Likes
Comments
Share
@Pblc_10
Follow
In den letzten Tagen zeigten die Jealousy-Pflanzen deutliche Aufhellungen und rostige Flecken an älteren Blättern. Zunächst wurde von einem pH-Problem bzw. Phosphormangel ausgegangen, da die Symptome untypisch und punktuell stärker wurden. Nach genauer Analyse von Düngeschema, EC, pH und dem zeitlichen Verlauf stellte sich jedoch heraus, dass es sich um einen ausgeprägten Calcium/Magnesium-Mangel handelte, verstärkt durch eine Unterversorgung in der Blüte. Ursache war, dass ich mich ab Blütewoche 5 vertan habe und über rund zwei Wochen nur ca. 1 ml Bloom (plus Zusätze) gegeben habe, obwohl 3 ml laut Schema nötig gewesen wären. Dadurch entstand ein schleichender Mangel, der erst verzögert sichtbar wurde und fälschlich wie ein pH- oder Phosphorproblem wirkte. Der pH-Wert lag im Nachhinein betrachtet korrekt im Bereich um 6,2–6,3, der EC war ebenfalls nicht kritisch – die Pflanzen hatten schlicht zu wenig verfügbare Nährstoffe, insbesondere Ca/Mg. Nach gezielter CalMag-Gabe (ca. 0,3–0,6 ml je nach Pflanze) zeigte sich innerhalb von 24–48 Stunden eine klare Reaktion: neues Wachstum wurde wieder grüner, das Fortschreiten der Symptome stoppte. Bereits geschädigte Blätter rosten weiter, was als normal einzustufen ist, da diese Schäden irreversibel sind. Aktuell befinden sich die Pflanzen im Endstadium der Blüte. Die Trichome sind überwiegend milchig, kaum amber, was auf eine verbleibende Reifezeit von etwa 5–7 Tagen hindeutet. Keine weiteren Korrekturen geplant, Fokus liegt nun auf Stabilität bis zur Ernte.
Likes
11
Share
Likes
33
Share
@Hawkbo
Follow
Autos are just starting to flower the photos are dying for some bigger pots. I've been trying to bring up the overall plant health in general since moving everything to a basement the temps are a little lower than ideal. I had a space heater delivered today and monitored the temps but they only went up to around 78°f I want it to be atleast 82°f ideally 85. The heater uses 1500 watt and only increased it about 2 or 3°. I dont think it's worth the extra cost for such little boost. I'm thinking about returning the heater and throwing a 1000w hps in one of the other tents and see if that will raise it anymore. Especially with LED and co2 higher temps would be very beneficial in veg and early flower but the room is so big its gunna be tough to pull off without killing me on electric costs. Any suggestions are welcome. I know this room does decent in flower but I havnt done much veg work down here and I'll have some autos growing this round so it's important I get it up.
Likes
1
Share
@Zakki
Follow
Likes
2
Share
First week flower have moved them inside under the marshyrdo had to stuff them in there cause I had so many but I have loollipopped them all to make sure I have good air flow at the base topped a few aswell to compare them to u topped ones will be fun to see what works better
Likes
20
Share
Likes
3
Share
Bilder und weitere Informationen folgen im weiteren Verlauf. Ich bin soweit zufrieden, die Ladys hängen jetzt zum Trocknen.
Likes
8
Share
@Kirsten
Follow
26.12.24: I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️
Likes
8
Share
@Spliffi
Follow
Heya👍🤙👍🌱 The stretch is done. Check out my Facebook profile: https://www.facebook.com/share/v/H6PnoahTHrEzm63U/?mibextid=oFDknk Big BIG BIG thank you to Sebastien, Heather from Fastbuds420. You guys are the best. Can't wait for the next live. Even Bigger shout out to Hydroponic.co.za. My local Hydro Shop and Sponsor. Thank you Sir. 👍🤙👍🌱
Likes
3
Share
First week under big light, and in big pots. The light is at 50% giving me an average 550umol at 2ft. The ec fans are running about 50%. Total power consumption is around 600w so costing about 0.10 per hour to run.
