Likes
Comments
Share
I'm starting pre-flowering, letting it adapt and revegetate a bit. I would have liked to give it more, but I've learned my lesson for next time, maximizing my results. I'm waiting for some Under Canopy lights to try them out and I've been trying to finish the grow room. And I need to change this SCROG net; I didn't like it, you can't guide everything properly.
Likes
1
Share
Day 43-49 A lot of them are showing signs of going into bloom. Doing their stretch before bloom, so they need more nitrogen before they're done stretching. My own unbiased opinions about deep water culture.I love it.It's got the precision I need and control. If you like something more relaxed, living soil is your thing, but this is mine.I'm enjoying it.Everything's growing people have already done the research.I just gotta apply it.
Likes
16
Share
Likes
21
Share
End of week 7! This plant is looking amazing. Done giving it all the nutrients just the base and overdrive to finish her off. 2 more weeks I'd say and we are harvesting!
Likes
5
Share
Flushing is in progress. Big buds plant. Small yield
Likes
5
Share
Started some light LST....... trying to expose those lower future Bud sites
Processing
Likes
12
Share
The first pistil showed up! Nice! I look at it 24 hours a day hahaha
Likes
13
Share
Happy New Grow Year 🎈🌿🌹🌺🌻🔥🤩😍 to all my fellow Gromie's may it be a joyful & bountiful & of course quality new grow year. The 2 Orange sherbet clones are powering on! #1 is going to really fill out the space In the flowering tent 🤩 she is going to go nuts in flowering stretch! #2 going great as well. Unfortunately I should have have replanted the clones earlier last week when photos were taken as they were very healthy. But after checking on them 1 night, came in next night to find I hadn't turned the pump back on! & Yeah the heat had gotten to them a bit, have been replanted into final homes, put into veg tent, the 2&3 stem clones have suffered & dying off. Obviously couldn't support all the growth of 2& 3 stems being a bit unhealthy. The single stem clones are all coming back to health. Had planned to grow 3 Afghan kush, which didn't germinate ( seeds mafia) , & thankfully I've got these 2 girls to put into flower in the next few weeks once the flowering run is done. Was supposed to have 4 plants ready to go in & replace the ones that get harvested , going to start some new FF strains.👍
Likes
10
Share
Another good week getting ready. They are all very well, as envisaged last week I will switch to Extreme mode of the table Aptus. I hope not to make mistakes, my mixture is ready but I find it very busy, but I tell myself that I follow the guide Aptus. We'll see 😥😱
Likes
5
Share
@Ninjabuds
Follow
A sturdy plant with large buds it gonna be some good smoke it has some super sticky buds with a strong pungent fruit smell
Likes
4
Share
@babaweed
Follow
These kush are really beautiful and have huge peaks, they have 13 internodes and each of them is full of buds, quite large. They are really huge touch the ceiling, maybe one is too close to the lamps and I'm afraid you burn a little bit
Processing
Likes
27
Share
The plants have reached a stage where they have enough foliage and growth on them to begin training and defoliation. I cut most of the side growth and major fan leaves off. Using safety pins and twine, I started their LST.
Likes
7
Share
@Drtomb
Follow
Week 5, just took down the othwr side. Was experimenting with bleach for sterilization. Unfortunately it resulted in an extremely poor yield, from one of my big producers. Have switched over to a benificial bacteria mix, which includes some molasses, folic acid, Humic ac8s and sea kelp. Product is called Hydro Bio
Likes
92
Share
