Likes
Comments
Share
Starting Week 10, which marks the beginning of the 5th week of flowering. The buds are stacking nicely and the trichome production is ramping up. Tomorrow, I’m planning a defoliation to improve airflow and light penetration. I’ll also be tucking and organizing the canopy to keep everything tucked neatly within the 70x70 space.
Likes
23
Share
Processing
Likes
27
Share
@RastaGrow
Follow
Еще одна хорошая неделя, другая неделя ближе... 😁 Девочкам, кажется, нравится новый свет, хотя они перестают расти в высоту. Вы видите, что они начинают откормлять. Я сделал дефоли... удалил большую часть листьев the big вентилятора с длинными стеблями. Я пробовал эту технику раньше со штаммом сативы, и, похоже, он работает хорошо... Так что давайте попробуем это с помощью индики Ог куш проста бешеная сучка :)
Likes
17
Share
This week ia am planning to let it grow just like this. Hopefully I will receive a plant camera next week to monitor my VPD. Also added an IRheater to keep temperature stable The infrared heater does its job, but I find it a waste of electricity, 3.6 kWh in one night. So I've decided to install a gas heater instead, which delivers the same result at a much lower cost and also provides additional CO2. The heater can then keep the temperature above 21˚C with the lights off. The natural gas heater will be used with the lights on. I need to quickly find a CO2 sensor because too much CO2 has a counterproductive effect, as I've already noticed. Approximately 1200 PPM at 32˚C is optimal as long as I can maintain a DLI of 35. Great technology is on the way. Added: Installed CO2 burner, run it for 6 minutes every hour. Temp raises from 22˚C to 27˚C in about 7 minutes. CO2 detector (just colors, no values) doesn't alarm so not above 1500PPM CO monitor also no alarm :) Running for 4 hours now and a visible change is there. Tomorrow I will know if it is ok or not. Added a few pictures. Lets see if we can see the difference tomorrow. 26-05: Added Dimlux Maxi controller for CO2 and VPD. Works nice. 28-05: Topped a few 31-05 Added additional 300W to heat the stuff up. RH is stable but high on 72%. Could add a dehumidifier but since CO2 is already there and my VPD is around 0.8 I thought adding light would be cheaper. Can go up to 33˚C before my floor is heating up too much. Also cleaned the watertank. So from now on they are on Ata Max
Likes
19
Share
@Comfrey
Follow
Tangerine Dream Auto - Barney‘s Farm Mein erster Indoor Keller-Grow neigt sich dem Ende zu. Es ist bunt geworden im Zelt. Die erste Blüte habe ich bereits vaporisiert und bin ziemlich begeistert vom Geschmack und der Wirkung. Leider habe ich aufgrund persönlicher Umstände nicht im Ansatz geschafft hier ein paar Tagebücher zu führen. Es war für mich ein extrem stressiger Winter und ich bin froh, dass ich wenigstens regelmäßig ein paar Fotos machen konnte. Der Anbauraum hatte zwischen den Pflanzen gemessen eine Minimaltemperatur von 17,4 Grad und während der Vegetationszeit konnte ich die Auto-Damen Tagsüber mit bis zu 28 Grad unter einer Sanlight Evo 4-120 1,5 verwöhnen. 18/6 - Licht/aus. Die Luftfeuchtigkeit war in der Veggiephase bei ca. 65-75 Prozent im Zelt und in der Blütephase konnte ich sie Stück für Stück absenken auf 55-43 zum Ende hin. Gedüngt habe ich ein einziges Mal mit 1:20 sauberem Urin am Ende der dritten Woche. Ansonsten gieße ich auf das Terra Preta ähnliche Substrat ausschließlich mit hartem Leitungswasser mit Ph 7,6. Das Substrat wurde kurz nach der Sämlingsphase mit einer dicken Schicht Laub, Braun- und Grünschnitt Mulch abgedeckt, welchen ich zuvor dreißig Minuten bei 150 Grad im Ofen gedämpft habe (Sterilisation). Es kamen Nematoden, Raubmilben und Gelbtafeln zum Einsatz, weil wir mit einer ziemlich unangenehmen Trauermückenplage zu kämpfen hatten. Anfang der Blütephase kam es zu einer Nährstoffblokade aufgrund von Überwässerung. Das Substrat hält die Feuchtigkeit sehr lange und die Mulchschicht verhinderte ein Austrocknen des Substrats. Wir haben anfangs deutlich Zuviel gegossen und das Substrat nicht etwas austrocknen lassen. Nach Anpassung des Gießintervalls auf alle drei Tage mit ca. 2-2,5 Liter, löste sich das Problem nicht in Luft auf, aber wir konnten es aufhalten. Meine Pflanzen sind bereits geerntet und hängen zum Trocknen. Viel Spaß mit den farbenfrohen Bildern. Happy Growing! 💚
Likes
51
Share
Que pasa fumetillas, ya estoy de vuelta y traigo la quinta semana de floración jaujas, que aromas que desprende esta variedad, y como tricoma 🔝, que más se puede pedir. Bueno por pedir, que no se caigan del peso de las flores en semanas que salga cantidad pero que no caigan 🤣. Buen porte andan también con buen color, y las flores están prietas prietas 💎 . La humedad esta al 45% la temperatura está entre 21/25 grados , y como siempre el ph , ya que es de lo más importante,está en 5,8/6,0. . AgroBeta: 1 ml x L Flowering black line , vía radicular. 0,2 ml x L Beta shark, vía radicular. 0.5 gr x L mega PK , vía radicular. 0,8 ml x L Terminator, vía radicular. 0,5 gr x L Engordacogollos, vía radicular. 0,3 ml x L Tucán , vía radicular. 0,1 ml x L Betazyme, vía radicular. 0,3 ml x L Tricoma, vía radicular. 0,05 ml x L Gold Joker, vía radicular. 0,2 ml x L Silver, vía radicular. . Hasta aquí todo familia 🕸️ , un saludo y buenos humos fumetillas💨💨💨.
