company The link to Fractal Auto Seeds Auto Fractal - Divine Seeds breeding company ================================= Equipment: AC Infinity CLOUDLAB 844 – Advance Grow Tent 48”x48”x80” CONTROLLER 69 PRO – Grow Tent Controller CLOUDLINE LITE 6 - Inline Fan 6" IONBOARD S44 – LED Grow Light Board 400W CLOUDRAY S6 – Oscillating Circulation Clip Fan Carbon Filter 6” Nutrients: Total Plant Solution TPS1 Canopy Signal