Week 3: TrolMaster Chronicles – Transplanting, Growing Strong, and Thriving in PRO-MIX HP 🌱✨ Hey Grow Fam! Another exciting week has flown by in the grow room, and I’m thrilled with the progress! We kicked off Week 3 with our first set of transplants. The Gorilla Melon was transplanted at the end of the week, while the Papaya Zoap is still patiently waiting for its turn to shine. Each plant that’s been transplanted is now comfortably settled in 15-liter Autopots, filled with PRO-MIX HP BIOFUNGICIDE + MYCORRHIZAE, and wow, I’m loving this mix! 🌱 Why PRO-MIX HP is a Game-Changer For those of you unfamiliar with PRO-MIX HP, let’s take a closer look. This soil provides superior drainage and aeration, thanks to its high porosity. The addition of fibrous peat moss and coarse perlite creates an ideal environment for water flexibility. It’s been perfect for the girls as they transition into their final homes. Plus, the biofungicide and mycorrhizae are doing wonders for root development, giving them all the support they need for vigorous growth. The plants are showing off a beautiful, vibrant green, each with its own unique characteristics—no two plants are the same, and I love that! 🌡️ Environment Update: Temps, RH, and More Let’s talk about the conditions the girls are thriving in! We’re sitting at: • Temperature: 26.7°C • Relative Humidity: 62.9% • VPD: 1.30 (I know it’s a bit high, but they’re handling it like champs) • CO2: 800 ppm • pH: 6.18 • TDS: 215 ppm • Solution Temperature: 23.2°C To make things even more efficient, I’ve adjusted the light height, keeping the PPFD around 360 to 400 to save on energy. These beauties are still soaking in the light perfectly, and I couldn’t be happier with how they’re responding. 💧 Watering and Feeding At this stage, the plants are thriving with just enough nutrients to keep them happy. I’ve kept things simple with a balanced solution, ensuring everything stays within the perfect range. The PRO-MIX HP, with its mycorrhizal fungi, is really helping with nutrient uptake and boosting overall health. It’s amazing to see how quickly they’ve adapted! 🌟 Transplants Complete – Progress Feels Incredible! I’m super excited with how everything is shaping up! Most of the transplants went smoothly, and the growth we’re seeing is just amazing. The Papaya Zoap is still waiting for its final move, but it’s growing strong, getting ready for the next step. It’s an honor to work with these genetics—they’re each unique, yet all thriving in their own way. 🌱💚 🌍 Shoutouts and What’s Coming Next I couldn’t do this without the support of my amazing sponsors and all of you, Grow Fam! A huge shoutout to TrolMaster and Aptus Holland for their top-notch gear and nutrients, and of course, to all my followers—whether you’ve been here from the start or are new to the journey, thank you for the love and support! 💚🙏 Don’t forget to check out my Instagram and YouTube, where the Seed to Harvest Series just kicked off! I’m going deep into all the gear, techniques, and day-to-day grow updates you see here. Exclusive content and more are waiting for you on those platforms, so come by and join the fun! Growers Love to everyone, and here’s to another epic week of growth! 💚🌱 Let’s keep pushing the limits and making magic happen. • Nutrition: @aptusholland @aptus_world @aptus_es @aptusbrasil @aptus_thailand @aptus_portugal @aptususa_official @aptusplanttechnz @aptusplanttechaus • Controls: @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro • Soil: @promix_growers_eur @promix_cannabis @promixmitch P.S. Let’s talk about these new Model One LED bars I’m running. 🌿💡 They’re not just any lights—these are full-spectrum beasts designed to give my plants exactly what they need at every stage of growth. The real magic, though? The dimming feature. With just a quick adjustment, I can dial down the intensity without sacrificing the quality of the light. This means I’m saving on energy costs while still delivering top-tier PAR and maintaining a balanced spectrum. It’s not just about blasting plants with light; it’s about giving them the right light at the right time. By fine-tuning the PPFD (Photosynthetic Photon Flux Density), I’m hitting that sweet spot where the plants thrive, and I don’t have to run the LEDs at full power. So, while I save a bit on electricity, my plants still get the perfect environment to reach their full potential. 🌱✨ This level of control lets me optimize the growth, and trust me, my plants are loving it—just another reason I’m thrilled with the Model One setup. 💚💚💚 Growers Love everyone 💚💚💚
Likes
43
Share
Started using magic evolution foliar Spray. Once a week until 2nd week of flowering. Day 19, pot was dry fed just over a litre. Day 21. Fed just over litre. LST
Likes
3
Share
@Ninjabuds
Follow
My new Gro pros solutions under canopy lights are really making the colors pop
