Likes
Comments
Share
Feed all 4 plants with nutes this week. Money Maker and Chocolate Skunk received 100% of the formulation while both GPA Cookies strains received 50% strength. I also added the AC Infinity Cloudforge T3 to generate more humidity and this seems to be helping! Got the Photone app to help me calculate PPD and adjust light height.
Likes
111
Share
@DreamIT
Follow
🍋🥧🏎️ LEMON PIE AUTO BY FAST BUDS 🏎️🥧🍋 🍋 12.3 ... 🍋 13.3 I missed a week of update cause damn covid that is slowing down my every project. however the plant takes shape, I hope to be able to constantly resume updates 🍋 14.3 🍋 15.3 🍋 16.3 🍋 17.3 🍋 18.3 ____________________________________________________________________________________ ❌❓Not sure where to buy your seeds? 😮 Fast buds literally ships all over the world, check out their site! http://bit.ly/FastBudsgood __________________________________________________________________________________ 📜 A look at the details of what I'm growing 📜 🍋🥧🏎️Lemon Pie Auto 🏎️🥧🍋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 50% Indica / 50% Sativa 🎄 Genetics ▪️ Lemon Pie X Autoflowering Genetics 🚜Harvest ▪️ 450 - 550 g / m² 🌱Vegetation ▪️30 - 35 days 🌷Flowering ▪️ 30-35 days ✨THC ▪️ 24.0% ✅CBD ▪️ 1.0% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ Greenhouse 🎂Release Year ▪️ 2020 __________________________________________________________________________ 📷🥇 Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinions if you pass by here🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟
Likes
3
Share
Changed my plans a bit so they probably won't move to another location ( or they really have to outgrow their current pots... ) so added some additional lights and raised my EC a bit. Also added CO2 to 900PPM but not sure if continue with that. First time CO2 out of a bottle instead of a generator. If it is too pricey I will quit that. 07-09: YES!! I have an extra room available so I am moving these ladies to a bigger place.. will keep you up to date.... From 5.7 to 30 liter pot size (a bit late to switch but I do believe they can profit from it.) A few hours later.... Well, that's not easy at all... taking a break for a moment... Checklist for myself: The tent is up and checked for leaks (ugly thing, but no complaints for fifty bucks) Lighting is installed at the correct height CO2 is in place, needs to be moved to the right spot Exhaust is installed (still need to tape the transitions) Still need to install Blumat (but first repot the plants due to positioning) Install the water supply (yes, I should have done that first...) Meh... another hour or two. Hopefully, they don't mind being without light for about 3 hours. A few hours later.... Well, that was a lot of work... but thank goodness it all worked out (just need to install the Blumats, which I'll soak in water shortly). Besides that, I now have a water supply and drainage available, which makes certain tasks much easier. Hand-watering was pretty fun (the plants were doing well so far), but it was a lot of work for 12 pots. Having to use a syringe every day for dosing just isn't my thing. The plants are suddenly looking very small again, though. But well, now they can literally grow in any direction. I'll quickly check how they did overnight, and then the lights will be going out again soon. And then quickly took some photos just before the lights went out... The ladies seem to be doing just fine, with their leaves happily pointing upwards as if they're waving cheerfully. The CO2 has been used up quite quickly; the bottle is empty, which isn't surprising given the large tent. I'll refill the bottle shortly and see how long it lasts this time. I think trimming will be a bit easier this round. Tonight, I'll lower the lights a bit to around 30 cm and hope they can handle the doubling of the light intensity. They were doing well last night, at least. The temperature is on the high side (33˚C), but that's not surprising given the current outdoor temperatures. I expect that once we have normal temperatures again, the temperature will settle around 29˚C. #SSSC_John Thank you very much for this outstanding strain so far...
