Dear Friends, 👨‍🌾 👩‍🌾 we are here to show you our journey with the BLUE SUNSET SHERBERT™️ by Barney’s Farm. Germination started on the 10/11/2022, the root sprout on the 12/11/2022. 27/11/2022 Transplanted into 15L Smartpot ✅ VEGETATIVE week #5 📅this week goes from 12/12 to 18/12.📅 💡💡💡Viparspectra XS2000 is working at 50% power. 💉🔍Fertilization schedule:🔍💉 14/12 eposom salts 2g/l foliar and 1g/l irrigation This new strain is hybrid produced from a cross between Sunset Sherbet x Purple Punch. It is a mostly indica strain, so, short flowering and big and dense buds! At the end of its flowering stage it will take a lots of colors, it is also beautiful to see!! I can’t wait to grow this strain! I’m excited like a child!! 🤓 🤓 We are glad to have the opportunity to try this strain from this experienced seed bank, we will do our best to grow this baby as well as possible. THANK YOU Barney’s Farm ❤️❤️❤️ ***WE ARE BACK!!! We are back after a little pause. We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night....*** 🤓+DATA SHEET+🤓 BLUE SUNSET SHERBERT™️ Cannabis Seeds Strain Specifications Type: Feminised Photoperiodic Genetics: Sunset Sherbet x Purple Punch Effect: creative euphoric sativa high + full body Indica tranquilising calming experience Indoor Yield (g):up to 650-700 gr/m² Flowering Time (days): 59 - 63 Taste: Sweet Candy, Citrus Aroma: Sweet Candy, Citrus Zest, And Sweet Berry 💸💸💸💸💸 Buy BLUE SUNSET SHERBERT™️: https://www.barneysfarm.com/blue-sunset-sherbert-551 _______________________________________________________________________ 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks to Emily of Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Eleen of Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA 💊💉💊FEEDINGS: We are growing in BioBizz Light Mix, it is perfect also for the first weeks. TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

Overall this was a wild grow. Had some ups and downs, trial and error, but at the end of the day I learned a lot and I’m going to keep on trying new things. Wish the solo cup challenge was still going on I totally would have won.

week 11

This was another very good week for the plants, with the flowers beginning to swell up and take shape. Some of the lower leaves are starting to yellow, but this is expected. As the light doesn't penetrate as far, the plant will begin to 'consume' those leaves and drop them to redirect energy to the tops. The canopy is fairly even apart from 1 small spot, which does not have any colas at all. This is due to me bending away the GSC that was topped, with the intention of the lower branches stretching up. This happened with all the other plants I did it to, but not this one for some reason. I think it was due to airflow around the budsites so I added an extra fan last week to hopefully improve this. The strongest looking plants by far are still the ones that were Topped with LST, followed by the mainlined, with only LST in last place. I have found that the LST only ones do not have stems as thick as the others, so this may impact yield later. Not much done in the way of training apart from the odd leaf bending or stem tying. The next few weeks will most likely be fairly uneventful, as now we just need to wait for them to flower fully :D

So it is still not over and we are going for an overtime for a good narcotic potency with approx. 10% amber trichomes. I have now, for the last and final highstress push for harvest, 3 hrs of 1000ppfd at the crowns and UV- addlights. This should immeadiatly start the oxidation of trichomes in a sprint distance of time. Additionally I also pushed with drybacks of 48hrs and then refill the trays for another 48hrs drayback until we switch of the lights for 48hrs of darkness, just for maximizing and saving terpenes and skunk- funk smelling. Meanwhile I have completed the first Runtz x Layer Cake harvest cuts in the drying growtent, it has been packed into terpeneloc bags and I will update the harvest soon. In the short clip you could see the first cuts of the already harvested crowns. Not the best cuts 😇😎

Week 3 and a repot is done and now in day 3. Finally it’s settling down after the repot, which was not pretty at all😂 Hope to get some massive plants this run 🌱 ________________________________________________________________________________________ Light from @MedicGrowLED 😎 NEO 780 LED🔥 780 Watt⚡️💥 PPF of 2184 μmol/s & 2.8 μmol/J🔥 Full Spectrum V1/F1 🌈 WiFi smart connection & Smart Aura Control 😱

First week of flower is over. She handled the light change and nutrient change without any issues. last bit of LST was completed and last major defoliation had also been done. From now on I will only defoliate when leaves are covering other shoots. She was already smelling strong before, but it keeps on getting stronger and stronger. Definitely not a stealthy strain in the smell department.

-Almost ready to harvest but trichomes not amber enough for my liking yet

The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had high temperatures of 79° and skies were mostly cloudy. The lows at night have begun to drop below 60°F. It has been extremely humid with tons of dew in the morning. I'll continue to defoliate and spray with biofungicide to get this powdery mildew under control. Day 2 we had early morning rain followed by mostly cloudy skies. High temperature was 77. The rain took care of the watering today. I'm treating with arber again and more defoliation. Day 3 we had a high temperature of 81°F, skies were partly cloudy, and I watered 3-4 gallons from the hose. Day 4 we had a high temperature of 83° with sunny skies. I watered 4-5 gallons from the well. I treated with Arber. Day 5 we had a high temperature of 88°F. Skies were clear and sunny. The humidity was around 90% today. I watered 4-5 gallons from the well. I finally got most of the infected leaves off and have one more plant to do tomorrow. I treated with Arber again today. Day 6 we had high temperature of 89°F. Skies were sunny. I watered about 4-5 gallons with well water. I've been treating these with Arber biofungicide but it's hasn't had much affect. I stripped all the infected leaves and lollipoped two today. I'll get the third tomorrow. I'll treat these tomorrow with growers ally fungicide and see if they can be saved. Day 7 we had a high temperature of 86°F with partly cloudy skies. We're expecting rain tonight and it's super humid today. The weather is not cooperating while I'm treating for powdery mildew. This week was a success. The plants gained on average 6 inches in height. They've slowed down their upward growth and are transitioning into flower. The weather has been atrocious for cannabis. These girls are super healthy but the humidity and cool nights have caused perfect conditions for powdery mildew. I began treatment with Arber biofungicide, but it wasn't doing much. I lollipoped and defolated heavy on two of the plant and finished the third after photos on day 7. The non infected leaves are responding ok to the Arber. I'm switching now and will treat late day 7 with Growers Ally fungicide. I defolated pretty heavy, but I expect a full recovery and increased production as there will be more light penetration.

