Likes
Comments
Share
@Kardo
Follow
Die Blätter sind lila und die buds sehen sehr gut aus sie macht gar keine Probleme
Likes
21
Share
Giorno 77 Il ciclo è finito e il diario verrà aggiornato tra 40 giorni circa non appena i fiori avranno fatto una bella concia. Coltivarla è stato semplice e ci sono tantissimi fiorellini piccoli e molto duri. E' molto dolce ma non sento terpeni Zkittlez o Gelato. A presto con l'aggiornamento finale 🖐️ 😘❤️
Likes
114
Share
💩Alrighty Then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are back to do it all over again 😁 So what do you say we have some fun 👈 We got some Gorilla Punch 👊 👊 👊 DAY 56 👉 The Frost 🍦 Is Real 👌 with this one 👍 👉 😳 So I've had a few issues what's done is done , but I think we are on track and she's doing good 👌 I've been experimenting with some new nutrients and ive been having a few issues 🤔 but I think I have under control 🤔 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍👉Added an RU45 too the mix 👍 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 Would you like to hang with the growdiary community 👉 https://discord.gg/gr4cHGDpdb 👈
Likes
19
Share
As seeing some deficiency pop up after flush. Also some stress from light. Added dome Cal mag, Alaska fish fertilizer and it started cleaning up. Added another king Brite 240 raised the lights and set them at 45000 lux evenly accross the tent. Everything looks like it's doing better. Defoliated a massive amount on most of the plants which you'll see in week 9. After I did it the 2 smallest plants started taking off. Dropped off c02 till the recovered. Only getting co2 @1100 ppm for 6 hours, 2 hours after they wake up to start. Still around 600ppm when lights go out and then down to 380 during dark.
Likes
6
Share
As we enter week five we notice some of the plants pre flowering. But not all so I decide to stick with veg nutrients until all are showing pre flowers. Half way through the week and the rest of the plants are showing pre flowers. Just in time as the plants that had pre flowered earlier on in the week are showing slight Newt burn on the tips suggesting It is time to change to bloom newts which holds less nitrogen. The magnified picture are of the pre flowers forming ( two little fuzzy hairs). Interesting fact: it takes thousands of those little fuzzy hairs to form just one bud.
Likes
6
Share
@Redweasel
Follow
1/31/26-7am Not much to do this morning except to record data & water. Next week we will begin the real fun stuff. We definitely have two distinct expressions, which is exciting. Cover crop emerging. Plants received their first full watering since transplant. Hand watered the perimeter of each container with a full 1/2 gallon of plain 6.5ph 11ppm plain water, mixed with 1/2 tsp each of Recharge, aloe powder & coconut water powder. Tray2Grow will be activated Sunday morning, & that will begin the cycle of Sunday through Wednesday evening Tray2Grow irrigation, with Wednesday evening & Saturday morning hand watering. Tray2Grow will deactivate Wednesday evening to Sunday morning. Leaf Temp Differential -2°F DLI raised to 25 VPD raised to 0.85 -Expression #1- Height-4" Width-9.5"×8.5" -Expression #2- Height-4.5 Width-7"×6"
Likes
16
Share
@Rangaku
Follow
Frosting up and looking great . Not doing much to her aside from a little defol here and there . Few more weeeks to go
Likes
8
Share
Likes
2
Share
@FijiS
Follow
Week4 D1 So starting this week plants still look strong but rainbow belts is drooping like she is thirsty but her pot is heavy so I am monitoring to see if she is just being dramatic or if she is getting a slight salt build up. Will water in 2 days and check the ph of run off. I am thinking it is slightly acidic. I also see slight tip burn on a couple leaves but they were just fed and it wasn't hot so I am leaning towards the acidic water. Week4 D4 All girls got 1.5G of dechlorinated tap water at 6.7 ph and thats it. Got nats so I've been using yellow sticky tape. They are stacking heavy so end of week 5 I plan on feeding them a final dose. You can see the light tilted to accommodate the different heights. Week4 D3 I said I would water today but I am going to let them go one more day before making a decision. Rainbow Belts roots may need to breathe a bit so before I make a rash decision I will monitor. Otherwise plants are stacking well and are getting hairy and frosty. Sugar leaves are getting more abundant. Week4 D4 Each girl got 1.5G 6.7 ph water dechlorinated and rotated and thats it. They all are growing well hoping we are on track for another feeding at the end of week5. Next watering will be compost tea to revitalize microbes. Week4 D5 The next day after the 6.7ph feeding they responded well so I think my guess of low soil ph for rainbow belts was correct as well as her drying out sooner. In 5 days or so I will water with compost tea. Everything is looking strong- smell is low but my average temp is about 73degrees. I am keeping vpd between 1.3-1.4 and will hold for a few weeks before bumping up to 1.5. Debating if I want to use UV B light- anyone with any experience let me know. Later growers!