Likes
1
Share
Get yourself some top Shelf clones from krummegurkenstecklinge mit dem Code „The710“ you can get 10% off your purchase
Likes
5
Share
@AustinRon
Follow
TH 1Q2025 - Week 4 - Bolt I 
(ON Haze X Original Haze) X Northern Lights #2 “Todd’s Haze” Objective - 8 Female Plants, Topped ONCE @ Flip, 12” when topped - Modified Sea of Green Seeds Wet: 1139PM, 28.2.2025 Germinated: 2.3.2025 Flip: 21.3.2025 Harvest: 77 Days, DATE: 6.6.2025 _________________________________________ 
Weeks Summary: - Photos indicate we’ve been overdriving our plants. Lime - Yellow Green, Stressed lowers. NOT Relaxed. - Tue - EOW We’ll run moderate light, Low-Moderate Feed (EC: 1.1) __ Fri Mar 28, 2025 TH 1Q25 8:B:1:1 All plants have lifted, with minor praying at least.  Applied Remaining Gallon of Root Steering solution. TODAY we switch to Rooted Leaf Medium @ 1.3 mS/cm. At this point the Coco should be WELL BUFFERED with CalMag - Reducing Calcium to normal level, we should be able to run w/ NORMAL Calcium levels, no boots. We’ll see We need - more nitrogen evident in the plants - to get from 351 - 750 µMol/m2/s - To ramp EC from 1.2 - 1.6 When the girls are receptive . . . __ Sat Mar 29, 2025 TH 1Q25 9:B:1:2  PRE-CUT Foliar of MOMs (15 Min before taking Cuts): [ 1, pt] - Cal Mag Fuel: [ 2.5, ml] - Lush Green: [ 0.625, ml] - Resin Bloom: [ 2.5, ml] Wrap Label below Top Node Top to Node 3, Cut plunged in water - [x] 8 Cuts, “Todd’s Haze” - [x] 2 Cuts, Lemon Jeffery Dip Tray - Rooting Powder, Aloe Gel - Top + 2 Nodes Cuts to Rooting Cubes - Cut 45° just below 2nd Node - Gently Abrade cuticle of stem below 2nd Node - Dip END in - Rooting Powder - Beauveria Bassiana - Fresh Aloe Vera Gel - Afix IN Prepped Rooting Cube - 1/4” from BOTTOM NOT THROUGH - Place in Rooting Tray, Cover “Cut Foliar Solution” When All cuts in Dome, Foliar (1 pt) w/ - PCAL 1660: [ .25, g] - KelPak: [ 1, ml] - CalMag Fuel: [ 1, ml] # Acidification of PCAL 1660 - Photosynthesis Plus: [ .75, ml] DAILY UNTIL ROOTED - - [x] Verify Rooting Cubes are adequately hydrated - [x] Light Foliar with Cut Solution Take Cuts WHEN All Phenos are WELL into 6 Nodes - When ALL Cultivars have At Least 6 Nodes: - Top to 3 - Use Crown as Cut for Labeled Pheno - [x] Prep Cut Dome - [x] Pull Seedling Mat (78°F) for use UNDER Cut Dome - [x] Rooting Prep - [x] Rooting Powder - [x] Beauveria Bassiana - [x] FRESH Aloe Vera Gel - [x] Root Riot Cubes MOISTENED / NOT WET Cut Spray Solution - [x] KelPak: [ 4, ml, gal] - [x] PCAL1660, [ 2, g, gal] - [x] Photosynthesis Plus, [ 6, ml, gal] - [x] Check All Pots for Emergent Roots Once we’ve roots at EACH pot - Switch to Normal Fertigation . . . Fertigation: 1 Gal, EC: 1.2-3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml]  __ Sun Mar 30, 2025 TH 1Q25 10:B:1:3 Fertigation: 1 Gal, EC: 1.2-3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] TM-7 (µNutrients): [ 0.5, tsp] # Teabag Style Infusion  __ Mon Mar 31, 2025 TH 1Q25 11:B:1:4 Fertigation: 1 Gal, EC: 1.3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] IF Initial appearance at Lights on doesn’t suggest “Relaxed, supple,” we’ll run @ EC: 1.1 Until resolved . . . __ Tue Apr 1, 2025 TH 1Q25 12:B:1:5 We’re Running Lowered Light. And reducing EC to 1.1 until we’ve plants that seem REALLY HAPPY. Fertigation: 1 Gal, EC: 1.1 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 3.0, ml] - [x] Silica Skin: [ 2, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] TM-7: [ 0.5, g] - [x] Quillaja 60 Powder: [scant] - [ ]  __ Wed Apr 2, 2025 TH 1Q25 13:B:1:6 EC: 1.1 LightIntensity: [ 400, µMol/m2/s] We only watered 220 / plant, about half of what we’ve been delivering. Foliar: # 1 pt Spray Bottle @ Lights ON - [x] Solar Rain: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Photosynthesis Plus: [ 1.5, ml] - [x] Quillaja 60 Powder: [scant] __ Thu Apr 3, 2025 TH 1Q25 14:B:1:7 EC: 1.3 LightIntensity: [ 401, µMol/m2/s]. # Staying low, waiting for plants to resolve Fertigation: 1 Gal, EC: 1.3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2, ml] - [x] Silica Skin: [ 2, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Kelpak: [ 4, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant]
Likes
11
Share
@Haoss
Follow
Buds should be dried in the dark at 20 degrees in 50% humidity