Likes
38
Share
Utopia Haze is a rare heavily sativa dominant hybrid (90% sativa/10% indica) strain created through back crossing Brazilian Sativa strains. This tasty little bud took home 1st Place for Best Sativa in the 2008 High Times’ Cannabis Cup and for good reason – with its potent 18-22% average THC level and long lasting cerebral effects, Utopia Haze is one powerhouse smoke. The Utopia Haze high comes on soon after you finish your first toke, hitting you with a strong cerebral lift that infuses you with a sense of hazy relaxation. Type: Feminised/Photoperiod Cultivation: Indoor/Outdoor Flowering Time (days): 70-75 Indoor Yield (g): Up to 650 Feminised Outdoor Harvest Month: October Feminised Outdoor Harvest Month Week: 3rd-4th week Aroma: Citrus, Woody, Pungent, Mint Effect: Cerebral Lift, Hazy Relaxation, Sleepy Welcome Everyone to the Final Entry of my Utopia Haze Grow ! There is so much to discuss ! I have been extremely busy as of late trying to get this Harvest together, but i am happy to have it here for you now ! I Seriously under estimated the amount of time, help from others, and my own necessary skills to pull this off.. and i still kind of screwed it up lol ! But its worth noting i have never actually done this before and trying to document it during....was extremely hard. It is next to impossible to work an iPhone with rubber gloves on ! First I want to discuss everything step by step so before you jump straight into the comments on how the end product is so small in "quantity" Rest assured i am happy with its"quality"...and thats all that matters to me because Life is a journey not a destination! and i have learned so much from this grow that I couldn't be any happy even if i messed some things up :) But at the very least I hope you read through this entry in its entirety with an open mind and focus more on the process, rather than just the outcome! I ran out of Ice & i was only able to wash three times..(normally I've heard you should go sometimes 5-6 washes) Preparation is Key & things will be much better next round :) Photos 1-22 These are pretty self explanatory but for those of you just tuning in now.. this is what happens to a very happy plant when you don't have the necessary tools to monitor key components of growing cannabis.. Ph, as well as EC levels play a very key role in the outcome of your grow lol that being said I was just able to save this plant by purchasing both tools but that doesn't mean the plant didn't suffer because of the prior events.. This was a Huge reason behind me choosing to turn this harvest into what i would consider "Solventless Hash Rosin" from "Ice water extracted Bubble hash". Pictures 23 The idea here is the process of using "fresh Frozen Cannabis" this has been discussed many a time online on such sites as instagram and here on grow diaries as well.. I personally have Never tried the process so i decided to try it out and make a judgement for myself.. Video 24 The Cannabis has now been in the freezer for 72 hours making it very well frozen.. as you can tell i struggled getting it all into the 25u Screen Wash Bag. One thing of note i would do differently is i will de-stem my next batch as i also believe this played a part in the amount of plant matter that escaped through the sieves. Photo/Video's 25-28 The idea here is "ice water Seiving" & especially with the bags that I am using here that are only have screen material on the bottom portion of the bag it is very important to have spaces in-between the screens to allow the water to pass directly through the screens into the bottom bucket with the least amount of resistance.. because the hash is so extremely temperature dependant if it gets warm on the side of the bag.. it will stick there and not make it to the bottom to become use able product.. 29 You do not need to use as much Ice as i used here lol... the idea is to keep everything very cold..i certainly achieved that but at the sacrifice of using so much that i ended up grinding product and producing "contaminants" but in the end they are just plant matter that i would be smoking when i rolled up my joint either way so.. I'm not super disappointed.. But it should be noted that what you want to achieve here is a Layering effect where you have the wash bag between two small layers of ice while the "water current" washes the Trichomes away allowing them to be separated by the screens setup below :) Before Starting the machine you should allow some time (i.e.;10-12minutes pre soak to allow the product to become saturated) before the first cycle. By video 32 I have just ran out of ice lol.. Video 33-34 Here I have a tip for you.. to separate the screens that you sieve through.. cut 5 gallon buckets to stretch them across nice and tight.. it'll make scooping your Bubble that much easier ! i learned this from the many "Frenchy" videos I have watched :) Picture 35 Here in lays the problem for most people.. drying your hash without loosing vast amounts of "Terpenes" whilst also stay ever vigilant against mold ! Thanks to all those videos I've watched on youtube.. id like to think this was one of my most successful parts of this process.. Things to Note; Terpenes start to seriously evaporate at temperatures 68F or 20C you need to stay as cold as possible whilst bringing the Relative Humidity in the space down into the 40-30% to stay away from that nasty mold ! I used my cold storage room in the basement.. with a dehumidifier running to keep the space at 45% RH & staying at a constant 15c. All while spreading the hash as thin as possible across parchment paper, on top of the white screens with a fan moving air across both sides of the paper. Pictures 36-38 These are some macros