Likes
50
Share
Eternity Grow Cup - Week 9 Veg Update We are stepping into Week 9 of vegetation, and things are getting exciting! The plants are thriving—compact, bushy, and growing beautifully. This week, we introduced a SCROG (Screen of Green) net, an essential tool for maximizing yield and optimizing plant structure. Let’s dive deep into the why and how of scrogging: Why Install a SCROG Net Now? Maximizes Light Exposure: The net allows even light distribution across all branches, ensuring every bud site gets the optimal amount of light. Controls Plant Height: By guiding the branches through the net, we keep the canopy even and prevent excessive vertical growth. Enhances Airflow & Reduces Mold Risks: Spreading the plant out increases air circulation, reducing humidity pockets and minimizing risks of mold and pests. Increases Yield: More bud sites exposed to light mean higher-quality flowers and greater overall production. For now, we’re still not using the under-canopy lights, though they will come into play soon. The ICL 300 is positioned strategically, and we will likely move them around as needed later. For now, the focus is on structuring the plants and ensuring they fill out the available space properly. Optimizing Airflow - The Vortex Effect Air circulation is crucial for plant health, and this week, we’ve optimized airflow by positioning the fans to create a vortex effect: Fan Positioning: Each fan is placed at the tent corners, pointing in different directions, ensuring dynamic airflow instead of direct wind hitting the plants. Benefits of a Vortex System: Reduces hot spots and evenly distributes CO₂. Strengthens stems by creating a natural resistance. Prevents stagnant air, reducing mold and pest risks. The extraction system is powered by an AeroFan, connected to the AeroFan Smart Remote FRC1, currently running at 60% speed. This setup efficiently manages humidity and temperature while maintaining optimal air exchange. Current Environmental Conditions & Feeding For now, we’re maintaining the same water schedule and nutrient regimen. The environmental conditions remain stable: Temperature: Holding steady at ideal growth levels. Relative Humidity: Balanced to encourage healthy transpiration. PPFD (Photosynthetic Photon Flux Density): Kept at optimal levels to support vigorous vegetative growth. CO₂ Levels: Elevated but within safe limits, promoting faster growth. The plants are filling the space beautifully, but we know that the flip to flower is approaching soon! The next phase will depend on how fast they continue to spread, and adjustments will be made accordingly. Closing Thoughts & What’s Next? This week was all about structural optimization—ensuring proper airflow, training the plants with the SCROG net, and keeping everything in balance before the transition to flower. The upcoming weeks will be crucial, as we fine-tune the environment, possibly introduce the under-canopy lighting, and prepare for the flowering stage. A huge thank you to our sponsors Aptus Holland, TrolMaster, CannaKan, Grove Bags, Ziggi Papers, and of course, Zamnesia, Plagron, and Grow Diaries for making the Eternity Cup possible. And to our incredible community—followers, supporters, and even the critics—we appreciate every single one of you! Stay tuned for next week’s update, and don’t forget to follow along on YouTube and Instagram for exclusive content and behind-the-scenes looks! See you soon, and happy growing! Let’s keep pushing forward, and best of luck to all the competitors—we’re all growing something incredible together. Until next time! Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol Master https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags
Likes
12
Share
@Babajipaz
Follow
01/08 The plants are growing strong and the topping was a success! I started using SCROG to help me bend the stems easily and it seems to be working like a charm! I adjested the feed as recommended by the manufacturer and they seem to take it just fine 04/08 I've been away the past couple of days, it's been hot and the babies were thirsty! I decided to change to final 18L pots so I give them plenty of time to accommodate before flowering. The plants look healthy, no sign of anything wrong, I just think they needed water. I kept the same soil composition, kept the same feeding and we'll see in a couple of days how they recover.
