Sexta semana de floración (Movilización de Nitratos - Adición de Mo) Momento crítico: Integramos 0.5 ppm de Molibdeno. En esta etapa, el Mo activa la función de la nitrato reductasa para catalizar la conversión de los nitratos acumulados en las vacuolas hacia la síntesis de aminoácidos y proteínas. Buscamos limpiar el tejido de sales nitrogenadas residuales, redirigiendo toda esa energía química hacia la densidad final de la flor

Fast version B is doing good. She us vegging right along. Everything is looking good. Thank you, Dutch Passion, SSSC, Athena, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Moved to a bigger tent and added two additional plants so I could have everything in one spot. The plants in this diary are on the left side of the tent and along the back wall. The other plants are another GSC clone that is a little smaller, and a Wedding Cake from Seedking.com. they are being grown the same way as the others. I'm very impressed with how the GSC clones are flowering relative to the gorilla glue. They are just way more dense and bigger flowers. Fingers crossed the gorilla glue fills out.

Hi all 🧑‍🌾 Welcome to my 🍌💜👊 week update. Hope everyone keeping well and having a great week😁 Thank you so much for so much support on this bananas ride 🙏💜💚💜💚 Everything still going pretty well. Girls are developing and stretching like crazy. Athena currently Dec 14 90cm and main stem of Xena is not far of this height either. Unfortunately noticed first signs of calcium deficiency(my opinion) on Athena. Thankfully started feeding both girls with calmag weeks back but the dosage wasn't not enough for Athena. Started small treatment very next day on Dec 11 (see description below) I belive got my baby back on right track. Week 9 Dec 11-17 Dec 11 Watering was planned for Tuesday but due to calcium deficiency decided for a little treatment. Watered both girls with mixture of reduced content of growth nutes by 50% calmag at 1.2 ml per ltr. Reduced solution PH to 6.2 as apperently it's ideal for calcium consumption. Over period 4h I have watered Athena with 5ltr with couple runoffs. Xena 3ltr. Total of 7-10 leaves affected mainly at top colas close to the light. Dec 12-13 Purely observation and all looking well. Of course all affected leaves will progres of showing signs but good news is that growth and development booming and don't see any new leaves with symptoms. Very nice trichomes development in recent days and more and more colours. Dec 14 Second watering for this week 6.5l Increased calmag to 1.4ml per ltr and if still things will be looking well reduce to 1 or 1.2 on next feeding. Dec 15 Very nice respond on yesterday feeding. They definitely fatten over night and getting more and more frosty. Will need to remove some foliage soon as getting extremely bushy again. Dec 17 Xenas main stem top cola almost touched the light today. Tied her to left side of the cabinet, applied selective defoliation on both girls, tied few branches to netting and on the end of this busy day a third watering for this week. 7 ltrs beetwen both. Runoffs Xena PH6.4 Athena 6.3. Very nice week have to say. I belive that calcium deficiency on Athena is no longer a case here and both girls developing very nicely. Both are still stretching, buds are gaining in size and both girls started exploding with trichomes, Thank you all again for such amazing support 🙏peace and love brothers and sisters ✌️💚💜💚💜💚 Stay tuned for new week update 😉🧑‍🌾✌️💚

The middle and end of week 7… it all seems to be going smooth 🤞🏽👌🏽 #4h02o

Update week 15: I have been flushing them for a week now. I will let them go an additional week and then I will probably harvest depending on the trichomes. They smell lovely, the DGx3BOG smells like gummy bears and the Tangie smells indeed very citrusy.

Hey everyone 🤗. Today they were planted in their 11 L pots 😀. Now the root growth can really accelerate. When repotting, a total of 3 g per liter of Green House Powder Feeding Bio Grow was added to the Canna Coco 😊. That's enough for 8-10 weeks :-). I'm curious what they are doing this week and I wish you all a lot of fun with the update :-). Stay healthy and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

soo one was way more photogenic than the other 😅 also I know I put a lot of videos but I'm obsessed with this strain ok? it's amazing and I'm proud of me😁😁 oh and how DOPE is the timelapse? 🤯🔥🔥🔥🔥

Die letzte Woche steht der Dame bevor, nächstes Wochenende wird geerntet. Damit ist dann auch der Automatic grow abgeschlossen und es kommen über den Winter neue photo's ins Zelt.