i took in the middle of my drying session I fell in love with the colour. Yes i know the black spots are plant material but they will get caught when i bag the hash & squish the oil out. Thing to Note; at this stage it is important to ensure you 'micro plane" the hash down as fine as you can whilst staying weary of the temperature... any "chunks" will hold pockets of moisture.. that lead to potential problems..ie; mold ... Picture/Video 39-41 Successfully planed bubble hash ready to be bagged and Squished ! Picture 42 Ive decided to follow Pedro.. from Pedros Grow Room and double bag to be on the safe side so i don't have any blow outs. So thats One 25u bag inside one 160u bag ! :) Pictures 43 This is almost 3 grams of the bubble hash from above, already melting in the bag.. this is where i ran into trouble again lol things started getting to warm in the house and i was only able to get one of the three squish's i did on video :( things started getting sticky. Picture 44 This is basically just a photo of the equipment I'm using; 3x5 LowTemp Cage in the frame I built myself, with a 20Ton bottle jack. Something to note here is this is an older Lowtemp model with only a single heating zone which is which i have it closed here heating Both sides of the press :) As well as the importance of having adequate pressure on your plates.. my rig is very overkill for the size of hash bags..lol Video 45 Here is the lovely press video.. its didn't quite work the way i wanted either lol my directional folding wasn't quite tight enough for a big "drip" :) &the Press was set to 65°c Photo's 46-50 are pretty self explanatory :) I had a blow out.. but still managed to pull an 80% return from the hash once squished...& yes it tasted amazing :) Was it worth it in the end... that could be debated.. for some..i understand..its not your thing, but for those of us that are interested in making our own concentrates.. free from Solvents... I wouldn't make it any other way :) If even ONE of you reading this diary finds it helpful to reference for ANYTHING.....even if its "what not to do" ill consider it a success ! Thanks again for tagging along on this garden adventure.. its been one heck of a journey ! Much Love from B.C. Canada, Until Next time, Cariboo
Likes
4
Share
@GeminiCQC
Follow
ABxRKO is about 42.5" tall, and has been top dressed with about 3tsp of grow dots to give it a phosphorus boost in flower HBSS is about 26.5" tall and has been top dressed with about 2tsp grow dots as I believe it is fighting a phosphorus deficiency. She is giving all the smells, a bright red starburst like fruity smell with a stark citrus note.
Likes
5
Share
Likes
21
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.
Likes
22
Share
D97 F50: what a week!!! I can't believe it, the plants are more and more fragrant, the flowers are bigger and bigger... I expected less than that! I started the flush with simple osmosis water, corrected with a PH of 6.1! I managed to increase the EC from 2.1 to 1.3, with about 4 liters per plant!! I was able to remove the excess water in the tank using a pump! I'm aiming for an EC between 0.1 and 0.5 for half of week 9, before letting them dry on the foot. In any case, there are fewer seeds in my flowers than I thought, I tried to remove a few seeds with tweezers, it worked for a few plants but the code red #1 didn't like it... some pieces of flowers dried a little and some trichromes matured faster!! I'm not touching anything anymore smells: Papaya Bang Bang #1: smells of exotic fruit candies, especially papaya, very deep and addictive!! a banger LA Vanilla cake #2: smell of gas with ripe fruits, very cali gelato Papaya bang bang #2: smell of exotic fruits on a very earthy background, a little og, it's not really what I was looking for but it looks interesting! I think it will be round in the mouth cherry gar see ya #4: smell of exotic fruit compotes on a very fresh background!! white runtz x Hollywood: a banger!! a very resinous runtz smell, almost rosin, with smells of lemongrass, ginger... I've never smelled that in my life!! code red #2: smell of tangy strawberry, simple, not so many smells in the background, almost a little citrus Code red #1: a banger too! a smell of strawberry syrup, cream, sugar, I can't take my nose off when I smell it B-45: smell of citrus, grapefruit, with a bug background that I love LA Vanilla Cake #1: very cali, gas, good gelato too, but without fruits no TCO for the last two weeks, or very light! I'll give you the recipe anyway in my flowering TCO, I put: - kelp hydrolysate - epsom salt - bat guano - mealworm guana - castor bean shell ash - palm ash - vermicompost - blackstrap molasses - elycitor -Yeasts Saccharomyces Cerevisiae Bottom right: LA vanilla cake #2 Bottom middle: Code red #2 Bottom left: Papaya bang bang #1 middle right: cherry gar see ya #4 clone middle: white runtz x Hollywood middle left: Papaya Bang Bang #2 Top right: Code red #1 Top middle: LA vanilla cake #1 Top left: B-45
Likes
4
Share
@QixxGrows
Follow
Day36, 37, 38: Seems to be growing a set of leaves per day now. Super growth! Stretching to the top. Day39: I had a hiccup with the camera. For some reason it stopped responding at 04:30 in the morning. I only realized it much later. I still don't really know why, but reseating the data ribbon fixed the issue. Day40: After fixing the camera, I decided to take this view again. The Lady is starting to show some nice growth and this view will show it best. If you look carefully, you'll see that her branches are not green, but rather reddish. Definitely related to genetics :) Everything else is within limits. Plus, the leaves look super healthy. Day41: Here you can see the stem colour better.