Likes
28
Share
Buds are still fattening up, larger fan leaves are showing an early nitrogen deficiency which is allgood. Temperatures are dropping, averaging 23 during lights on. Good timing coming out of summer, i get to see the plant through without havesting due to earlier trichome deterioration. Now running UVB 10.0 reptile light only 15w 60cm fluorescent t8 tube for 6 hours in the middle of each light cycle. Couldnt find any arguement that could sway me so im doing a trail and error, 15w is pretty safe if not too safe? Spose il find out, though its hard to tell without running a side by side little experiment. Buds are dense, decent trichome dovelopment, no sign of amber...girls are happy, im happy.
Likes
3
Share
Another week of autopilot, the girls have almost all doubled in size in a week, still looking good. Now feeding 2.2 ec still doing 5L /48 hr and still on 24/0 light. Veg channel 55% bloom 25%. Will increase bloom once pistils appear and transition to bloom nutrients, until then will stay on their current feed schedule and potentially increasing to daily feeds instead of every other day. Will not be topping or fimming these ladies, and will resist the urge to defoliate as much as possible. By start of week 5 Scrog will be installed at 50cm, with a second layer planned for around 90cm. Plant sizing from start week 3 to start week 4 Pm1 16cm - 30cm Pm2 21cm - 40cm Gc1 16cm - 30cm Gc2 14cm - 27cm Gc3 22cm - 38cm Gc4 20cm - 37cm Edit - had a look, pistils are there so have started a transition to flowering and reducing super n+ cal/mag
Likes
57
Share
Hi everyone, Weed brothers. Here we are ready for a new week of fire! My dolls have been transferred under a wider tent with the hope of opening up their final yield .... It's very hot ... let's get the best
Likes
10
Share
Extrema producción de tricomas de esta variedad! Gran parte de los frutos lo usaré para extraer rosin, su resina se ve ideal para este propósito. Fragancia exquisita a ponche de fruta dulce, con notas ácidas y un fondo de especias. Como mencioné anteriormente dejaré la parte de la reseña de efectos, sabores y sensaciones para cuando los cogollos estén secos y curados, por ahora solo puedo apreciar lo que mi vista y olfato me permiten captar. Totalmente conforme por la calidad de estas flores y agradecido de los amigos de Sweet Seeds por la confianza. Será hasta la cata entonces, buenos humos!
Processing
Likes
3
Share
Likes
4
Share
@Hix57
Follow
Le 42e jour ce passe très bien. Les plantes sont au milieu de la prefloraison et ne vont pas tarder à arrêter leurs croissance pour se concentrer sur les bourgeons ainsi j'adapte l'alimentation au circonstances. J'ai rattrapé l'erreur de pH même si cela reste précaire les plantes se portent dans l'ensemble très bien 🌱🙏
Likes
9
Share
June 28: Sunday Punch EV continues to impress with its rapid growth. I love the late veg stage where plants grow more than an inch per day. June 30: two inches in two days. July 2: hot today at about 33C.
Likes
16
Share
@Canadian
Follow
I did not now the weight of how much dry or wet flower I have because I decided to freeze right away all of the flower and after 24 hours in the fridge I created bubble hash unfortunately I only took pictures of the first batch total amount 58.6 grams of bubble hash of excellent quality despite treating this plant really badly it give me a very abundant flower With incredible density
Likes
28
Share
@Chubbs
Follow
420FASTBUDS FBT2307 Week 8 These 3 ladies are growing great. All at different stages of flower seems like. Stacking nicely in-between nodes. No really big issues and still feeding nutes every 3rd watering. All in all smooth sailing. Happy Growing
Processing
Likes
3
Share
@Sammy23
Follow
La semaine était très froide. La plante était en intérieur souvent. Très peu arrosé mais un peu quand même. Les bourgeons grossissent et prennent en maturité doucement mais sûrement. L'odeur est très alléchante...