I won't say it was a perfect growing experience, because i kept running into problems with keeping the lights a good distance away, but that was the most difficult problem I faced. It was definitely a very successful do-over. Both of these plants easily were 2 times the size (width/height) of my 1st sour stomper attempt, they yielded at least double and in Plant A's case...triple. And all by the few simple changes of using LEDs earlier in the grow, larger pots, being in a tent and having one tiny duct fan. My nutrient regimen stayed pretty low and for the most part the same as previous grow. However in my opinion one of the most crucial differences was having them in the 3 gallon pots. They didn't dry out as quickly and they were able to be soaked more effectively than the 1 gallon smart pot had been. For me this was a very important grow on grow diaries as this was basically Part 2 of my first indoor, man made grow. Learning these minimal differences in how to have plants turn out enormously better was essential to any future indoor grows I might do, even though I'm sure i just skimmed the surface on potential problems that could occur and how to fix them. The buds from this grow were not only dense enough to be worth smoking, but every piece of the plant including its leaves will be useful for pressing. The couple presses i did on this plant so far had a beautiful golden color, an amazing smell, and had zero plant byproducts inside it from using the 90 micron bags. The only downfall with the micron bags and the pucks are they retain a fair amount of the pressed rosin, the only solutions I can think of would be to add them to an edibles mixture or to stack them all up and continue repressing. All in all this was a fantastic grow, and I'm very grateful for all the support and for mephisto for making such a solid strain.

Following RQS auto guide : https://www.royalqueenseeds.com/blog-how-to-grow-autoflowering-cannabis-n83 WEEK 3: VEGETATION WELL UNDERWAY #15 29.3. - #21 4.4. #15 29.3. -Nothing done on this day, except remotemonitoring #16 30.3. -Watered with nutes mix and with PH- mix -Filled hudfr. -Increased exhaust fan from 1/2 time on to 2/3 time on. -Modified the old LST's and bent rest of the plants too #17 31.3. -Watered again, with nutes mix and with just water, 3liters. -increased exhaus to be 100% -Shutdown humidifier -Tent now at 22c-25'c and about 40% hum. -removed the 3in1 meter, was just bs... -Otherwise growing nicely. #18 01.4. -Nothing done on this day, except remotemonitoring #19 02.4. -Nothing done on this day, except remotemonitoring #20 03.4. -Mixed all nutes to a 1,5liters , then mixed that with water to an 3liters and Watered with that solution, so about 0,75liters/pot -more LST as the plants are getting bigger -Removed humidifier from tent, as the hum. stays between 30-40% even with exhaust fan at 100% on. -Moved the temp diode closer to side of strskllr pot, as it got "too" close to plant leafs -Added pictures of LST and 2,5hours after it, noticeable change in plant directions, so immediately they are turning towards lights (as the should) -Oh right, 'cause there is 2x purplematics, i kinda FIMmed the other with just my fingers, at least i got some leaf heads out, so might been fimmed might not been fimmed, will see if there is any difference compared to his mate in the same pot.. #21 05.4. -Again a "last day of the week", this week must been "fastest", possibly 'cause again a day with "nothing done , just remotemonitoring" in diary also. -Will start watering more next (0,5liters/24h/plant stated in RQS guide 'bout growing autos : https://www.royalqueenseeds.com/blog-how-to-grow-autoflowering-cannabis-n83 ) -Also next week should be the last week in VEG phase, there was already some minor smell in tent, even with coalfilter at exhaust line intake, but id say no flowering nodes yet visible, will take "close-ups" after i spot any (nextweek) -Will not use Buddy next week, unless there is any visible flowerings, after that should be used accordingly.

Turmoil

All I can say is WOW! Sour Diesel Haze is HUGE! Tons of bud sites developing all over and looking beautiful! She has the potential of being my largest plant to date! Looking forward to watching her buds fatten up and harvesting. 👍

Hi everyone...🍃🍃🍃Everything is going well... 🍃🍃🍃The girls are growing very fast which makes me happy... 🍃🍃🍃I defoliated in 14 days of flowering and removed the small flowers that wouldn't do anything anyway.... 🍃🍃🍃 Happy growing🍃🍃🍃

Space is limited and I'm struggling with the time to keep up with these plants since things are back to normal on my parts of town. Just gonna keep about eye on em at keep defoliating

Que pasa familia, vamos con la tercera semana de vida de estas Tropicana poison F1 de Sweetseeds. Vamos al lío , las 3 plantas seleccionadas fueron trasplantadas a su maceta definitiva, tiene algo de shock por el trasplante, pero esta semana las recuperamos todas. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 18h de luz, el foco está al 75% de potencia. Hasta aquí todo, Buenos humos 💨💨💨

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?