Likes
12
Share
We’re approaching the finish line — the top buds are already nearly perfect. I’m just giving the lower ones a few more days before putting her into a 48-hour dark phase.
Likes
14
Share
@nine666
Follow
Everything has been growing great this week! These autos sure do grow fast! but did have a slight issue with the Fast buds BlackBerry getting a little bit too top heavy so I moved her closer to the light. The video above is from day 13 and the Honey Peach CBD from SweetSeeds that is in the back left pot was about 5/6 days old
Likes
45
Share
it's always a pleasure to do business with Barney's Farm!!! They have never let me down even once!! Even in the worst situations and conditions they have always been able to bring out the best for me!! I really enjoyed forcing these plants to see their reactions, but I wouldn't do it again as a technique because it only serves to keep the canopy low but not to increase the yields...or...at least in my case I didn't find it of fundamental importance....maybe a simple cut of the apical top and that was it! but that's fine!😋
Likes
2
Share
Likes
5
Share
@Naujas
Follow
the girl went out into nature, although the weather is not very suitable for them yet, but I think she will manage perfectly :) I will visit them once a week :).
Likes
15
Share
@Stick
Follow
I made a full timelapse of the run, make sure to watch it in my harvest post! This run was a full success, thanks to good genetics + good lights + good nutrients, I'm very happy with the outcome. Thanks to everyone for reading this diary, and stay tuned for other grow reports! 😎👊
Likes
8
Share
@artems
Follow
Scrooge has bounced back after the trim, looking much improved. It's also showing more active feeding. I've started watering it separately and keeping a close eye on its progress. 🌿💧 Keep up the good work!
Likes
2
Share
Likes
19
Share
@Naujas
Follow
79 dienos!!!! Artimiausiomis dienomis žadama daug lietaus, tad nusprendžiau nerizikuoti – dėl puvinio, o šiandien ją geniu :) Mergaitė atrodė tikrai stipri viso augimo metu, atlaikė daug lietaus ir didelį karštį :) Ir be viso to, ji sunokino tikrai gražius prinokusius žiedus, pilnus trichomų :) Jų aromatas turi gaivų vaisių kvapą, nekantrauju jų paragauti :) 150 g drėgno derliaus iš mano mažo 8 l vazono ir balkono šiaurinėje pusėje, manau, tai tikrai geras rezultatas :) Mergaitė gavo @Plagron maistinių medžiagų viso augimo metu, jai patiko :) Po derliaus išdžiūvimo bus atnaujinimas, sėkmės visiems.