Likes
9
Share
Slightly Light amber, but I'm cutting her. She really looks ripe. Also an infestation of sap eaters, so the plant is at it's end. The plant with long stem is not even 48 grams, very disappointing! Very thin flowers. Maybe if I'm lucky, I will have 10 gr 😞😞😞
Likes
6
Share
🇩🇪 Ich war dann doch neugierig und hab mich dazu entschieden nach einer Woche einen Teil der restlichen Erde und den Rand vom Airpot zu entfernen um mal zu schauen wie sich die Wurzeln in dem Bereich machen. Und tatsächlich mehr oder wenige wie geplant und am Ende durch das verrutschen der Pflanzen oberhalb der Erde auch wie erwartet nicht ganz perfekt aber dennoch bin ich für den ersten Versuch sehr zufrieden. Auch wenn die Wurzel nicht von Fingerspitze zu Fingerspitze geht und sich der Stamm nicht mehr zur Seite sonder mehr nach oben verwachsen hat. Ist sie trotzdem sehr gelungen. Und kann sich die nächste Zeit erstmal wieder erholen und wird nur hier und da in Form gehalten. Happy growing💛✌️ 🇬🇧 I got curious and decided after a week to remove some of the remaining soil and the edge of the Airpot to see how the roots were doing in that area. And indeed, more or less as planned, and in the end, due to the plants shifting above the soil, it wasn't quite perfect, as expected, but I'm still very happy with it for the first attempt. Even though the root doesn't stretch from fingertip to fingertip and the stem has grown upwards instead of sideways, she still turned out very well and can now recover for a while and will only need occasional trimming. Happy growing! 💛✌️
Likes
20
Share
dry weight of buds after trimming = 93 gram and about 5 gram of Trim so 98g Total. Actual plan was to leave the plant some more days but after seeing some Nanas developing inside the buds i decided to cut it at day 65 of flower. great smell and cant wait to smoke the final product. All in all definetly a good strain for living soil.
Likes
29
Share
Inizio Terza settimana di fioritura 💪🕉️💚.. tutto procede come deve .sono sicurissimo che questa layer cake, sarà fantastica....perfetta per la mia patologia...la meglio medicina per me
Likes
52
Share
Flowering day 25 since time change to 12/12 h. Hey guys :-) . The ladies are developing more and more beautiful and fat week after week 😊. The tent fills up perfectly 👌. I removed the bottom shoots to allow the energy to flow to the top buds. This week it was watered 3 times with 1.3 l each (nutrients see table above) Otherwise everything was cleaned and checked. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
3
Share
Ho iniziato a fare lst del primo secondo internodo gli altri li farò inseguito cosi cerco di allargarle il piu possibile in modo tale che la luce prenda tutti i nuovi getti
Likes
22
Share
@Aeromax
Follow
Hey 👻 After many months without updates, here's a little one. These are the originals mother plants, i took 100's of clones out of em and then flipped to bloom 2 months ago. Here's a few pics of different bloom stages 👆 I began flush today after aprox. 60 days of bloom, i'm looking fwd to cut in 7-10 days, depending on trichomes 👍 I'm not expecting a big harvest but at least a quality one ! I kept a few phenos of Peach Tree, Pink Gasoline and L.A. Kush Cake 🙌 I'll post a final update when i'll harvest 😉
Processing
Likes
62
Share
February 14, 2019 update: I rearranged the plants to get better airflow. In the video I mentioned that I thought I saw what might be spider mites. After closer inspection, I don't think its spider mites but more likely a combination of left over damage from the fungus gnats that came in with my wife's plant a few weeks ago (now gone) as well as ph fluctuations. But I like getting airflow on the plants themselves anyway, I just wish the oscillation worked on the fan I have now. I'll buy a new fan or two with oscillation soon. Also I failed to mention it in the video but there is also a ceiling fan blowing down on the plants. Overall, I'm very happy. The DinaMed CBD+ has taken the lead in the bud development category, Nice fat buds that are very dense. Sticky and stinky as hell too. She is supposed to be somewhere in the teens for CBD percentage and less than 1% THC. I'm hoping she either comes in below 0.3% or has well over 1%. I'm allowed to submit for testing 3 weeks before harvest. I'm going to cut a mid level branch and submit for testing next weekend. My other DinaFem strain, Critical +, is doing great too! She's in the lead with the most trichome development. Her buds are coming along great also! Not super fat, at least not yet, but great shape, color, density and have I mentioned the trichome development yet? 👍 This one is supposed to have mild CBD, low single digits, but high THC. I'm looking forward to smoking this one! Next up I'll talk about my Cream & Cheese CBD+ from Seedsman. She's in the lead with just overall looking awesome!!! The buds are long and super healthy looking with tons of leaves along the branches and I've defoliated a few times. The remaining leaves don't seem to be blocking much because most branches are bent over due to the weight of the buds! She is supposed to be in the 20's with BOTH THC and CBD. I'm looking forward to smoking this one also! 💪 That leaves the 3 Cherry Hemp plants. They are the smallest 3 plants in the room, but are all looking very good as well. They look like they are in the lead with possibly being ready to harvest earliest. I'm seeing the most amount of darkened and curled in hairs on these 3. The largest/oldest of the 3 is starting to show fading on the leaves. She may be ready in the next week or two. I'm waiting to start seeing some amber trichomes, so far they are still all white. These are supposed to be around 16% CBD and less than 0.3% THC. I'll be taking these in for testing soon and will be using these strictly for making CBD products - Salves, Oils, Capsules, etc... I'll keep you posted on this. This week I fed MegaCrop and Cal-Mag Pro (both by Greenleaf Nutrients). I fed according to their feeding schedule for late bloom. I think I'm going to stick with Greenleaf Nutrients for the duration of this grow rather than changing it up as I have been. Its super easy stuff to work with. 👍
Likes
5
Share
Plants are currently drying 2+ months later. And next project au79