Likes
32
Share
🍏🍌 Apples and Bananas – Harvest Update Two beautiful, healthy plants with very dense, chunky buds. I did run into some bud rot, but humidity wasn’t extremely high — it stayed around 60%. Most likely the issue came from insufficient air exchange, combined with how tight and compact the buds were. This has already been fixed with a ventilation upgrade, so the next run will have proper airflow. 🔥 Effects A very pleasant smoke overall. For me, this is a perfect afternoon/early evening strain. You come back from work, take a shower, relax on the couch, roll an Apples and Bananas… and everything just flows. It can easily pull you into a long gaming session — it takes you along for the ride. 😋 Flavour & Aroma I didn’t get a strong aroma from these phenos. Flavor-wise, one pheno gives some sweet touches, while the other has a slightly green/unripe note. Still, I can definitely imagine what this strain can become if you hit the right phenotype — there’s something promising underneath. With one month of curing, I’m sure the taste will be cleaner and more defined, so I’ll update again then. 🎁 Extra Note These seeds were a gift from Kannabia with my order — thank you very much!
Likes
15
Share
This plant has been a joy to grow, she’s super frosty and fairly dense. I’ve trimmed and put in jars to cure. Not tried yet will give another week in jar then try a wake and bake with it.
Likes
15
Share
End of Week 7 – The Ripening Phase Begins! ❄️🚀 We are slowly cruising down the home stretch! Reaching the end of Week 7, the tent is looking absolute top-tier—the buds are packing on serious density, and resin production is running at full throttle. Time to adjust the parameters step-by-step to optimize the final ripening process. Current Values & Adjustments This Week: Lighting (PPFD): To ease the plants into their final phase and prevent stress, light intensity was dropped down from higher levels to 800 to 600 PPFD. Light Cycle: The photoperiod was reduced by 1 hour to simulate the late-summer transition. EC Level: Successfully brought down from 1.9 to 1.2 this week. We will drop it even lower next week to slowly flush out the medium. pH Level: Stable at 5.8 in the coco medium. A Look Inside the Lab (What the Photos & Videos Show): As visible in the latest media, the setup inside the AutoPot system with the perlite top-layer is running rock-steady. The colas are cleanly trained, well-supported, and allow for excellent airflow through the lower canopy. The buds show a dense, compact structure accompanied by heavy pre-resin frosting, while the entire canopy enjoys a beautifully even light distribution. The final sprint is underway. Next week, we’ll scale down the nutrients further and prep everything for the grand finale! 🌿✨
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
8
Share
@OleGrow
Follow
Day 10: Gelato A hasn't popped yet. Gelato B has.
Likes
17
Share
Likes
6
Share
Removed some lower branches so her energy is focused to the top so far so good.
Likes
1
Share
Loving these ILGM OG KUSH!!! This is my 3rd grow of them and they just keep getting better and better!! The middle one should finish up by the end of this month if not sooner. About 80 percent of the pistols have turned. I am going to start checking trichomes very soon. The will definitely plump up in the next few weeks!!
Likes
27
Share
Chopped tonight so not weighed them yet will do tomorrow if I can. Ended up with 290g for 5 plants But 5 same seeds and 5 different pheno's. Judging by the looks the heaviest weight is from the one I topped . Already weighed one plant got 28g dry weight. Got 4 more babies chopped tonight