She's doing well so far. I gave her another tps of Bat guano to increase the grow during stetching stage. I also switch my 7L pot to a 13L one. Next week she's gonna get only daylight so 11/12h a day in my area. The rain is falling every 3 days so when she's out she get an extra watering

Hello again, Week 14 update is here and we are still packing weight not with the same speed cause i stoped feeding at the start of the week but its going awesome almost no clear heads all trichomes are milky/white. No red head yet so i decided to try and close the lights for couple of hours and then start again for the final week.im thinking from everything that i have read this far ill plain feed water 10 day and 2 days without water and last 2 days without lights that will give me 14 flush days and hoping for the best. As you can see on the pics i had to turn the lamp to the side and put another one on the opposite end to see if i can push some more weight in there the last 4 weeks so now im actually using 600 hps and 250 hps with reflectors inside a 5x5 tent. Any advice welcome ty all . 😏

unbelievable, the performance of her in the still mixed weather in germany is awesome. the buds are starting to smell and are getting thicker. i'm a bit afraid that if the weather continues like this, mould will form. fingerscrossed that it doesn't happen. i give her a mix of biobizz root, grow and bloom every two days. I have removed the LST. from time to time I cut off the large leaves.

Happy 420

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone 😊. The lady was repotted 4 days ago and has developed very well since then :-). I let them take root for a few more days before I start training (topping) and add their GHSC Powder Feeding bio Grow 👍. Otherwise, as always, the tent was cleaned and the humidifier refilled :-). I wish you all the best ☺️ stay healthy 🙏🏻 You can buy this Strain at https://www.barneysfarm.com/blue-cheese-34 Type: Blue Cheese ☝️🏼 Genetics: Blueberry X Original Cheese 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Bio Bizz Coco ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8

📆 Semana 6 La floración sigue avanzando y los cogollos empiezan a ganar más cuerpo, manteniendo esa cantidad de resina que ya destacaba desde la semana anterior. La estructura floral se va definiendo cada vez más y la planta continúa respondiendo muy bien al sol directo. Mantengo una nutrición moderada, acompañando esta fase de engorde sin forzar el ritmo de la planta. ⚡ EC: 1.0 💧 pH: 6.2 🌡️ Agua: 21°C 🌫️ Humedad: 45 - 55% 💡 Intensidad: Luz directa del sol 🔥 Nota de cultivo: Aunque los cogollos todavía no son grandes, la cantidad de resina empieza a ser uno de los puntos más llamativos de la planta. Ahora toca dejar que sigan ganando volumen y densidad durante las próximas semanas. Seguimos creciendo fuerte 💪!

04/11 - (M) - As stated on my last update mom came back strong from losing a week with no feed because of drip emitter malfunction - Ran a hard defilation to remove dead or dying leaves - Res was cleaned out and reloaded with a fresh nute feed clean water heavy. 04/11 - (C) - The babies came back from the PPM burn as previously stated - Had some yellowing going on as well but after flush and slow dose nutrient/clean water feed their green is coming back strong. 04/18 -(C) - In not trying to stress the babies anymore then they have already have I flipped them into flower today - The Veg rebound was successful but very draining - I will prep for flushing to transition into flower feeds.

Hey guys! Thanks for stopping in to check out my babies! This is week 2 of flower (days 8-14). This week things really seemed to take off! 🔥 Plants were happy all week long and seemed to grow almost an 1” per day if not more. Buds are developing nicely, no smell yet but nice to see them stackin’. I cut out anything under the trellis that would end up being popcorn buds so the plants could focus on the main colas. Hoping I’ll just have to pull a few leaves here and there from now on. The New Floraflex drip system has been nice! 💯 It has made watering easier and more automated. Water distribution isn’t perfect but I’m sure they aren’t 100% level either. Plants should stop stretching after this next week and should start putting on some size! Stoked to see what these girls can do in week 3! Day by day break down: Day 8 Cut out some lower growth/ leaves blocking bud sites Day 9 Fed all 6 plants. PH: 6.11, PPM: 1136 Day 10 Plants look great. Let them do their thing. Day 12 Fed al 6 plants. PH: 6.05, PPM: 1264 Day 14 sitting at 29” tall right now. Not so stressed on height being be issue. Thinking they might be around 35-40” tall at the max. Stay tuned for next weeks post to see how much these ladies have thickened up!

End of day 35 flower Had an issue with cal/mag deficiency with the White Widow so I had to flush her and increase cal/mag to 5ml/gal. So she should be back on track to produce fatter buds. Royal Gorilla isn't fattening up so hopefully she will this coming week. Also gave her a good flush with some florakleen. Defloiated so the buds on the bottom can get more light. Thanks for taking the time to check on my grow. Peace out!!