Likes
70
Share
All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 70/0 Flipped to 12/12 - increased ppfd by 100 and worked to stabilize temps/humidity with new gear. I used 15 minutes of IR light before main lights and then 30 minutes of UV light at mid day and will still use 15 minutes of IR light after main light are out. I plan to increase the time of UV lights to a max of 2.5 hours per day mid day but for now Im easing her into the treatments. Watered with 1.12 gallons of 6.3ph de-chlorinated tap water, used 50ppm of veg mix and 50ppm of bloom mix in the water. VPD is mostly steady 74F/65%RH/33%ILV Day 71/1 tested and calibrated my meter, tested the top soil 1 day after feed for ph - tested 4 times for an avg of 6.48 Trimmed brown leaves and did some HST/LST training/binding. Took control pics for UV treatments of 15 minutes per day. Will monitor and increase weekly it she holds up okay. Still doin 15 minutes of IR light before and after lights on/off. PPFD after training was 630 at highest and 540 lowest. VPD was 74F/60%RH/33%ILV Day 72/2 Just a watch today, VPD was 75F/60%RH/setting 4/10 of ILV (about 33% like the last tent) PPFD ranged from 530 to 650. I only used 5 minutes of UV light today as she has a tinge of browning on the tips of a few leaves. Im not cutting it out completely because I still plan to use upto 2.5 hrs by end of flower, so she needs to adjust. Im also still using 15 minutes of IR before and after main light schedule. Her stretch seems to be picking up, from 16 inches 2 days ago to 18 today. Day 73/3 VPD same as yesterday 75F/60%RH/40%ILV PPFD hit 670 at highest and 550 at lowest. Stayed with 5 minutes of UV light and monitored burnt tips from previous days... no spread, so I may add 5 more minutes tomorrow and monitor. 15 minutes of IR before/after main light schedule. Growth continues, another inch in stretch to 19 inches. I turned her slightly because there are still two runted colas that I rather provide more light to. It's been 3 days since last feed and I think with as much growth as she's putting on, I should feed again tomorrow. Im still introducing nutes in lower portions but will add 300ppm and feed about 2 gallons at a 25/75 ratio of veg:bloom mix to see if I can get some run off to measure conditions. Day 74/4 Watered with 2 gallons of 6.4 ph de-chlorinated tap water. I added 300ppm total of 25% Veg/75% Bloom. Starting ppm was 296; ending was 595 and I added a pinch of epsom salt. Poured over the whole base until I got runoff - Since I was so close to the whole 2 gallons, I used it all. I only used the feed water over the roots today as I want her to get the nutes from the soil since the transfer into new soil was so recent. So far VPD is 75F/60%RH/40%ILV. No issues with controls. PPFD was upto 700 at center so I raised the lights to almost 42" from soil - Since the plant is almost 20" that's 22" leaves to light. New PPFD now ranges at 480 to 650 on 70% power. I increased UV time to 10minutes today and took control pics for light burn. I am still using 15 IR before and after main lights. Took some black back picks since I think she's looking good now. Day 75/5 Started the day with evaluation of ph and control pics. Comparisons show no further spread of lock out issues from earlier or light burn of a more recent change. Upto 20 inches before HST/LST today. Meter was tested/calibrated and soil ph was tested 4 times for avg of 6.34 (yesterday's runoff was about 6.35 too) Soil temp is about 66F. Also tested CO2 and got 1050. Room VPD was 74F/60%RH/30%ILV I spread the leaves further apart because I noticed there were two colas not getting as much light and somewhat crowded by the colas near by. So I positioned the larger part of the tomato ring around the limbs extending here out to 32x32 and the used HST/LST to break and bend the center colas inward clockwise (I think I went a bit too hard on one as the others already show a bounce back and now one is still limp-ish (will monitor obviously) But with that the height is now 18" so 32x32x18 - but here's the kicker, I only have a 24x48 tent, so there's a few colas touching the walls and doorway now, so I may have to reconsider the larger ring. New position, new PPFD right?, not exactly, for some reason these settings still gave me range of 480 to 650 as I had yesterday with just a few more of the outer colas have 480 than yesterday. However, there's more light getting lower levels now and I only had to cut 1 leaf. Which is good because I did 15 minutes of UV today with the regular 15 minutes of IR before and after main lights. Day 76/6 VPD is a lil wonky now as humidity is starting to go up in the tent - so I plan to put in the dehumidifier this weekend and just leaving the humidifier off today and tomorrow. Heat seems to also be ticking up - so I reduced the temp on the heater and will monitor. Temps about 75 to 76 - humidity at about 62% as high as 65 though and Im trying to be at or under 60 this week. Increased ILV to 40% I repositioned the fans to hang on the lights while blowing down onto the plant. I tried to make every leaf dance a little. LST seemed to hold up okay - had to reposition a few branches and thinking I may have to build a larger box this weekend since the colas are now pressing the door and back wall. PPFD is between 470 and 700. I used 15 minutes of UV mid day with 15 minutes (30 total) IR before and after main light timers.
Likes
16
Share
Aug 17: she is looking happy at the start of the fifth week since I started force flowering. Buds are forming and everything is on track. Very nice plant. Aug 18: nice enough day after a small bit of rain early. Tops are progressing nicely. Aug 20: hot and sunny so extra water again despite some rain last night. Aug 23: added another Scrog layer. This seems like a really good way to stabilize the plant while holding things in place for maximum sunlight exposure.